Free Gadget Manuals: 03/12/09

C-100 D-370 Digital Camera Operation Manual

CHECKING
• When a SmartMedia card is inserted, you can download the images stored on the card.To download images from the internal memory, remove the SmartMedia card.
• Turn the PC on and check that Windows is running.
• Quit all applications that may be running.
• Olympus recommends the use of an optional AC adapter. If you are using batteries and the power runs out while you are accessing the SmartMedia card in the camera from the PC, the camera may stop functioning mid-operation and files (image data) may be lost.
• If you are not using an AC adapter, check the battery level to make sure that there is enough power left.
• Do not connect or disconnect the AC adapter while the camera is connected to the PC.

• Olympus cannot guarantee operation on a PC that has been upgraded from Windows 95 to Windows 98 even if it has a USB connector.
• If the camera is connected to the PC with the batteries still loaded in the camera, connecting and disconnecting the AC adapter may lead to damage or loss of the image data on the SmartMedia card or computer system lockup.
• Use the USB cable to connect the PC and the camera. We cannot guarantee operation if you connect the PC and the camera by HUB adapter (for connecting several peripheral devices).
• Olympus cannot guarantee operation on a PC whose operating system is not pre-installed at the time it leaves the factory or a PC assembled by the user, as the operating environment of such PCs is not guaranteed by the manufacturer.

Get pdf C-100 D-370 Digital Camera Operation Manual

X300 Car PC Instruction Manual

Thanks for your purchase of the X300 car PC. Please read this instruction carefully before using the product and take care of it for later use. The X300 will provide your car with audio and video of excellent quality, wireless internet access, streaming video, hands-free calling, voice recognition and GPS navigation.

Product Highlights
* Navigation Capable (SiRF STARMI GPS Receiver Built-in)
* Multimedia Player (MP3/CD/DVD/WMA/etc)
* Wireless Mobile Internet
* 45 Degree Visual Angle Adjustment
* Streaming In-CarTVvia Internet
* Built-in Slim Combo Drive (DVD-ROM + CDRW)
* Hands-Free Calling and SMS Capable
* 7V-24V Wide-Range Voltage Input
* Up to 200GB of Storage
* Video Conference
* Mobile Gaming
* Mobile Office (On-the-Go Productivity)
* Mobile Connectivity via Bluetooth/WiFi/GSM (Optional)
* Receiving/Sending of E-mail and E-Faxes
* Windows XP/VISTA or Linux Operating System
* Car Diagnostics (OBD-II) Capable
* Up to 2.0GHz Intel Pentium M
* 4X45W Digital Amplifier
* Intelligent Automotive Power Supply
* Rear-view AutoSwitch on Reverse
* Independently Play DVD/MP3/CD via SANYO CDC 10 Disc
* Touch-Screen OSD Radio Menu
* Built-in Independent Play AM/FM Stereo
* Standard Double DIN Stereo Size

Get pdf X300 Car PC Instruction Manualc

FM3101 GSM / GPS Terminal Manual

FM3101 is a terminal with GSM and GPS connectivity, which is able to get device coordinates and transfer them via GSM network. This device is perfectly suitable for applications where location acquirement of remote objects is needed. It is important to mention that FM3101 has additional inputs and outputs, which let you control and monitor other devices on remote objects. There is integrated 1-Wire® I/O (for Dallas digital thermometer or I-Button reader). Also it has RS232 port (possibility to connect any external device for example barcode reader, RFID reader etc.) Apart from that, the device is fully programmable, so you can load a special Java™ IMlet and perfectly adapt it for your needs.

FM3101 has rechargeable battery inside and special controller for power management. Because of this new feature, GPS/GSM unit can operate for some time without external power supply. Special power saving algorithm can be implemented in Java™ IMlet and working time can be expanded up to 3-5 times.

Main Features
Track your remote objects (trucks, cars, ships etc) quickly and easily
The device supports the following GSM bearers:
• EDGE class 6 (up to 177,4 kbps).
• GPRS class 10 (up to 85,6 kbps).
• HSCSD (up to 43,2 kbps).
• CSD (up to 14,4 kbps).
• SMS (text/data).
• USSD (data).
As a lot of connection types are supported, you can choose one according price, reliability, speed or ease of use.
Dual-band:
• European (and Asian) version - 900 MHz / 1800 MHz.
• American version - 850 MHz / 1900 MHz.
The aluminum case of the device is very robust and perfectly suitable for installation into harsh environment such as cars, trucks, boats or other moving objects. Internal rechargeable battery with charge controller.

FM3101 has 3 digital inputs, 3 digital outputs and 3 analogue inputs, which could be used for performing tasks on remote objects, such as monitoring fuel tank level, engine status, or controlling truck door etc. FM3101 has 1-Wire® I/O protocol integrated for temperature measuring or key identification. FM 3101 has RS232 port which could be used foe external peripheral data acquire.

