Free Gadget Manuals: 03/26/10

Freescale MPC555 PowerPC Microcontroller Board Users Manual

Freescale MPC555 PowerPC Microcontroller Board Users Manual

the PB-0555 is a Freescale MPC555 PowerPC Microcontroller module with I/O pin headers, oscillator circuit, power supply, and RS232 COM port. The MPC555 high integration processor architecture has been designed for high-performance and low-cost embedded control applications. A version of the PB-0555 can be used on the CME0555 Development Board, in your own application hardware or as a single chip stand alone controller.

Board Features:
• Simple Monitor and CMFI Programmer in MPC555 Flash (self protected)
• Single Chip Operation
• All I/O and Bus to Header Connectors
• 4MHz Reference Crystal Oscillator
• RS232 Level Serial Port
• +7-20V Input Power Supply
• Prototype Area

Get pdf Freescale MPC555 PowerPC Microcontroller Board

SK-26H520S Widescreen HDTV User’s Manual

Your TV is designed with the latest technology and is a high-performance unit that includes the following special feature :
Multi-sources input included RF IN, D-SUB, HDMIx2, Compositex2, S-Videox2, and Componentx2.
Built-in combo tuner is able to receive ATSC, NTSC and Clear QAM Cable signals.
Built-in 10W dual channel speakers.
Embedded video enhance and noise Reduction features for the colorful and clearest picture possible.
Provided multi-channel sound decoder for stereo and bilingual broadcasts.
Automatic sleep timer control.
Component video input for high definition TV programming (HDTV ready), resolution up to 720p, 1080i.

FUNCTION KEYS
1. MENU : Display the main menu. When OSD is appeared, press the button to select or access the sub-menu.
2. VOLUME (+ / -) : Increase/decrease the volume or be the left/right arrow button for menu.
3. CHANNEL (+ / -) : Change the channel or be the up/down arrow button for menu.
4. SOURCE : Select the input source ( TV, S-Video1, S-Video2, Video 1, Video 2 , YPbPr 1 , YPbPr 2 , HDMI1, HDMI2, PC ).
5. POWER : Turn the LCD-TV on or off.
6. REMOTE SENSOR WINDOW : aim the remote control towards this spot on the TV.
7. POWER INDICATOR : BLUE LIGHT ─ power on AMBER LIGHT ─ power sleep EXTINGUISHED ─ power off

Get pdf SK-26H520S Widescreen HDTV User’s Manual

Turbo Fan Cooled ARC Welder 40 -160 AMPS User Guide

Power Craft products are manufactured to high quality standards and they are safe and fit for purpose at the time of sale, but all tools and machines can be dangerous if the correct precautions are not taken. Arc welders provide a simple and portable solution for many welding requirements. They are safe if used with care, always follow these instructions, do not carry out the operation until you are sure you can do so in safety. Remember to consider the working environment for safe operation in addition to the safe operation of the machine.

Cleaning & maintenance
Check for damaged parts
Do not use the welder with damaged parts, before further use a damaged welder must be carefully checked by a qualified person to determine that it will operate properly. Check for breakage of parts, mountings and other conditions that may affect its operation. An authorised service centre should properly repair a damaged part. Have your welder repaired by an expert

This appliance is manufactured in accordance with relevant safety standards. Only experts must carry out repairing of electrical appliances, otherwise considerable danger for the user may result. Use only genuine replacement parts, which are available from the Helpline
Do not use modified or non-genuine parts
Replacing welding cables
WARNING!
BEFORE MAKING THE FOLLOWING CONNECTIONS MAKE SURE THE WELDING MACHINE IS SWITCHED OFF AND DISCONNECTED FROM THE POWER SUPPLY OUTLET.
It is strongly recommended that genuine replacement cables be used. These are available from the helpline.

Storing the Welder
When not in use the welder should be stored in the dry, out of reach of children and in a frost-free environment.
Ensure the items are disconnected from the electrical supply and cannot operate accidentally when, servicing or cleaning.
The machine does not require any special maintenance; however the user must be aware of the following:
• Regularly clean the ventilation slots.
• Keep the casing clean.
• Check all cables before use.
• Check electrode holders and earth clamps before use.
• Replace worn electrode holders and earth clamps, which do not provide a good connection

Get pdf Turbo Fan Cooled ARC Welder 40 -160 AMPS User Guide

Miditech Audiolink Pro USB Owner’s Manual

Miditech Audiolink Pro, we are certain you will be delighted with its performance and advanced features. This interface brings an unparalleled level of USB audio quality to a Mac or PC, with pristine 24-bit/96kHz A/D and D/A converters, ultra-low jitter clock, and low noise mic/line/hi-Z preamps. Audiolink Pro enables you to easily digitize all your analog sound sources, to record microphones, instruments and any LINE level devices, e.g. music cassette decks or CD players etc. Not only does Audiolink Pro offer a simple solution to digitizing analog sounds, it also gives you the very best HiFi audio quality. The included recording software Magix “Samplitude SE” offers you the capability to edit previously digitized music or speech. These operating instructions will give you some guidance on how to install and operate your Audiolink Pro functions, also check the section on how to use the free bundled companion Magix program - “Samplitude SE”.

Audiolink Pro technical data and features:
Simple computer connection via USB
“Class Compliant” device - NO driver installation necessary, runs directly under Windows
2000 SP4, Windows XP SP2 and Windows Vista
24 Bit AD/DA Converters
Sample rate 32.0 kHz, 44.1 kHz, 48.0 kHz and 96.0 kHz
Outputs ¼“ and stereo LINE: dynamic range: >100 dB (typical, -60 dB input,A-weighted), signal-to-noise ratio: >100 dB (typical,A-weighted) , THD -87 dB (typical)
Inputs XLR MIC (balanced): dynamic range: >100 dB (typical, -60 dB input,A-weighted), signal-to-noise ratio: >100 dB (typical,A-weighted) , THD -80 dB (typical)
Inputs INSTR./LINE (¼“ balanced): dynamic range: 96 dB (typical, -60 dB input,A-weighted), signal-to-noise ratio: 96 dB (typical,A-weighted) , THD -78 dB (typical), high- impedance (for electric guitar & bass)
Stereo-LINE-input (¼“ balanced), Input Channel Gain Knob: +40 dB max
Input Channel LEDs: Clip (Red) and Signal-Present (Green)
Stereo-LINE-output (¼“ balanced, -10 dBV nominal, +1.7 dBV max)
2 XLR Microphone: balanced with switchable Phantom Power (+48 V)
Adjustable stereo headphone output for headphones.
USB Powered, i.e. power supplied via USB connection of the computer

Get pdf Miditech Audiolink Pro USB Owner’s Manual

GH327 Interface Board Reference Manual

The GH327 Interface Board provides either a stand-alone FM RDS application device, or an interfacing bridge to other devices via either a UART interface, or an XBee ZigBee RF module. The board uses an 8-bit AVR MCU to control all the interfaces, including the FM board. The MCU can be reprogrammed via an ISP header on the board. The GH327 Interface Board also contains a RS232 transceiver converting the UART interface into a PC compatible RS232 port. Lastly, the board should be powered by a 5V source of at least 100mA.

Component Descriptions
MCU: ATMega644
The ATMega644 is a general purpose MCU with a rich set of peripherals built in. The processor is clocked with an external 8MHZ crystal, but a value of up to 10MHZ can be used. The MCU features a built-in Flash and EEPROM memories. The flash is used to store code which can be reprogrammed via the ISP header on the board. The EEPROM memory can be used by the application programmed into the chip, one such application is to provide a unique ID to each board as no unique hardware ID exists on the board.

The ATMega644 is the heart of the board, it interfaces to the FM RDS chip, as well as the UART bus. The MCU makes use of the UART bus by a built in UART peripheral. The UART bus can be used in two ways, either to interface to the XBee ZigBee radio, or to interface to an RS232 port through an RS232 transceiver. The UART peripheral can be programmed via either interrupts, or polling. The interface to the FM RDS chip is realized with the use of an I2C peripheral also built into the ATMega644. The bus is pulled up sufficiently via resistors to allow for the maximum 400Khz communication speed. Like the UART peripheral, the I2C can be programmed using interrupts or polling as well. Please refer to the ATMega644 datasheet for more information on these peripherals, and others.

