Gecko-Cam Professional Cameras Munich Instruction Manual
When changing the projection lamp let the projector cool down before touching the lamp and the surrounding parts.
The projector must always be placed on a stable support. Keep all ventilation openings free.
Mains voltage: see projector nameplate.
Use only accessories which are designated as suitable for this unit in their instructions. Before connecting the projector with the mains make sure that the voltage of the unit corresponds to the mains voltage.
The projector, even when switched-off, is not completely disconnected from the mains as long as the plug is in the mains socket. Disconnect the projector from the mains when not in use. When removing the cable always touch the plug only, not the cable. If any liquid or solid object is found to be in the projector disconnect it from the mains and get the unit checked by a service man before using it again. The mains cable must only be replaced by an authorized service agency.
To avoid danger of fire or electric shock the unit must not get in contact with rain or excessive humidity.
To avoid electric shock never open the unit. All service has to be executed by an authorized service agency.
To avoid any damage by heat make sure that there is always sufficient air ventilation around the projector. When using the projector never look into the light directly. This may cause irreparable eye damages.
Get pdf Gecko-Cam Professional Cameras Munich