FM3101 is an open architecture device, which is fully programmable, so if you want to perform a very special task, you can totally adapt the device for your needs by writing your own Java™ IMlet or asking our technical staff to make it for you. TCP/IP and UDP stacks are integrated. AutoPIN feature enters the PIN code each time the device is turned on, while SIM card is still protected with code.

Get pdf FM3101 GSM / GPS Terminal Manual

FE-130/X-720/X-740 FE-140/X-725 Digital Camera Basic Manual

Set the date and time
1 Set the mode dial to h, and press the POWER button to turn the camera on.
2 Press the MENU button to display the top menu and select [SETUP] > [X] using the arrow pad (O/N/X/Y).
3 Set “Date format“, “Y“, “M“, “D“, “hour“ and “minute“ by following the operation guide.

b. Focus
1 Using the monitor, place the AF target mark over your subject.
2 Press and hold the shutter button halfway to lock the focus. The green lamp indicates the focus is locked.

c. Take the picture
1 Press the shutter button completely to take the picture
Pictures will be recorded in the internal memory of the camera. If the optional xD-Picture Card (hereinafter called “card“) is inserted into the camera, pictures will be recorded in the card.

TRANSFER IMAGES
a. Install the software
1 Insert the OLYMPUS Master CD-ROM.
2 Windows: Click the “OLYMPUS Master“ button. Macintosh: Double-click the “Installer“ icon.
3 Simply follow the on-screen instructions.

Get pdf FE-130/X-720/X-740 FE-140/X-725 Digital Camera Basic Manual

RS-232 Sound Level Meter 72-860A Instruction Manual

Thanks you for selecting our Sound Level Meter. To ensure that you can get the most from it, we recommend that you read and follow the manual carefully before use. This unit was designed according to the IEC651 , ANSI S1.4 for Sound Level Meters. The Sound Level Meter has been designed to meet the measurement requirements for Industrial safety offices and sound quality control in various environments

Ranges from 35dB to 130dB at frequencies between 31.5Hz and 8KHz.
Display with 0.1dB steps on a 4-digits LCD.
With two weighting , A and C.

Environment conditions
Altitude up to 2000 meters
Relatively humidity 90% max.
Operation Ambient 0 ～40℃

Maintenance & Clearing
Repairs or servicing not covered in this manual should only be performed by qualified personnel. Periodically wipe the case with a dry cloth. Do not use abrasives or solvents on this instruments. Do not use abrasives or solvents on this instruments.

Get pdf RS-232 Sound Level Meter 72-860A Instruction Manual

Windows TM Data Acquisition Software Model 407001 User Guide

Congratulations on your purchase of the Extech Model 407001 Data Acquisition Software Package that includes a CD-ROM and an interface cable. The software is dedicated for use with Extech’s Heavy Duty Meter Series. The 407001 software displays data in the following formats: Analog meter, Digital meter (with Max/Min readings), Data List, and X-Y Graph (for last 100 data points). Data is stored as a text file that can then be opened in spreadsheet and other software programs.

Hardware Connection
The Heavy Duty meter connects to a PC with the supplied DB-9 to 3.5mm mini-plug (mono) interface cable. The DB-9 end connects to the PC serial com port. The mini-plug end connects to the Heavy Duty meter.

Software Installation
NOTE: This program may require supporting files that are missing or more recent then those presently residing in the PC. If an error message appears during installation that indicates an update is necessary, go to the Microsoft web site (www.microsoft.com) to locate and perform the Windows Critical Updates and Service Pack Updates for the specific operating system.
1. Insert the supplied software disk in the computer’s CD-ROM drive.
2. Run the SETUP.EXE program included on the software disk.
3. When prompted, select a directory location for the program files.
PC Operating System compatibility: Windows TM 95 / 98 / 2000 / NT / XP

Get pdf Windows TM Data Acquisition Software Model 407001 User Guide

Evaluation Kits EVA 100 and EVA 105 User Manual

EVA 100 and EVA 105 are evaluation kits to support the development of applications based on the EnOcean RCM receiver modules and the TCM transceiver modules. The kits support a quickly evaluation of all RCM receiver operation modes as well as a quite easy setting-up operation of the receiver side when EnOcean transmitter modules are evaluated.

PTM Push-Button Powered Transmitter
• The PTM radio transmitter modules from EnOcean enable the implementation of wireless remote controls without batteries. Power supply is provided by a built-in pressure energy converter.
• Key applications are on-wall mountable flat rocker switches or handheld remote controls.

STM 110 Solar Powered Transmitter
• The extremely power saving RF transmitter module STM 110 of EnOcean enables the realization of wireless and maintenance free sensors.
• Power supply is provided by a small solar cell. An integrated energy store allows unrestricted functionality for several days in total darkness.
• Three 8 bit A/D converter inputs and 4 digital inputs facilitate multifunctional detector systems, based on application specific passive sensing components. This allows easily and comfortable monitoring of position, temperature, illumination, pressure, etc. - or simply supervising voltages or currents.