Get pdf GH327 Interface Board Reference Manual

GSM / GPS Telemetry System WP-RF-25X-R1 Series – User Manual

The following definitions are used throughout this document and generally in connection with the control unit.
Message
An SMS (‘text’) message sent from one mobile station to another.
Denotes a ‘space’ in the format of a message. Alphanumeric.
Characters in the range A to Z (upper and lower case), numbers in the range 0 – 9. Mobile.
A mobile telephone that is used to send and receive SMS messages.

SIM card
The unit will accept SIM cards of most types subject to the following restrictions.
1. Only 3 volt SIM cards will be correctly read and older 5 volt types will be ignored.
2. Some types of pay-as-you-go SIM cards may require regular call activity (once every six months) to remain registered.
3. SIM cards purchased from RF Solutions can be topped up by credit or debit card by calling Virgin Mobile Customer Services on 0845 6000789.
4. SIM cards that have been protected by means of a PIN (in a mobile phone) will not operate in the unit.
5. Incoming voice calls to the SIM card should be barred before it is used in the GSM 250 unit to avoid any error messages being sent back the user. This can be achieved by calling the service provider (0845 6000789 – Virgin).

The SIM card should be inserted into the tray, which slides out of the side of the modem. On no account should the modem be removed from the PCB during this process since the connector between the modem and the PCB is easily damaged. To remove the tray the user must depress the small plastic tab to the right of the tray and pull out the tray.

Get pdf GSM / GPS Telemetry System WP-RF-25X-R1 Series – User Manual

Mini Compact Two Ports USB KVM Switch User Manual

Thank you for purchasing the compact USB KVM switch. KVM switch can saveyour TIME, SPACE, EQUIPMENT andPOWER. Controlling multiple USB PCs from One PS/2 Keyboard, PS/2 Mouse and VGA Monitor or One USB Keyboard, USB Mouse and VGA Monitor. USB KVM switch is loaded with features such as hot key control, push button control and Console could be USB keyboard (or USB mouse) or standard PS/2 keyboard (or PS/2 mouse). USB KVM switch also supports extra two comprehensive USB type A ports (if you use PS/2 console ) for user to share more USB peripherals. USB KVM Switch is compatible to AT, PS/2 style computers, SUN Microsystems computers,G3/G4 MACs or iMACs with USB port. All of USB ports of KVM switch are compliant to USB 1.1

Specification.
- Two ports USB KVM switch, compact size design
- USB 1.1 Specification compliant
- Support UHCI, OHCI USB interface
- USB console works with Win98/98SE/ME/2000/XP, WinNT, HP Unix, Linux Sun Solaris, MAC O.S 8.6 or later version
- PS/2 console works with Win98/SE/ME/2000/XP WinNT, HP Unix, Linux, Sun Solaris, MAC O.S 8.6 or later version
- USB KVM switch is embedded with two USB device ports (if you use PS/2 console ) for computers to share different USB peripherals.
- Manage multiple PCs, G3/G4 MACs, iMACs from one USB keyboard (or PS/2 keyboard), USB Mouse (or PS/2 mouse) and Monitor.
- Add PCs or Remove Connected PCs for Maintenance without powering down the PC
- Legacy Control: PS/2 Style Keyboard and PS/2 Style Mouse control all PCs and real time switch PCs without Hub
- USB Control: USB Style Keyboard and USB Style Mouse control all PCs
- Use push button or hot key control for easy computer selection.
- LED display for easy status monitoring
- Plug N Play, No Windows software driver needed for PS/2 keyboard and PS/2 mouse operation.
- Buzzer sound for switching port confirmation.
- Support auto scan function .
- High VGA resolution 1920X1440 and High bandwidth 200MHz.
- Support VGA DDC, DDC2, DDC2B.
- Supports USB bus power mode.
- Independently access USB devices and select PC port simultaneously.

Get pdf Mini Compact Two Ports USB KVM Switch User Manual

Power Supply Model XP-720 Instruction Manual

The Model XP-720 Power Supply features three solid-state DC power supplies and a 12.6VAC center tapped output. The first two DC supplies consist of one positive and one negative 1.5 to 15 volts at 1 ampere. The third has a fixed 5V at 3 amperes. All DC supplies are fully regulated. A special IC circuit keeps the output voltage within .2V when going from no load to 1 ampere. The output is fully protected from short circuits. The AC section has 6.3VAC @ 1A and a 12.6 center tapped @ 1A. This supply is ideal for use in school labs, service shops or anywhere a precise DC voltage is required.

Transformer
The transformer T1 serves two purposes. First, it reduces the 120VAC input to 17VAC to 8VAC to allow the proper voltage to enter the rectifier stages. Second, it isolates the power supply output from the 120VAC line. This prevents the user from dangerous voltage shock should the user be standing in a grounded area. AC to DC Converter

The AC to DC converter consists of diodes D1 and D3 and capacitor C5. Transformer T1 has two secondary windings which are 180 degrees out of phase. The AC output at each winding is shown in Figure 2A and 2B. Diodes are semiconductor devices that allow current to flow in one direction. The arrow in Figure 3 points to the direction that the current will flow. Only when the transformer voltage is positive will current flow through the diodes. Figure 3 shows the simplest possible rectifier circuit. This circuit is known as a half-wave rectifier. Here the diode conducts only half of the time when the AC wave is positive as shown in Figure 2C. Use of this circuit is simple but inefficient. The big gap between cycles require much more filtering to obtain a smooth DC voltage.

Get pdf Power Supply Model XP-720 Instruction Manual

MA968 Operation Manual

Function introduction:
A. On/Off Button: Power On, Play, Pause and Power Off
Power On: To turn on the unit PH the “On/Off button”for about 3 seconds and the Green LED will come on, now the unit is in the “idle” mode. Then PSthe On/Off button again to enter “play” mode. TheGreen LED will keep blinking continueously during “Play” mode.
Pause: Press the “On/Off ” buttonduring the “Play” mode, the player will enter “Pause” mode. By press the button again the player will revert back to “Play” mode. Power Off: PHthe “On/Off “buttonto switch off.The unit willautomatically power off after 30 seconds.
B. EQ Button:Effect adjustment
PS the “EQ” button during the play mode to select different musicmode, it will change from one to the next: Normal, Rock, POP, Classic, Soft, Jazz, Dbb.

Connect MP3 Player to PC:
Connect the mp3 player to the PC via the USB cable, the red and green LED is constantly on. TheGreen LED will be constantly on and when the Red LED blinks it is indicating transferring the data.
Download and Delete files: After connecting the MP3 Player to PC, click “My Computer” to find “Portable Disc” and then drag or copy the files that you want to download or upload to the required folder. This MP3 Player can also store many other files and be used as a portable memory device
Note: The EQfunction can only be judged from the sounds.
C. Volume+, Volume-: Select the songs and adjust the voice
PS the “Volume+, Volume-” in “play” mode to shift from the previous and next song PH the button to turn up or down the volume when it is in “play” mode

Get pdf MA968 Operation Manual

Power Supply System PPS 16.48-7200 - PPRD Instruction Manual

This manual is to be used by installers and technicians who are preparing the site for a new installation and installing the power system. This manual assumes that the technician has an understanding of power systems in general and understands safety procedures for working around AC and DC voltage.

The user of this document should be familiar with electronic circuitry and wiring practices and have some expertise as an electronic, power, or electromechanical technician

This chapter contains an overview of the information that is presented in this Power System Manual. This includes information on objectives, the intended audience, and the organization of this manual. In addition, this chapter also defines the conventions used to indicate warnings, cautions and noteworthy information.

This manual describes the Power System, explains how to unpack and install the system, how to perform the initial power-up and operational system check. The information presented in this document is current as of the publication date.