Get pdf Evaluation Kits EVA 100 and EVA 105 User Manual

ATT77025/7027 Programmer’s User Manual

ATT7025/7027 programmer is used to load a program in the memory of ATT702X. It uses another ATT7025 (Host MCU) which communicates with PC and target MCU. The PC transfers the program code and corresponding checksum to a flash chip connected with host MCU through serial port. User can start programming by clicking the button on PC or the red button on programmer board (without PC). The programmer will verify after finishing programming.

To install the ATT7025/7027 programmer hardware:
(1) Connect the programmer to the serial port of PC using RS232 interface cable.
(2) Connect an external power supply to the programmer. The voltage of the power supply must be between 9V and 15V.

Software Description
(1) Run OnePortPro.exe
(2) The main window is shown below:
1) OpenPort Open the serial port of PC
2) Openfile Open Intel hex file and and display program code in program buffer
3) FlashErase Erase 64K flash chip connected to host MCU
4) FlashWritten Transfer program code to the 64K flash chip connected to host MCU and calculate the checksum displayed in edit box “Checksum1”.
5) GetChecksum Read back the program code loaded to 64K flash chip and calculate another checksum displayed in edit box “Checksum2”. If the data in “Checksum1” is the same as the data in “Checksum2”, that indicates the program code loaded in 64K flash chip is correct.
6) TargetErase Erase the target chip (need to be programmed) which user puts in the socket
7) PFPM Program the code in 64K flash chip into the target chip’s flash memory

Get pdf ATT77025/7027 Programmer’s User Manual

TELTONIKA ModemCOM/G10 (CM100) User Manual

The PC and power supply source, to which the device “ModemCOM-TM2” is connected should satisfy LST EN 60950-1 standards. The device can be used with the first (Personal Computer) or the second (Notebook) computer safety class. In the installation place and supply circuits the protective devices should be tooled up (bipolar release device) which will protect the device from short-circuit and grounding troubles (Picture 1.1). The power of the release device should satisfy the power of connected to it devices. The interstice between release contacts should not be less than 3mm. The power supply network should be installed near device on easily accessible place.

Full disconnection of the device is performed by pulling out the constant current DC plug from the device. Data transfer cable for connection to another device must not be shorter than 2 meters.
Maintenance of the device:
If the device starts working faulty only qualified personnel may repair this product. We recommend dismantling the device and forwarding it tit repair center or to manufacturers. No exchangeable parts in the device.

This document will provide you with the instructions how to install and use ModemCOM/G10“ and its software. „ModemCOM/G10“ is a device designed for data transmission via GSM Network. The design of this modem enables the connection to your PC through COM interface. „ModemCOM/G10“ supports the following data-bearers: GPRS, CSD, CSF and SMS.

Get pdf TELTONIKA ModemCOM/G10 (CM100) User Manual

PLI-2030 200Mbps HomePlug AV Ethernet Bridge User Manual

HomePlug powerline is an excellent solution that can be used to extend your network. In the home or small office building, use HomePlug Ethernet Bridge Adapters to link multiple locations without the need to run Ethernet cable. Combined with a broadband DSL/Cable connection, every room with electrical power outlets will have easy access to high-speed Internet connection.

200Mbps HomePlug AV Ethernet Bridge allows you to connect any device which has an Ethernet port to a Power-line network. In operation, the 200Mbps HomePlug AV Ethernet Bridge is completely transparent, and simply passes data between the Ethernet port and the Powerline network. The Powerline data transfer rate can be reached up to 200Mbps. Any device may be connected to the 200Mbps HomePlug Ethernet Bridge’s Ethernet port, but a Windows PC must be used for configuration.

Setup
Configuration requires the use of Windows PC. Once configured, any device may be connected to the 200Mbps HomePlug AV Ethernet Bridge’s Ethernet port. To perform configuration, follow the procedures list below.
1. Connect a standard LAN cable from the 200Mbps HomePlug AV Ethernet Bridge’s Ethernet port to your PC.
2. Plug the 200Mbps HomePlug AV Ethernet Bridge into a power outlet.
3. Wait a few seconds for startup to be completed, and then check the LEDs
• The Power LED should be ON.
• The HomePlug LED will be ON if other HomePlug devices are detected, otherwise it will be OFF.
• The Ethernet LED should be ON.
4. Insert the supplied CD-ROM into your Windows PC, and wait for it to start, select “Utility” from the autorun screen. If it does not start automatically, locate and run SETUP.EXE.
5. Follow the prompts to install the PLI-2030 utility.
6. Microsoft .NET Framework 1.1 is needed for installing PLI-2030 utility. The wizard will check automatically whether the Microsoft .NET Framework 1.1 was installed on your PC or not. If not, the wizard will pop up a message box. Click OK to install Microsoft .NET Framework 1.1 first

Get pdf PLI-2030 200Mbps HomePlug AV Ethernet Bridge User Manual

PHR-100SU USB2.0 Hi-Speed/ SATA II Enclosure for 3.5” Serial ATA Hard Drive

Thank you for choosing the PHR-100SU aluminum SATA II/USB2.0 3.5″ Hard Drive Enclosure. This is an aluminum enclosure which supports 3.5” SATA I or SATA II hard drive. It is simple to install and comes with all the parts you need to create an external SATA II/USB2.0 device.
Based on SATA II, SATA I, USB2.0 and USB1.1 specifications the transfer rates are up to:
SATA II - 3.0Gb/s
SATA I - 1.5Gb/s
USB2.0 - 480Mb/s
USB1.1 - 12Mb/s

PHR-100SU can support the speed specification listed above, however its transfer rates are possible to be lower, and will vary depending upon the type of SATA and USB host controller, SATA Hard Drive and computer hardware.

Before you begin using the PHR-100SU, be sure to read this manual in its entirety.
This guide contains:
• SATA II/USB2.0 3.5″ Hard Drive Enclosure
• Hardware Installation
• Software Installation
System Requirements
• Windows PC, Macintosh desktop or NoteBook computer with available SATA and/or USB port
• MacOS X 10.2 and above for SATA connection, MacOS 9.2 and OS X for USB connection
• Windows 98SE/ Windows 2000/ Windows XP/ Windows Server 2003
* SATA connection is not supported under Windows98SE
• Pentium II/ compatible and above with 128MB RAM
• Both SATA II host port and SATA II hard drive are required for SATA II transfer speed
• USB2.0 host port is required for Hi-Speed USB2.0 transfer speed

Get pdf PHR-100SU USB2.0 Hi-Speed/ SATA II Enclosure for 3.5” Serial ATA Hard Drives

Portable Keychain Photo Album N1-101 Instruction Manual

Thank you for purchasing the Nextar N1-101 Portable Keychain Photo Album.
Please
read this manual to get the optimum performance out of this product.
Quickstart Guide
NOTE: YOU MUST INSTALL INCLUDED SOFTWARE BEFORE ATTACHING YOUR PHOTO ALBUM TO YOUR PC.

Software Installation:
1. Insert the included CD into your PC’s CDROM drive
2. Open “My Computer” and find the CD you just inserted. It will appear similar to the image below:
3. Double click the CD drive icon to open the CD.
** NOTE** THE ACTUAL DRIVE LETTER (D IN THIS CASE) COULD BE DIFFERENT ON YOUR PC. LOOK FOR THE DRIVE THAT IS THE CDROM ON YOUR PARTICULAR PC
4. Double click the “Digital Photo Frame Tool folder icon. Inside that folder, double click the “PhotoViewer vX.XX Setup (without bios).exe” icon. NOTE:
THE EXACT REVISION NUMBER OF THE VERSION ON YOUR CD COULD BE DIFFERENT THAN IN THE PHOTO BELOW
5. You will see the following screen: Using the DOWN navigation button on the side of the unit, move the cursor down to the USB Update position:
Then press the MENU (top) button to select the Update mode. The following screen will appear…

Get pdf Portable Keychain Photo Album N1-101 Instruction Manual

STM-19LV/17LV Professional Security LCD Monitor Instruction Manual

Before operating this product, please read the instruction manual.
1. Unplug this product from the wall outlet before cleaning.Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
2. Do not use this product near water.
3. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product.
4. Slots and openings in the cabinet and the back are provided for ventilation: to ensure reliable operation of the product, these openings must not be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a heat register.This product should not be placed in a built-in installation unless proper ventilation is provided.
5. This product should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
6. This product is equipped with a 3 wire grounding type plug having a third(grounding) pin. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.
7. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.
8. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all products plugged into the wall outlet does not exceed 10 amperes.
9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill any kind of liquid on the product.
10. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to service personnel.

Get pdf STM-19LV/17LV Professional Security LCD Monitor Instruction Manual

MICRO-AMP Version 2.0 VHF Amplifier Manual

This manual is for the Micro-Amp low power amplifier intended for use with the Micro-Trak APRS transmitters. The amplifier is a transmit-only device, meaning it is not suitable for use with transceivers. The amplifier was designed for low duty cycle operation, and does not have a heat sink suitable for continuous operation. The Micro- Amp is intended only for use only in the Amateur Radio Service.

The Micro-Amp utilizes very few components. The assembly of the PC board should start out with the installation of the two 22 Microfarad chip capacitors. The easiest way to install these devices is to first lightly tin the pads on the top side ground plane (the sides not connected to the traces) place the chip capacitor over the pad. Hold down the chip, and apply your soldering iron to the ground plane side pad. The surface of the pad will melt the solder on the chip, and tack that end down temporarily. Solder the opposite side pad down by heating the pad and capacitor end pad equally, and applying solder. Note that the 22 Mfd capacitors are polarized and must be installed in the correct orientation.