Get pdf Power Supply System PPS 16.48-7200 - PPRD Instruction Manual

113 Psychology Instruction Manual

Do the following FIRST for all uses.
1. If the podium touch screen panel is dark, touch anywhere on its surface to activate it.
2. At the Welcome page, press TOUCH HERE TO BEGIN.
3. Enter the passcode and touch ENTER
4. The following screen will appear
5. Press the volume up or down buttons to adjust the volume. MIC level will ONLY control the wireless microphone audio level. PROGRAM will control the volume for all other audio sources (VCR, CD, PC audio, etc). MUTE will temporarily kill the audio. The MUTE button will flash RED when it is activated. Press MUTE again to restore the audio levels to normal.
6. Touch any of the inputs along the top and side of the screen to activate that device. A control or preview screen will appear inside the current screen
7. Touch the PROJECTOR MUTE button at the bottom of the screen to temporarily “black” the video projector image. The button will flash RED when it is activated. Press it again to restore the video projector image.
8. Touch LIGHTS to bring up the light control page, below.
9. Touch any of the presets to select that lighting level. This light control panel on the wall will also control the lights. 10. There is a phone located inside the left side cabinet to contact Classroom Media Support. Call Greg Minix 5-6325(office) or 235-7023(cell), Derek Dombrowski at 5-9697 or Mike Wood at 5-9713 if you need assistance.

BUILT IN EQUIPMENT:
MICROPHONE
1. A wireless clip-on lavaliere and hand-held stick microphone are stored in the left side of the podium.
2. Flip switch to “ON”. (Top of lavaliere, bottom of hand-held)
3. For the lavaliere microphone, clip the belt pack on your belt or outside of your pocket, making sure that the antenna is hanging straight down.
4. Clip microphone at the center of your chest, about 8”-10” from your chin.
5. Adjust volume using the MICROPHONE VOLUME buttons located at the upper left side of the touch panel.
6. Press the MUTE button underneath the microphone volume buttons to mute the microphone. Press MUTE again to cancel muting. You CANNOT use both the lavaliere and hand-held microphone at the same time!

Get pdf 113 Psychology Instruction Manual

Micro-Trak BFT Manual

This manual covers Version 1.0 of the Micro-Trak BFT tracking transmitter. The MT-BFT is a single channel, crystal-controlled APRS transmitter controlled by a standard Tiny-Trak 3 encoder PIC. For more complete information on the TT3 encoder and its associated configuration software, please download the TT3 manual and configuration program from the Byonics website. The MT-BFT is only available on the North American APRS frequency, 144.390 MHZ. The unit is sold fully assembled and tested. The MT-BFT requires as much as 9 Amperes of supply current to operate at full power. Do not exceed an operating voltage of 13.5 Volts.

Programming
Programming the MT-BFT is accomplished in the same manner as programming a Tiny-Trak3. The MT-BFT is connected to the serial port of a computer port running the Byonics TT3 configuration software via a serial cable and Null-modem adaptor. The adaptor is required to switch the serial receive and transmit connectors in respect to that of a GPS receiver, which we anticipate will be the normal operating mode for your transmitter. Like most Micro-Trak and TinyTrak products, the DB-9 connector on the PC board has a 5 volt output for powering a GPS. The DB-9 is plug and play compatible with the Byonics GPS 2 and many other 5 volt powered GPS receivers.

When transmitting, the MT-BFT creates an enormous radio frequency energy filed that can wreak havoc with your computer while you are attempting programming. There are two user adjustable trimmer potentiometers on the printed circuit board. The one marked “PWR” sets the bias for the amplifiers turn-on gate. It should be noted that all of the valuable adjustment of this trimmer is in the last few degrees of rotation, and power levels other than fully rotated are best carried out with an RF power meter while transmitting into a dummy load. During programming, turn the PWR control all the way Counter-Clockwise to minimize RF fields and prevent overwhelming your computer. ( You should connect the output to a dummy load or antenna any time you carry out any programming, operation, or testing !) With the power turned down, you may power the transmitter with a nine volt battery or other low current power supply. You must apply power to the unit to program the TT3 chip. Do not program the transmitter to send position reports more than once per minute, as it could cause the device to overheat.

Get pdf Micro-Trak BFT Manual

Transio TCC-80I User’s Manual

The TCC-80I is the world’s first high-speed, isolated, self-powered converter. It is powered via the host’s RS-232 port and provides complete signal conversion between RS-232 and RS-422/485 devices. The TCC-80I coverts back and forth between RS-232’s TxD and RxD lines to either half duplex 2-wire RS-485 or the balanced signal of full duplex 4-wire RS-422/485. In addition, the TCC-80I’s built-in 15 KV ESD surge protector provides the output ports with comprehensive protection against surges and spikes. Perhaps the most important feature is the 2.5 KV isolation designed to prevent ground loop currents, reduce damage caused by data loss, and prevent damage to the communication interfaces.

The TCC-80I is also designed to provide RS-485 auto data direction control, in which the RS-485 driver is enabled automatically when the circuitry senses the TxD output from the RS-232 signal. Programming effort is not required to control the transmission direction of the half duplex RS-485 signal.

Package Checklist
• TCC-80I
• USB Power Cord
• User’s Manual

Applications
• Multipoint data acquisition
• Factory automation
• Remote serial device control
• Building security automation
• Critical industrial control

Get pdf Transio TCC-80I User’s Manual

Onyx RFG-2000 GPS Receiver User Manual

Onyx GPS receiver, RFG-2000, is a GPS mouse targeted on clients using in automotive, fleet vehicle, and electronics applications where a small and highly accurate GPS receiver is required. It provides a GPS measurement platform that performs the processor-intensive GPS tracking and processing tasks. Its 12-channel integrated receiver and one-second navigation update rate allows for continuous tracking of all visible satellites, and it can provide your exact location information soon after the power is on. With the waterproof, industrial level design and the different interfaces for laptops and PDAs, RFG-2000 can guide you in the air, land and water as a highly reliable, long-lasting Navigator. It is the most cost effective GPS-Mouse in the world.

What Is GPS
In 1974 the USA Department of Defense set about developing a Global Positioning System (GPS), a constellation of 24 satellites that Orbits 12,000 miles above the Earth. Using triangulation of signals from four of the satellites, a receiving unit on earth can pinpoint its current location to within a few meters. A GPS device receives the data, converts the longitude, latitude, and altitude (LLA) data into a location point. Position and navigation information is vital to a wide range of professional and recreational activities covering surveying, search and rescue, tracking, hiking, navigating, and so forth.

Get pdf Onyx RFG-2000 GPS Receiver User Manual

MP516A Digital MP3 Player User Manual

The driver is required for Windows XP + SP1 and Windows Media Player 10 or above version.( WMP10 for short, setup by downloading directly, not by upgrading from WMP9 )
(1) Download the songs protected by copyright to your hard drive.
(2) Plug USB cable to connect MP3 player to your PC .
Note: If it enter removable disk state after connect MP3 player to your PC, please press VOL- key switch to MTP state
(3) Open WMP10 after setup finished, and press “Sync” button as follow graph:
(4) Open the downloaded files of songs, drag them to the area of Sync (left area on the above graph) by mouse, then click “Start Sync” as follow graph. (5) Unplug the USB cable when download finished. Select the mode of playing music after power on your PC, the songs protected by copyright can work.

Computer connection application
1. Download/delete file
When you want to download or delete file or data information from the player, it is required to connect the computer and to carry out the operation via computer. Remarks: Only WIN98SE needs the installation of driver program in the disk affiliated to the player.
2. Computer connection and realization of flash disk function
1. USB transmission and MP3 file up-load
(1)If your operation systems are WinME, Win2000, Winxp or Win2003, and they need no installation of driver program. After proper connection of USB data line, a movable disk will appear in the resource manager of WINDOWS. In this case, it is available for you to use MP3 player as a common disk as shown in the picture below.