Install the 4700 PF capacitors in the spots as shown on the PCB layout and photo. Note that these are not polarized. Install the 10 Pf capacitor as shown in the circuit board layout and photos. Note that this capacitor is tipped with a black mark, which will distinguish it from the smaller 4700 PF capacitors. Polarity of this part is unimportant. Install the 1N914 or equivalent diode. This diode is for reverse polarity protection. Install the trimmer potentiometer and the three screw power terminal. NOTE: Make sure you point the recesses in the terminal block outward! It will be difficult to wire the unit if you install this part backward.

Get pdf MICRO-AMP Version 2.0 VHF Amplifier Manual

Hi-Fi Card Reader User’s Guide & Manual

This Hi-Fi Card reader allows you to listen to MP3 music with your home Hi-Fi or PC speakers directly from your USB Flash drives or SD/MMC memory cards. This Hi-Fi Card reader is compatible with USB 1.1/2.0 Flash drive, SD memory cards and Multimedia Card with MP3 music.

Main Features
Play MP3 music with your Hi-Fi Stereo system or PC speakers
Simply insert a compatible USB Flash drive or memory card into the card reader to play MP3 music Compatible Memory cards include USB 1.1 / 2.0 Flash drive, Secure digital (SD) and Multimedia (MMC)cards Download MP3 music from PC to SD/MMC card via the USB port

Precautions & Maintenance
The Card Reader is for indoor use only.
Please do not listen to music at extremely loud level,
Exposure to loud noise for a prolong period of time may be hazardous to your health.
To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
Do not block the ventilation holes on the back of the Card Reader at any time.
Keep your Card Reader out of sunlight.
Do not open the case of the Card Reader. This is a risk of electric shock. Opening the case will void your warranty.
For safety issue , please be careful for the Lithium Battery on the remote control.

Get pdf Hi-Fi Card Reader User’s Guide & Manual

G-MAX TM Micro ATX Series User’s Manual

This system unit is designed to be stable, safe, and easy to use. The system can be upgraded and expanded in function easily if correct procedure is followed. For your own safety and to avoid accidental damage to your system, please ensure you follow the following precautions:
Follow all the warnings and instructions marked on the products. To remove or clean the product, remember to unplug the power cord. Place your system unit in a cool, clean space, to be far away from water, heat and dust.

Before connecting any peripheral equipment, please unplug the power cord from the system unit to prevent unexpected damage. The AC input supplies power to the system unit. Check your dealer if you can not recognize the type of the power supply.

G-MAX TM series product, to adopt main board of design & development by GIGABYTE that is Micro ATX mechanical design in advance, let you work smoothly in Windows environment. Micro ATX adopt dexterous mechanical design, so it is ease by assembly & safeguard.

Get pdf G-MAX TM Micro ATX Series User’s Manual

KVM-9005 KVM Cat5 Extender User Manual

KVM Cat5 Extender is designed to control the PC, Server or KVM Switch up to 500 feet away from your Keyboard, Mouse and VGA monitor. KVM-9005T transmitter is to synthesize the signals of PS/2 keyboard, PS/2 mouse, and VGA monitor for being easily transmitted to a long distance over popular Ethernet CAT5 cable. KVM-9005R receiver is to take the synthetic signal and return it back to the signal s of PS/2 keyboard, PS/2 mouse and VGA monitor respectively.

KVM-Cat5 is a good solution for those noisy server room environment where is unsuitable for people to work for a long time, besides, it facilitates effective management on dispersive computers through one dedicated central control room, demonstration room, meeting room, or at your desk. CAT5 STP cable (Shielded Twisted Pair)/ UTP cable (Unshielded Twisted Pair) or enhanced cable like CAT5E/CAT6 cable is applied to LAN network popularly. KVM-9005 uses the same existing network construction to transfer local console signal to remote side. KVM-9005 allows you to move your console, i.e. Keyboard, Mouse and VGA monitor, to a suitable place for centralized control conveniently over LAN network. You just need to install a pair of extender, the transmitter and receiver, into local side and remote side respectively. It also saves your cable layout and installation cost.

Features:
Compact desktop size
Work with single PC, as well as the console port and PC port of KVM Switch
Work with CAT5, CAT5e, or CAT6 Ethernet cable
Distance up to 500 feet
Support standard 3-in-one KVM switch cable
Easy to install and friendly to set up the video signal via adjustable knobs.
Compatible with DOS, MS Windows, Linux, Unix, and Netware
No software required
High VGA resolution up to 1280 X 1024 (CAT5 cable up to 500 feet approximately)
LED indications for Power on/off and data transmission

Get pdf KVM-9005 KVM Cat5 Extender User Manual

886 mobileMate User Manual

Thank you for purchasing the mobileMate, 886, a global positioning system receiver with Bluetooth wireless technology. 886 is well suited to system integrations including PDA, smart phone, Tablet PC and Notebook PC with Bluetooth devices. It can satisfy a wide variety of applications such as PDA and smart phone navigation, automotive vehicle tracking, personal positioning and sporting. With the dimension of 44 x 26 x 15 mm and weight only 18g (w/ battery), 886 is an ideal solution to carry along everywhere.

886’s chargeable battery can save satellite information such as the status of the satellite signal, most recent location and the data and time of its last use. The low-power design has extended the operation time up to 11 hours and brought you the most convenient and longest usage of its kind. With the lead-free production process (starting Jan. 1, 2006), 886 is the most environmentally friendly wireless GPS receiver in the market. 886 has distinguished features others don’t have. With our patent pending Smart Power Save Mechanism and Fuzzy Auto On/Off features, our 886 consumes 65% less power than other Product, and can extend the operating time up to 11 hours.

Get pdf 886 mobileMate User Manual

ATC-863 Mini Power Wireless Module User’s Manual

ATC-863, the mini power wireless module, is used as the wireless data transmission in short distance. With the small size, weight and power consumption and good stability and reliability, it has the function of bi-directional data sign transmission, test and control. It is used for Wireless meter reading, such as water meter, electric meter and gas meter, parking meter, intellective card, electronic weighing apparatus, meter for checking on work attendance, queue wireless meter, building control, shipping company control, alarm system, intelligent equipment, Automatic data collecting system; Industrial remote control and remote test building automation, safety and security, powerhouse equipment wireless monitor, entrance control system, etc. It provide the USB power interface to be convenient for the mini computer and PC users if necessary.

ATC-863 Feature
1.Ultra low power transmission transmission power less than of 10mW, high receiving sensitivity: -110dbm ,
2. ISM frequency band, not requiring on application of frequency point
Carrier frequency of 433MHz，also capable of providing 315/868/915MHz carrier frequency.
3. High ani-interference and low BER (Bit error Rate)
Based on the GFSK modulation mode, it adopts the efficient communication protocol. The actual bit error rate of 10-5 10-6 can be achieved when channel bit error rate is 10-2.
4. Long transmission distance
Within the range of visibility, the reliable transmission distance is 300m (BER=10-3/9600bps).
5. Transparent data transmission
Transparent data interface is offered to suit any standard or nonstandard user protocol. Any false data generated in the air can be filtrated automatically (What has been received is exactly what has been transmitted). The charge time for receiving and sending <10ms.
6. Multi-channel and speed
The standard ATC-863 configuration provides 8 channels. to meet the multiple communication combination mode of the users. It has baud rate to be chosen such as 1200bps、 2400bps、4800bps、9600bps、19200bpss. The wireless transmission rate is direct ratio with baud rate of interface to meet user’s equipment requirement.
7. High speed wireless communication and Large data buffer
When the speed rate in the air is quicker than interface’s, allowing to transmit unlimited length data at one time, when the speed rate is slower or equal the interface’s, allowing the transmission of 255 Bytes long data frames at one time for more flexible programming by users.
8. Intelligent data control and the user doesn’t need to prepare excessive programs
Even for semi duplex communication, the user doesn’t need to prepare excessive programs, only receiving/transmitting the data from the interface. ATC-863 will automatically complete the other operations,such as transmission/receiving conversion in the air, control, etc.

Get pdf ATC-863 Mini Power Wireless Module User’s Manual

MX-3141PCA 4×1 Component and PC Video And Audio Switcher Instruction Manual

The MX-3141PCA is designed to switch 4 different Video inputs and their associated stereo audio inputs. The Video I/O is VGA or YPbPr and the Audio I/O are Right and Left channel Analog Audio. Our professional video conversion products have been serving the industry for over twenty years. TV One offers a full line of high quality Video Scalers, Scan Converters, Analog-Digital (DV, SDI, HD-SDI, DVI) Converters, Standards Converters, Digital Video Recorders, Frame Synchronizers, Time Base Correctors, LCD Monitors, Matrix Routing Switchers and Distribution Amplifiers.

The MX-3141PCA 4×1 HDTV Video and Audio Switcher has many features that enable it to perform in a superior manner. Among those features you will find:
• Supports HDTV Video: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p
• Supports PC Video: VGA, XGA, SXGA, UXGA, WUXGA
• Allows the User to freely Intermix PC and HDTV Video inputs
• Stereo Analog Audio I/O
• Both front panel and remote control
• RS-232 Interface for system integration
• LED input selector indicators
• Analog Stereo Audio-Follow-Video Switching

Get pdf MX-3141PCA 4×1 Component and PC Video And Audio Switcher Instruction Manual

300 Watt Pure Sine Wave Inverter Installation and Operation Manual

STEP 1 - Mounting
Locate the SureSine on a surface that is protected from direct sun, high temperatures, corrosive fumes, and water. SureSine may be mounted horizontally on a flat surface (like a table) or vertically (on a wall). Do not install in a confined area where battery gasses can accumulate. Place the SureSine on the surface where it will be mounted and determine where the wires will enter/exit. Be sure there is sufficient bending room for the wires and other auxiliary connections. Verify that the mounting screws will not penetrate wires or other objects located on the opposite side of the surface. With a pencil or pen, mark the mounting hole locations

With a drill and 1/8” (3 mm) bit, drill pilot holes for each of the four mounting screw locations marked on the mounting surface. Place the SureSine onto the surface and align the mounting feet holes with the four pilot holes. Use the included #10 screws to secure the SureSine to the surface.