Get pdf MP516A Digital MP3 Player User Manual

BAT104-7AA-NiCd PC/104 Battery Backup Module Manual

The BAT104 works with the HE104 and V104 Vehicle Power Supplies to create a complete UPS system. For loads less than 30 watts, the BAT104-7AA-NiCd can supply backup power for up to five minutes.
Connect the BAT104 to the HE104 and V104 as follows:
- BAT104 CN3 “Common” to HE104/V104 CN3 terminal 1
- BAT104 CN3 “Battery Out” to HE104/V104 CN3 terminal 2 (and to terminal 3 for voltage monitoring)
- BAT104 CN3 “Battery In”, for external batteries
The BAT104 has a thermal fuse (F2), a current fuse (F1) for protection against overcharging, and shorts on the battery output.

A LM35 temperature sensor (Q3) provides temperature feedback for charge termination, which can be read by the Power Management unit PM104 installed on the HE104 or V104. The LM35 has an output signal of 10mV/degC. For example, at 25 degC the LM35 will output 250mV. The LM35 signal is normally connected to connector CN3 terminal 4 of the HE104 or V104.

Jumper J3 changes the supply source for the LM35 temperature sensor. When the jumper is installed between pins J3-1 and J3-2, the power source is from CN1 main input supply. When the jumper is installed between J3-2 and J3-3, the power source for the LM35 is the +5V from the PC/104 bus. Note: The Main Input source is required only if the LM35 is to be powered by it.

The BAT104 has a Mosfet transistor for isolating the batteries from the HE104 or V104 during extended power outages. The Mosfet transistor isolates the BAT104 whenever the +5V is not on the PC/104 bus and connects the BAT104 batteries whenever +5V is on the PC/104 bus. Therefore, to disconnect the BAT104 from the HE104 or V104, the PM104 just has to turn off the +5V output.

Get pdf BAT104-7AA-NiCd PC/104 Battery Backup Module Manual

747 A+ GPS Trip Recorder User’s Manual

This 747 A+ logger features an all-in-one, cost-effective portable GPS logging solution. With its on-board memory, it allows you to log your routes by ways of time/ distance/ speed. Points of interest can also be recorded by a push button. Through user friendly software utility, it shows your track on Google Earth. This recorder is small and robust, ideal to carry everywhere for applications such as route tracking, mountain climbing or fleet management.

Features
1. Dual mode for both Data record and Navigation.
2. Push button to record data manually.
3. User can record the date by setting the interval of time, distance and speed.
4. 125,000 waypoints.
5. Semi indoor.
6. AGPS available.
7. Fuzzy Auto on/off.
8. Phototagger software.
9. Support G-Mouse.

Applications
- Record your travels
- Manage business trip expense
- Concerned about one’s driving behavior
- Record Point of Interest by a push button
- Geo-photo

Get pdf 747 A+ GPS Trip Recorder User’s Manual

S.300 Professional Table Top CD Player User Manual

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance.

CAUTION: To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

Handle the power cord carefully.
Do not let foreign objects in the set
Hold the plug when unplugging the cord.
Never disassemble or modify the set in any way.
Keep the set free from moisture, water, and dust
Allow for sufficient heat dispersion when installed on a rack.
Do not obstruct the ventilation holes. (For sets with ventilation holes.)
Unplug the power cord when not using the set for long periods of time
Do not let insecticides, benzene, and thinner come in contact with the set.

Get pdf S.300 Professional Table Top CD Player User Manual

PC104-DO48H Users Manual

The PC104-DO48H is a digital output board. The ‘H’ designation indicates that these boards are capable of ‘High Drive’. High Drive TTL is capable of higher currents than standard TTL. A High Drive output is capable of supplying 15 mA and sinking 64 mA. There is no control register to set the port direction from input to output. The PC104-DO48H boards are output only. The PC104-DO48H conforms to the 50-pin connector pin specification of all CIO-DIO family of digital boards, so can be used in place of one another without changing cabling or connectors.
The board is supported by Universal Library programming library.

The board has a variety of switches and jumpers to set before installing the board in your computer. By far the simplest way to configure your board is to use the InstaCal TM program provided as part of your software package. InstaCal TM will show you all available options, how to configure the various switches and jumpers (as applicable) to match your application requirements, and will create a configuration file that your application software (and the Universal Library) will refer to so the software you use will automatically know the exact configuration of the board. Please refer to the Extended Software Installation Manual regarding the installation and operation of InstaCal TM. The following hard copy information is provided as a matter of completeness, and will allow you to set the hardware configuration of the board if you do not have immediate access to InstaCal TM and/or your computer.

Get pdf PC104-DO48H Users Manual

4 Port USB 2.0 HUB EU-HB4P User’s Manual

UHB 4200 is designed in accordance to USB specification Rev 1.1/2.0 which act as a bridge between the main computer host and the down stream USB devices. It is able to complement PC serial interface by connecting a full range of peripherals, which is very simple and flexible for the users.

There is one upstream port that connects to the PC host and there are four down steam ports connecting up to 127 USB devices in a tiered-star configuration. UHB 4200 supports both full speed (480M bps) and low speed (1.5M bps) devices which include keyboards, mice, scanner. It is also protected by automatic per-port over-current detection and recovery and the LED indicating the connection status and power source.

Features
Full compliance with USB specification Rev. 1.1.
With one up-stream port and four down-stream ports.
Connects up to 127 devices in a tiered star configuration.
Supports both full-speed (12M bps) and low-speed (1.5M bps) devices.
Select between self-powered mode and bus-powered mode automatically.
Per port over current detection/protection and power switch control.
LED for bus-power, self-power and four down-stream connection status.

Get pdf 4 Port USB 2.0 HUB EU-HB4P User’s Manual

Cowon D2 User Manual

We always strive for your complete satisfaction of our product. This manual contains user guide, cautions and other useful information about your COWON player. Please read this manual thoroughly before using, to take ful advantage of features in your COWON player.

The D2 can recognize up to 500 folders and about 5,000 files.
- If the COWON drive does not show up under Computer or Windows Explorer, Disconnect and re-connect the USB cable and repeat the previous procedure again [For windows 98)
- If remove the USB connection within the windows software while the USB cable is connected to a PC, the player is being charged through the USB.
- USB charging does not work if the unit is connected to a USB Hub. It must be connected directly to a USB port on a computer.
- If using Windows 98, 98 SE, the “Safe to Remove Hardware” window may no t appear. If this happens, Exit JetShel (or confirm that the file transfer status window has been closed), and then disconnect the USB cable from the PC.
- If a folowing message appears, please ignore the message.

Get pdf Cowon D2 User Manual

LevelOne 10/100M 32bit Fast Ethernet PC card User’s Manual

This user’s manual describes how to install and operate your LevelOne 10/100Mbps 32bit Fast Ethernet PC Card. Please read this manual before you install the product.
This manual includes the following topics:
Product description, features and specifications.
Hardware installation procedure.
Software installation procedure.
Trouble shooting procedures

This high-speed LevelOne 10/100Mbps 32bit Fast Ethernet PC Card complies with the CardBus standard and uses a female RJ-45 adapter to connect to the network. The LevelOne 10/100Mbps 32bit Fast Ethernet PC Card is switchless and software configurable. For convenience and ease of operation, LAN (RJ-45) connector is built onto the card.

Features
• Extended PC Card design that integrates RJ-45 connector onto the PC card
• No moving parts to break and no media coupler to lose
• Complies with IEEE 802.3u 100Base-TX and IEEE 802.3 10Base-T
• Complies to PCMCIA 1995 PC Card standard
• PC Card standard 68-pin 32-bit PCMCIA interface
• Support all popular Network Operating Systems
• Supports hot swap card insertion and removal
• 10/100Mbps auto-sensing
• Full/half-duplex auto-negotiation for both 10Base-T and 100Base-TX
• Switchless configuration setting

Get pdf LevelOne 10/100M 32bit Fast Ethernet PC card User’s Manual

Bushnell ImageView 2 User Manual

Congratulations on your purchase of a Bushnell® ImageView® binocular. Before using the product, please read the instructions contained in this manual and take time to familiarize yourself with the different parts and features of the product.

CAMERA OPERATION INSTRUCTIONS
BUTTON DESCRIPTIONS
The MODE button has three functions:
1. Power on: Press and hold the button until the camera turns on. When the camera is connected to a PC via the USB cable provided, the camera will power on automatically.
2. Power off: While the camera is on, press and hold the button until the camera turns off. If the camera has not been used or if a button has not been pressed for over 2 minutes, the camera will automatically power off to save battery life. If the camera is connected via USB, it will not power off except when the PC power is off.
3. Mode change: press the button rapidly to change modes.
B. The SNAP button has two functions:
1. Take a picture: press this button to take a picture when the camera is on. (But not in the PC mode or mode change.)
2. Select: in “Mode Change” press this button to confirm the function.

Get pdf Bushnell ImageView 2 User Manual

M3LR RTD Transmitter Instruction Manual

This manual describes the necessary points of caution when you use this product, including installation, connection and basic maintenance procedures. The M3LR with Option /A is programmable using the PC configurator software. For detailed information on the PC configuration, refer to the M3CON instruction manual.

HOW TO OPEN THE COVER WHEN SETTING DIP SW
Hold at the top and bottom of the unit as shown below and slide the housing cover gently to open until it hits the latching inside the unit. INSTRUCTION MANUAL MODEL M3LR RTD TRANSMITTER (field- and PC-configurable) Specification Label (side) Body SW Setting Label
• Housing Cover Fully Opened
Caution: Handle the cover carefully to protect internal components from damage.
DO NOT pull beyond where the housing cover is latched. The plastic housing may be damaged.

HOW TO SEPARATE THE TERMINAL BLOCKS
When you need to separate the terminal blocks from the transmitter body for wiring, insert a minus driver between the terminal block and the housing body, pull up the driver and pull out the terminal block.

Get pdf M3LR RTD Transmitter Instruction Manual

BVS VC-1D SDI V-Chip Encoder Manual

The BVS SDI V-Chip Encoder can be controlled in three different ways:
1) Control through the card edge rotary switch (limited functionality).
2) Control through the optional control panel.
3) Control through a PC and VC-1D Windows software (supplied), via RS232 or RS485.
Three GPI functions are also available when the VC-1D is operated with a control panel or a PC (see “VC-1D Control Cabling Options & GPI’s” page).

There are three LED’s on the front card edge, accessible by removing the front panel. The left hand red LED indicates DC power. The left hand green LED indicates the VC-1D has locked to Program In. The right hand green LED (flashing) indicates normal processor operation.

Jumper JP1 controls the equalizer in the input receiver IC (GS7005 device located near the input BNC). For long cable lengths (greater than 30 ft.), activate the equalizer by moving the jumper to pins 2 and 3 (jumper on the two pins closer to the front of the board). Otherwise, leave the jumper on pins 1 and 2 (jumper on the two pins closer to the back of the board).

The PC boards are installed in the frame from the rear. To remove a board, unscrew the four bolts at the corners of the connector plate. Pull on the BNC connectors, using a termination for grip. To reinstall, slide the board into the card guides and push until the connector plate is flush with the rear panel.

Get pdf BVS VC-1D SDI V-Chip Encoder Manual

i.Trek M5 Personal Navigation System User Manual

Bluetooth GPS Receiver, i.Trek M5, a global positioning system receiver with Bluetooth wireless technology. i.Trek M5 is well suited to system integrations including PDA, smart phone, Tablet PC and Notebook PC with Bluetooth capability. It can be used for a wide variety of applications such as in-car navigation, geocaching, personal positioning and sporting. With the dimension of 69.6(L) x 47.3(W) x 19.2(H) mm and weight only 72g (w/ battery), i.Trek M5 is an ideal solution to carry along everywhere.

i.Trek M5’s rechargeable battery can save satellite information such as the status of the satellite signal, most recent location and the data and time of its last use. The low-power design has an operation time up to 30 hours and brings you the most convenient and longest usage of its kind. With the lead-free production process (starting Jan. 1, 2006), i.Trek M5 is the most environmentally friendly wireless GPS receiver in the market. i.Trek M5 has uniques features others don’t have. With the patent pending Smart Power Save Mechanism and Auto On/Off features, i.Trek M5-Blue consumes 65% less power than other wireless GPS receivers, and can extend the operating time to more than 30 hours.

i.Trek M5 supports fuzzy auto on/off. It can automatically enter the sleeping mode after turning off the Bluetooth connectivity, thus further extending the battery life of the deivce. With fuzzy auto on/off, if the connection between your device and i.Trek M5 is successful, i.Trek M5 will wake up itself and the blue Bluetooth LED will be quickly blinking again (every 1 sec) and the orange GPS LED will also be on.

Get pdf i.Trek M5 Personal Navigation System User Manual

HS-16-CNR Manual

This manual should be used with the Neuralynx Electrode Interface Board 16 channel (EIB-16) manual. The Neuralynx Headstage 16 (HS-16-CNR) Amplifier is the active electronic part of the Electrode Interface Board / Headstage / Tether system. It provides 16 channels of Unity Gain amplification (buffering). It also provides connections for the electrode inputs to the EIB-16 and an output connector for a 20-conductor tether.

The Headstage Amplifier size is approximately 20 mm high by 10 mm wide. Weighing only 600mg, the HS-16-CNR is a good choice for small animals. One connector on the bottom of the board is used to connect the Headstage Amplifier to the Neuralynx Electrode Interface Board. Low noise, low power, low input bias current Op amps have been used on this device instead of the traditional “Source Follower FET circuit” used in the traditional headstage amplifier design in order to:
• obtain exact unity gain which greatly improves Common Mode Rejection Ratio (CMRR)
• performance for the entire recording system for artifact and other common mode noise signal rejection;
• lower output impedance to reduce noise susceptibility of the tether and other signal cabling;
• provide integral antistatic protection on each input channel;
• insure low input bias current levels; and
• eliminate signal distortion.

Because an Op amp is used for the unity gain buffer amplifiers, special care and attention must be given to the power supply design and power application and removal sequencing. The input protection circuitry will lower the input impedance if the input voltage exceeds power supply voltage. This can occur if the input voltage exceeds the power supply voltage or by the loss of power supply voltage. The Neuralynx EEG/Reference Panel contains power supplies which properly sequence power supply voltage and monitor headstage currents.

Get pdf HS-16-CNR Manual

Digital Video Camera Manager E-Manual

The Pocket DV is equipped with 16 MB (128Mbits). It offers digital camcorder, digital still camera, voice annotation , and Video Conferencing functions. It is able to take up to 450 VGA pictures and up to 2000 QVGA pictures. In addition, your camera supports AVI Movie (QVGA) and provides audio & video synchronized function. It allows up to 200 seconds audio & video recording and is able to achieve around 30 minutes voice annotation.

Installing batteries
Your camera is powered by 2 AA batteries or by a PC via a USB cable. Please be aware that when batteries are out of power or are removed, all stored pictures will be erased. Therefore, please upload images, audio or video files to PC as soon as possible. (Battery Capacity: continuous AV recording for 2 hours, standby for 7 days. )

Get pdf Digital Video Camera Manager E-Manual

HR-1002 Mini Power Wireless Module User’s Manual

The HR-1002 is direct-current power supply, the voltage is +4.5V to 5.5V, the typical voltage is +5V, the electric current is bigger than 150mA.The user need to order if they use 3V Power supply.

The power source can share a power supply with other equipment, but must choose the power source with good ripple coefficient, and we suggest don’t use the switching power supply, if must use, please note mutual disturbance between the turn-on frequency of the switching power supply and the broadcasting station frequency. In order to prevent the breakdown of static electricity or the strong electric, when the system equipment been used, then needs to earth it reliably, at the same time must isolate the city electricity completely.

HR-1002 supply TTL, RS232 and RS485 interface, user can choose interface freely before shipped, the user interface under the standard disposition, which is plastic plug, the gap faces below , from left to right, is 1,2,3,4,5.

Using testing software to check and set parameters
A. HR-1002 connect computer, link with power, choose needed interface.
B. Radio test, when testing radio (software can indicate successful test ), then single data can be read or set
C. When you choose your needed data, need to set, after finished setting, continue to read, and check the data of module whether you need.