STEP 2 - Setup
DIP Switch 1 - Power Mode
Select the desired power mode. In the Always ON mode, the inverter provides continuous AC output. Standby mode is an energy saving mode. When an AC load greater than 8W is detected, the AC Output is automatically turned on. When the total load falls below 8 Watts , the AC Output is automatically turned off to conserve energy. Loads are detected in one (1) second or less.
Down Position: Always ON (factory default)
Up Position: Standby Mode
DIP Switch 2 – Low Voltage Disconnect
Select the Low Voltage Disconnect (LVD) and Reconnect (LVR) setpoints.
Down Position: LVD = 11.5V, LVR = 12.6V (factory default)
Up Position: LVD = 10.5V, LVR = 11.6V
DIP Switch 3 – LVD Warning Beeper
Enable or disable the LVD audible Warning Beeper.
Down Position: Beeper Warning ON
Up Position: Beeper Warning OFF
DIP Switch 4 – Communications Select
Specify the desired RJ-11 communication protocol. Select Meterbus for Morningstar remote meters and other Morningstar products. Select Modbus protocol for PC communications. An adapter is required (not included)
Down Position: Morningstar Meterbus (factory default)
Up Position: Modbus Protocol

Get pdf 300 Watt Pure Sine Wave Inverter Installation and Operation Manual

BB 150 ADCP Technical Manual

The ADCP emits an acoustic pulse called a PING. Scatterers that float ambiently with the water currents reflect some of the energy from the ping back to the ADCP. The ADCP uses the return signal to calculate a velocity. The energy in this signal is the echo intensity. Echo intensity is sometimes used to determine information about the scatterers.

The velocity calculated from each ping has a statistical uncertainty; however, each ping is an independent sample. The ADCP reduces this statistical uncertainty by averaging a collection of pings. A collection of pings averaged together is an ensemble. The ADCP’s maximum ping rate limits the time required to reduce the statistical uncertainty to acceptable levels.

The ADCP does not measure velocity at a single point; it measures velocities throughout the water column. The ADCP measures velocities from its transducer head to a specified range and divides this range into uniform segments called depth cells (or bins). The collection of depth cells yields a profile. The ADCP produces two profiles, one for velocity and one for echo intensity.

The ADCP calculates velocity data relative to the ADCP. The velocity data has both speed and direction information. If the ADCP is moving, and is within range of the bottom, it can obtain a velocity from returns off the bottom. This is called bottom-tracking. The bottom-track information can be used to calculate the absolute velocity of the water. The ADCP can get absolute direction information from a heading sensor.

Get pdf BB 150 ADCP Technical Manual

PLUSTV 1440ex User’s Manual

The PLUSTV 1440EX uses the professional progressive scanning TV (DPTV) chip, which adopts such picture improvement technologies as black level stretch, video noise suppression, and 3D motion compensation etc, so it gives clearer and more flamboyant pictures and stronger three-dimensional perception.

In addition, its specific scanning frequency increasing technology increases the refresh frequency from original 50Hz to 60Hz or 75Hz* (optional), which effectively conquers the large area flicker and interline flicker in picture caused by the low refresh frequency (50Hz only) of ordinary TV and improves the stability of picture, so it can reduce the visual fatigue due to long TV watching.

The PLUSTV 1440EX can support CRT monitor and traditional or wide-screen LCD monitor. It is the increases of fresh frequency and resolution (up to 800X600/ 1024X768/ 1280X1024/ 1440X900) that solve the problem that ordinary PC TV receiver is not compatible with LCD monitor. Connecting this product with an LCD monitor, you can easily get a fashionable and healthy LCD TV.

The PLUSTV 1440EX has PIP (Picture In Picture) function at PC mode, which allows you to enjoy wonderful TV programs while operating PC, so neither work nor entertainment is held up. Furthermore, it has multi-channel pre-view function, which enables you to view the program of each channel conveniently. In addition, the PLUSTV 1440EX has 3D noise reduction function, which makes the picture more exquisite, clearer and more stable.

Get pdf PLUSTV 1440ex User’s Manual

VT8000 8” Touchscreen VGA Monitor User Manual

The 8” VGA Monitor is a small versatile LCD monitor that hasVGA capabilities. It also includes video inputs allowing it to perform double duty as a video monitor. Using the Touch screen feature you could use this as a interactive display in a kiosk or other display. You can also use it as a second VGA display with your laptop or powerbook for field editing.