Get pdf HR-1002 Mini Power Wireless Module User’s Manual

USB 2.0 Multiple Flash Card Reader User’s Manual

PRO 9 is a multi-function, read and write device for today’s most popular flash memory card formats. It brings you the benefit of ultra high speed data transferring between your desktop PC and your personal electronic devices, such as Digital Cameras, MP3 Players, PDAs, Voice Recorders, Pocket PCs and many other electronic devices that adopt the flash media formats supported by this product.

Utilizing the most widely equipped USB (Universal Serial Bus) interface in PCs, PRO 9 is based on latest USB 2.0 technology with the capability of of transferring data up to 480 Mb/sec via USB 2.0 connection. Backward compatibility design of PRO 9 also allows you to connect to PCs with USB 1.1 interface, operating at USB 1.1 speed.

Convenient feature like Plug-and-Play makes it easy to setup PRO 9 on your computer. On Operating Systems like Windows ME and Windows XP, PRO 9 does not require prior installation of software driver at all. With the versatile design, PRO 9 can be used externally as a portable unit or mounted internally to a standard 3.5″ drive bay of your PC.

Get pdf USB 2.0 Multiple Flash Card Reader User’s Manual

Horizon XL Instruction Manual

Select the weigh mode (lock-on),record mode (manual record), algorithm mode (10lb start or 20lb start for livestock) and load bar settings from the setup menu. Turn auto zero on. BAR ERROR displays when no load bars are detected. In manual record, when the animal stands on the platform,scan the EID tag or enter the VID number. Use the left or right direction keys to select VID,TAG and codes 1 to 3 if you wish to enter data in these fields. When the weight is locked on and all data is entered, press the record key.

In auto record,when the animal stands on the platform,scan the EID tag. Release the animal after the weight has locked on and the scale will automatically record the data as the animal leaves the platform. If data is entered using the keypad while in auto record, i.e entering a VID,TAG,or codes,the scale resorts to manual record for that animal and the record key needs to be pressed.
The RECALL key recalls the last weight.
The REWEIGH key reweighs the animal without changing the EID and other data.
The CLEAR key clears all data from the screen. The STATS key provides statistics for a session. Press the STATS key then the right direction key to view data. To start a new session select the CLEAR option at the end of the stats data. The indicator can record data when no loadbars are connected.

Get pdf Horizon XL Instruction Manual

DynaMO 2300U2 On-line User’s Manual

The DynaMO is a high-performance, high-reliability Magneto Optical (MO) disk drive unit that uses 2.3GB/1.3 GB (GIGAMO) disks and any ISO standard 128, 230, 540, and 640 MB 3.5″ MO disk. Using Direct Over Write (DOW) MO disks you can improve the drive’s performance. DOW disks, however, are only available in 540 and 640 MB capacity. Before using your DynaMO, make sure that you have all the components printed on the packaging box. If any components are missing, please contact your reseller.

Installing your DynaMO is fast and easy. Please refer to the following instructions to set up your
DynaMO and install the appropriate software:
1. Install the DynaMO software for your operating system. (Refer to Chapter 3.1 for details.)
2. Connect the DynaMO drive to your PC. (Refer to Chapter 3.1 for details.)
3. Using your MO drive is as easy as using a floppy disk drive. (Refer to Chapter 3 for details about using the MO drive.)
4. Formatting MO disks. (Refer to Chapter 3.9 for details about the MO disk format.)

Get pdf DynaMO 2300U2 On-line User’s Manual

G-RAID mini Installation Guide

(G-Tech)! G-RAID mini is an ultra-portable, bus powered FireWire storage solution specifically designed to support professional content creation applications. G-RAID mini will support Multi-stream video playback with real-time effects and audio while editing on a laptop in the field. G-RAID mini incorporates (2) 2.5” high-performance, shock resistant hard drives and a RAID 0 controller in a sleek actively cooled enclosure. G-RAID mini offers superior performance and reliability for demanding content creation applications.

The G-RAID mini disk array contains (2) 2.5” shock-resistant drives, however the system is susceptible to damage due to excessive physical shock. Place the unit in a vented area away from moisture or liquids. Please handle the unit with care. Do not open the case. Doing so will void the warranty. If the product is returned with damage caused by improper handling, the warranty will be void and liability will rest with the user.

The G-RAID mini can be connected to your system via FireWire 400, FireWire 800 or USB.
One of the coolest features of the G-RAID mini is that it can be operated without a power supply when connected via the FireWire 400 or 800 port. This “bus powered” feature enables mobile operation without the need for an A/C power supply. While it is possible to daisy-chain multiple G-RAID mini units via FireWire, only the first G-RAID mini can be bus powered. Any additional units must be powered by the included AC adapter. Failure to do so may cause random unmounting of the G-RAID mini and data loss.

Get pdf G-RAID mini Installation Guide

LPS 505N Programmable DC Power Supply User’s Manual

Motech LPS 505N is a programmable DC power supply with three (3) outputs that channel 1 and channel 2 are linear power supply and channel 3 is a switching mode power supply. LPS 505N comes with 12 bits resolution. The maximum total output power is 222 watts with both channel 1 and channel 2 providing 96 watts each (0 32V/3A) and channel 3 providing 30 watts (0 15V/5A). For the channel 3, the maximum output power is 30 watts. When the output voltage is set to 6 volts or less, the output current can be up to 5A. If the output voltage is set above 6 volts then the maximum output current depends on the output voltage setting and the maximum output power of 30 watts.

This is a unique feature and it differs from other traditional power supplies. For the channel 1 and channel 2, they can be put in parallel mode if the output current is required to drive more than 3A. Also, they can be put in serial mode if the output voltage is required to provide more than 32V. Tracking function is a convenient feature that is also provided to meet general applications. The LPS 505N has a rotary and numeric keypads for user to manipulate this electronic instrument easily. The LPS 505N provides a memory space enough to store 100 configurations that can be recalled later after saving.

This feature offers an easy way to restore the application setting. There is a build-in timer (1 sec100 hrs) that can be used to control when to switch off the output power. This feature provides an extra safety for burning room and electroplating applications. The LPS 505N also provides over voltage protection (OVP) and over current protection (OCP) features used to keep the output voltage and current within the safety level preventing the target from the damage caused by the over current. The key lock feature is added to avoid accidentally wrong setting to the LPS 505N. When the input power and the load change, the LPS 505N provides a stable output with the load and line regulation within 0.01% and the transient time less than 50 us. When in remote mode, the LPS 505N may output a new setting in 50 ms after receive a command. This quick response time may increase the throughput on the mass production lines.

Get pdf LPS 505N Programmable DC Power Supply User’s Manual

BS-6000 TCP/IP Remote Communication Station User’s Manual

The BS-6000 is able to upload data collected from guard tour readers over the TCP/IP network (either intranet or Internet) by connecting to an Ethernet cable. Prior to deployment, the BS-6000 unit needs to be connected to the PC and be setup using the provided software. The provided software also acts as the server software, transferring data to a stand-along or web-based software system.

First-Time Usage
Before download the data from reader, we recommend you to initialize the station to make sure the station does not have any useless records.

Remote data upload
Please make sure BS-6000 has been connected with the intranet or Internet. Once it has data that needs to be uploaded, the BS-6000 will automatically attempt to connect and upload to the server. This will occur after communication with a reader is complete, and also when the BS-6000 is first powered up. If it does not succeed on the first attempt, it will try again once every 30 seconds for the next 90 seconds. Afterwards, it will wait for 3 minutes, and start trying again every 30 seconds for another 90 seconds. The cycle continues until all unuploaded data has been uploaded. The red LED next to the green LED will then turn off.
Local data upload
BS-6000 is capable of uploading the stored data to the PC directly.
- Connect the unit to the PC using the USB cable provided.
- Start the patrol management software, and select the appropriate communication method.
- Open the “connect” screen in the patrol management software, which will automatically collect data from the BS-6000.

Get pdf BS-6000 TCP/IP Remote Communication Station User’s Manual

Personal Rover Project Cerebellum Board User’s Manual

The Cerebellum is intended as the main controller board for the Personal Rover. Built around PIC microcontroller, it provides the following functionality:
• Controls up to 8 hobby servos
• Open loop control of 2 DC motors
• Read from up to 8 analog input lines at 8-bit resolution
• 4 digital I/O lines
• 2 RS232 serial communications ports
• I2C bus master for up to 8 motor controller daughterboards
• ASCII-based serial user interface
• User programmable over PC parallel port

Power
The Cerebellum has a voltage regulator that provides a stable 5V to its logic systems and integrated circuits. This means that more than 5V has to be supplied to the primary power input to provide for the dropout voltage of the regulator. Both the H-bridge and the hobby servos can be powered through either the main power supply or their own independent power supplies. This is selected using jumpers on JP1 and JP2 respectively. The following diagrams and tables show the pin numbering and appropriate jumper connections for JP1, JP2, PWR1, PWR2 and PWR3.

Get pdf Personal Rover Project Cerebellum Board User’s Manual

PD2500 Series User’s Manual

Stand-alone Pole Display with a mount plate and small base size with a rock power ON/OFF switch on base (PD2500). Rear mount Pole Display for Posiflex Jiva XL series touch terminals (PD2501) Euro dollar sign supported in code page 858 Various command emulation modes selectable by DIP switch Total height 556mm above mounting plate with a strong, stable pole 0° to 45° tilt in four steps and 300° swivel for best viewing effect Cabinet color choices: ivory, charcoal.

INSTALLATION
1. For all PD2500 & PD2501: Please set DIP SW on back of the display unit of PD2500/PD2501 according to the appropriate emulation mode and the instructions in next section.
2. For all PD2500: Mount the pole display stand plate to the metal plate of base cabinet with screws and mount the pole display stand plate to the bottom of your Posiflex cash drawer CR3100/CR3200 series as in the drawing or on the cashier’s dash. Connect the pass through device to 9 pin male connector at side of PD2500 base if required. Stand plate Bottom view of cash drawer Base cabinet
3. For PD2500 with power adaptor only: Use the attached interface cable 20863035900 (CCBLA-359) to connect the 9 pin female connector at side of the base of PD2500 to the 9 pin male connector for serial port such as COM1 of the host PC. Check the specification of power adapter on its nameplate. Check the power switch on base of PD2500 should be turned off. Insert the power adaptor into the right power outlet. Insert the output plug to the jack above the 9 pin D connector at one side of PD2500 base.
4. For PC powered PD2500 only: Open the case of a PC per its instruction manual. Take the attached assembly coded 20867014100 (or known as CCBLA-141) and install the I/O plate to one of the I/O windows in PC. Then connect it to one of the power connectors from CCBLA - 141 4 pin power connector from switching power supply unit.

Get pdf PD2500 Series User’s Manual

IEEE802.11b/g High Power Wireless AP/Bridge User Manual

PheeNet WAP-654GP covers a large operating distance, providing a 802.11b/g High Power WLAN which enables users to access the Internet or an organization’s network. At up to five times the speed of previous wireless devices, you can work faster and more efficiently, increasing productivity. With the PheeNet WAP-654GP, bandwidth-intensive applications like graphics or multimedia will benefit significantly because large files are able to move across the network quickly. PheeNet WAP-654GP is suitable for manufacturing plants, industrial sites, military bases, universities, hotels, airports and golf courses. PheeNet WAP-654GP simultaneous AP and Bridge operations for backhaul applications. Configurable in four different modes (access point, bridge, multi-point bridge, and wireless client),

PheeNet WAP-654GP offers 128-bit encryption, WPA and 802.1X authentication when used with a RADIUS server, MAC address access control, and additional security features. PheeNet WAP-654GP are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks.

PheeNet WAP-654GP wireless products will allow you to access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking brings.A Wireless Local Area Network (WLAN) is a computer network that transmits and receives data with radio signals instead of wires. WLANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities.

Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. People use WLAN technology for many different purposes:
Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can significantly improve worker efficiency.
Low Implementation Costs - WLANs are easy to set up, manage, change and relocate. Networks that frequently change can benefit from WLANs ease of implementation. WLANs can operate in locations where installation of wiring may be impractical.
Installation and Network Expansion - Installing a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Wireless technology allows the network to go where wires cannot go - even outside the home or office.
Inexpensive Solution - Wireless network devices are as competitively priced as conventional Ethernet network devices. We can save money by providing multi-functionality, configurable in one of three different modes.
Scalability - WLANs can be configured in a variety of ways to meet the needs of specific applications and installations. Configurations are easily changed and range from Peer-to-Peer networks suitable for a small number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed.

Get pdf IEEE802.11b/g High Power Wireless AP/Bridge User Manual

Alpha-102B/Alpha-104B 2/4 port PS2 KVM Switch All mice w/ Audio User’s Manual

Terraview KVM switch with Audio can save your MONEY, TIME, SPACE, EQUIPMENT and POWER. Controlling multiple PCs from One Keyboard, Mouse, VGA Monitor and Audio (Microphone & Speaker). It has complete keyboard and mouse emulation for simultaneous PCs boot-up process. Intelligent PS2 KVM switch can handle congestion control during booting all of PCs and is loaded with features such as hot-key, push button, auto scan control and 400MHz VGA band width for high resolution 2048 X 1536. Windows O.S. only supports 2D/3D mouse software driver.

Some mouse makers design extra user define keys (For instance : Microsoft Intellimouse explorer, Intellimouse Optical ) for popping up a frequent used application software such as WORD, EXCEL,…etc.. There are many user define key mice exist in the market like 4 key plus one wheel, 4 key plus two wheels , 5 key plus one wheel, ….etc. The extra user define key mouse need be installed with their own software or proprietary driver. Most of KVM switches in the market just can process legend mouse or standard 2D/3D mouse or very few specific mice. For future new generation mouse, they are hardly to compatible to them and cause user inconvenience. Intelligent PS2 KVM switch supplies you high compatibility with your user’s define key mouse

Intelligent PS2 KVM switch with Audio can be very smart to detect not only 2D/3D mice, but also some proprietary type 4D/5D mice ( like Mouse accompanied with user define keys ) and even the future new generation mouse which supported more user’s define keys for special application

For non-standard PS2 3D/4D/5D mouse (say, proprietary mouse) or not fully Microsoft mouse compatible is unable to work with this KVM switch, please contact your distributor or try the flash ROM type KVM switch if its updated firmware can solve the incompatible problem.

Get pdf Alpha-102B/Alpha-104B 2/4 port PS2 KVM Switch All mice w/ Audio User’s Manual

USB Telephone Speech Recorder User Manual

The USB Telephone Speech Recorder is a multi-purpose desktop and telephonic speech recording and playback device. It allows the User to record all desktop conversations and / or telephonic conversations from any analogue or digital desk telephone to a PC, using a standard USB interface. It employs sophisticated galvanic isolation circuitry to eliminate noise problems commonly associated with PBX telephone speech recordings. This allows the Recorder to be used with any telephone system. The major advantage over other similar products is the plug- and-play capability. There is no need for any additional software drivers.

The Recorder is a small device that can be attached to the back of the telephone and discretely interfaces to the telephone handset curly cord. Furthermore, the Recorder is USB bus powered, thus eliminating the need for any external power supply. This removes the wiring mess and clutter commonly associated with such products.

Benefits:
• A multi-purpose telephonic and desktop speech recording and playback device.
• Provides high quality digital recordings independent of the telephone instrument or technology used.
• Provides recording solutions on systems where other products fail.
• Provides a unique handset playback feature.
• Fully USB 1.1 specification compliant.
• Plug-and-play. No soundcards or software drivers are required.
• Works on any PC using Windows 2000 or Windows XP operating systems with a USB port.
• No need for external power supplies. Eliminates the wiring mess and clutter commonly associated with such products.

Get pdf USB Telephone Speech Recorder User Manual

Autoranging Datalogging Insulation Tester (Megohmmeter) User’s Manual

The 380366 measures insulation resistance to 4000MΩ and includes Continuity and Voltage tests. The built-in datalogger remotely stores approx. 16,000 readings for later transfer to a PC. The tester can also take and record readings to a PC in real time. This professional tester, with proper care, will provide years of safe reliable service.

Connecting Test Leads
For all functions (Megohmmeter, Resistance, Continuity and AC Voltage), connect the red test lead to the HI terminal and the black lead to the LO terminal.

Test Lead Check
1. Connect the red test lead to the HI input terminal; black lead to the LO terminal.
2. Set the rotary switch to the resistance/ continuity position (Ω)
3. Touch the test lead tips together. Resistance should be less than 1Ω and the audio tone should sound.
4. With the leads not touching, the display should read “-OL-“. (over range).
5. If any readings are displayed other than the readings just described, the test leads should be considered faulty and must be replaced before using the meter. Failure to do so could result in damage to equipment and electrical shock.

Insulation Resistance Measurements (Megohmmeter Tests)
1. Connect the red test lead to the HI input terminal; black lead to the LO terminal.
2. Set the rotary switch to the desired function.
3. Connect the tips of the test leads to the equipment under test.
4. Press and hold down the red TEST button. Release the test button to stop the test. The meter will then hold the resistance reading. This is indicated by the H icon in the upper left corner of the display.
5. To clear the display, press the LOCK/HOLD button twice. Note that the charge stored on the device under test will be automatically discharged when the testing process is finished 3-Minute Test

For hands-free operation, use the Test Lock feature.
1. Connect the red test lead to the HI input terminal; black lead to the LO terminal
2. Set the rotary switch to the desired function.
3. Connect the tips of the test leads to the equipment under test.
4. Press the LOCK button. The LOCK icon will be displayed. Press the red TEST button. A 3-minute continuous test will begin. The red TEST button can be pressed at any time to end the test. If the TEST button is not pressed the meter automatically stops the test after 3 minutes. The meter will then hold the resistance reading. This is indicated by the H icon in the upper left corner of the display.
5. To clear the display, press the LOCK/HOLD button twice.

Get pdf Autoranging Datalogging Insulation Tester (Megohmmeter) User’s Manual

UDS-1000 USB 2.0 Docking Station User’s Manual

The USB 2.0 Docking Station is an intelligent expansion module, which connects to a PC or notebook via Universal Serial Bus (USB) port and VGA output port, providing one high-speed RS-232 serial port, one printer port, one PS/2 keyboard & mouse, 3 downstream USB 2.0 ports and one Ethernet access and one extending VGA display output port. The USB 2.0 Docking Station features easy connectivity for traditional serial devices, keyboard, mouse and other USB devices and provides up to 480Mbps USB 2.0 High Speed capability. Also add one extra Ethernet port and extra VGA display to your PC or notebook in seconds.

Features
Instantly converts notebook into networked desktop workstation
Adds a Parallel, Serial, 10/100M Ethernet LAN, PS/2 Keyboard/Mouse and three USB 2.0 ports to your laptop or desktop system
Connect your desktop monitor to your laptop with VGA pass-through
Use USB bus-powered or self-powered with included power adapter
Backward compatible with USB 1.1 devices
Easy installation and compatible with Windows 98/98SE/ME/2000/XP

Get pdf UDS-1000 USB 2.0 Docking Station User’s Manual

HDMI 4×2 Matrix Operation Manual

Cypress CHMX-42 is a high performance HDMI Matrix with remote control. It offers you maximum convenience in HDMI signal distribution when you have multiple HDMI sources and displays to connect together. Each of the four HDMI sources can be directed to any one of the two outputs, so two displays can show 2 identical or 2 different sources at the same time. CHMX-42 provides a maximum of 8 possible connection scenarios between sources and displays.

When HDMI signal progresses through CHMX-42, it is re-timed, level compensated, phase error corrected, and data jitter eliminated, so the output is a regenerated brand new HDMI signal that can run for another 25 meters and can be cascaded.
1. HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant.
2. HDMI input is compensated, clock / phase adjusted, and jitter eliminated so the output is a well tuned standard HDMI signal.
3. Input source LED indicators on each output select.
4. Ideal for home theater integration, conference room and retail stores.
5. Compatible with all HDMI sources and displays.
6. Supports high resolution input/output: PC: VGA, SVGA, XGA, SXGA and UXGA (1600X1200) & HDTV: 480i, 576i, 480p, 576p, 1080i, and 1080p
7. RS-232 control.
8. IR remote control.

Get pdf HDMI 4×2 Matrix Operation Manual

Using CMOS Circuitry in Industrial Control

Industrial computers originally used LSTTL circuits. Because many PC components are used in laptop computers, IC manufacturers are exclusively using CMOS technology. Both TTL and CMOS have failure mechanisms, but they are different. This section describes some of the common failures which are common to all manufacturers of CMOS equipment. However, much of the information has been put in the context of the Micro PC.

Octagon has developed a reliable database of customer-induced, field failures. The average MTBF of Micro PC cards exceeds 11 years, yet there are failures. Most failures have been identified as customer-induced, but there is a small percentage that cannot be identified. As expected, virtually all the failures occur when bringing up the first system. On subsequent systems, the failure rate drops dramatically.

- Approximately 20% of the returned cards are problem-free. These cards, typically, have the wrong jumper settings or the customer has problems with the software. This causes frustration for the customer and incurs a testing charge from Octagon.
- Of the remaining 80% of the cards, 90% of these cards fail due to customer misuse and accident. Customers often cannot pinpoint the cause of the misuse.
- Therefore, 72% of the returned cards are damaged through some type of misuse. Of the remaining 8%, Octagon is unable to determine the cause of the failure and repairs these cards at no charge if they are under warranty.

Get pdf Using CMOS Circuitry in Industrial Control

1.5″ Digital Ornament User’s Manual

This Digital Ornament is a stand-alone device that is designed to transfer and store images from a PC and then display the images. Using the application software supplied with this device, you can organize, edit, enhance and download the image in your PC to this device using a USB cable. The 1.5” Digital Ornament enables you to view 59 digital photos. Once you store the images into the Digital Frame, there’s no need to use a computer. You can enjoy your photos anytime and anywhere. It’s very convenient and quick. Battery operated, fully portable, Built-in Clock, USB connection for easy downloads.

Replacing the Batteries:
This pedometer uses two AAA size alkaline batteries (not included). Follow these steps to install batteries:
1. Press down on the back cover and slide the cover down and off the unit.
2. Remove the exhausted cells and insert two AAA size batteries as indicated by the polarity.
4. Replace the back cover.
Note: If the sound weakens, distorts, or the display dims, replace the batteries.

Get pdf 1.5″ Digital Ornament User’s Manual

HUXSCOPE-UE Fiber Optic Microscope/Inspector User Manual

HUXSCOPE-UE TM is very usefully device to inspect ferrule in field. You can use it to inspect the connector installed inside hardware device and capture the image to your computer..
AVAIABLE APPLICATIONS
▪ Fiber Optic System / Sub-system with Fiber Networks
▪ Fiber Optic Module included Transceivers
▪ Test Equipment and Distribution Patch Panels
▪ Fiber Optic Components like Attenuators, Inside Adaptors

PRODUCT SETUP
1. Install first Hardware/Driver and then Software (refer to installation manual enclosed).
2. Connect Handset to Computer USB and Control the display size.
3. Cange Tip : The handset basically was assembled by SC/FC/PC Female Tip. If you want to change Tip to others, it could be changed by screw easily. Please keep clean lens in Handset when removing and changing the Tip. The lens is important to get clean images. So we recommend you should be careful.
4. Insert the tip into adaptor or female side of fiber optic devices. You can feel reaching edge of the adaptor. To get clean images, you have to rotate 360° FOCUS.
5. Capture Image to the computer.

Get pdf HUXSCOPE-UE Fiber Optic Microscope/Inspector User Manual

Electronic Gadgets Manuals

Archive

Labels