Operation
1. POWER ON/OFF/STANDBY:
Always use the enclosed power supply. After connecting the power, the monitor will be in at standby mode. Press the “pow” button on the monitor or the “power” button on the remote control.to turn on the monitor. Press the same button again, the monitor will return to its standby mode.
2. MAIN MENU(From left to right):
Auto adjustment; display position adjustment; image adjustment; osd adjustment; other setting; video adjustment; menu exit. After connecting, press the “menu” button on the unit or remote control. The “main menu” will appear on the screen. Use the button” “ (move to the left) “ “ (move to the right) on the unit or “ / ” on the remote control to choose a setting then press the “menu” button again to confirm. For the sub menu, you can use the volume / on the unit or / on the remote remote control for adjustments. To return to the main menu, please choose “exit”, then confirm by pressing “menu” button again.
3. OSD ADJUSTMENT (MENU POSITION ADJUSTMENT):
The users can adjust the position of menu display. Choose in the main menu, in the sub menu, then use / for the horizontal adjustment; Similarily, is for the vertical adjustments.
4. SELECTION OF INPUT SIGNAL :
The unit is provided with VGA jack and AV1 and AV2 input signal. Therefore it could be used along with a computer, monitor camera system as well as a DVD player. To work as a computer display, input the PC signal into the VGA jack. then press the “PC/ AV” button on the front panel.

Get pdf VT8000 8” Touchscreen VGA Monitor User Manual

Planar LCD Monitor PV150 Manual

Your New Planar LCD Monitor has been designed to be versatile, ergonomic and user-friendly. Your New Planar LCD Monitor is capable of displaying most standards, from 640 x 480 VGA to 1024 x 768 XGA. The digital controls located on the front panel allow the user to easily adjust the Monitor’s display parameters. Your New Planar LCD Monitor’s small footprint allows you more room in your workspace for other peripherals. Lightweight and compact, your New Planar LCD Monitor is the perfect solution for users on the go. You can use your New Planar LCD Monitor for everything from making business presentations to playing computer games. The two stereo speakers allow you to further expand your computer’s multimedia capabilities by connecting your computer’s Audio out port to your New Planar LCD Monitor’s Audio in port. If you have a complete full workstation, your New Planar LCD Monitor has the additional feature of an optional wall-mountable stand for added convenience.

The architecture of your New Planar LCD Monitor incorporates an LCD panel that produces a clear display with low radiation emission, limiting health concerns. With its low power consumption, your New Planar LCD Monitor helps you reduce your power bill.

Unpacking
Before you unpack your New Planar LCD Monitor, prepare a suitable workspace for your New Planar LCD Monitor and computer. You need a stable, level and clean surface near a wall outlet. Even though your New Planar LCD Monitor uses very little power, you should put it in a location that allows sufficient airflow to ensure that your New Planar LCD Monitor and your computer do not become too hot. Set up your New Planar LCD Monitor so that the panel does not face a window where sunlight often comes in. The glare caused by sunlight reflecting off your New Planar LCD Monitor’s screen will make it difficult to see.

Get pdf Planar LCD Monitor PV150 Manual

Recabinet User’s Manual

Recabinet is a library of convolution impulse responses, and is compatible with a wide variety of convolution impulse response software plugins. These plugins are designed to run in a variety of recording software for PC and Mac. Some of this software is free, and in our testing, is just as good as the paid software for use with Recabinet. If you do not currently have recording software, we recommend Reaper for the PC, and GarageBand for the Mac. Reaper is free to try out, and inexpensive for non-commercial use. GarageBand is included with Macs made in the last few years. If you do not currently have a convolution impulse response plugin, we recommend keFIR for the PC, and LAConvolver for the Mac, both of which are free.

Cabinets and Mics
Recabinet is organized in 3 main folders, each containing a collection of impulse response les for use with a convolution impulse response plugin. For most of these plugins, you will use the “Other Hosts” version. For Altiverb and AxeFX, use the specic versions provided

Each subfolder represents a dierent real-world cabinet (with a silly nickname for legal reasons.)
Cabinets
• “Angora”- Line 6 Vetta 4×12
• “Damien”- Marshall 1936 2×12
• “Ghandi”- Mesa Standard/Oversize 4×12
• “Genzie”- Genz Benz G-Flex ported 2×12
• “Igor”- Krank Krankenstein 4×12
• “Kirby”- Carvin 4×12 British Series
• “Manatee”- Ampeg SVT 8×10 Bass Cabinet (using Ampeg SVT Pro Classic power section)
• “Sterling”- Marshall Hand Wired 4×12 (late 1960s reissue)
• “Trapezoid”- Roland Micro Cube (using native power section)

All 4×12 and 2×12 cabinets were powered using a Randall RT2/50 power amp, loaded with 6L6 and EL34 power tubes. They were sampled using 4 different microphones, listed below:
Microphones
• “57″ - Shure SM57 - industry standard dynamic microphone, the most popular microphone for guitar recording.
• “i5″ - Audix i5 - modern industry standard dynamic microphone, for a full-range, aggressive response.
• “4060″ - Audio Technica 4060 - modern high-SPL condenser microphone, for warm, full-bodied tone.
• “D6″ - Audix D6 - modern kick drum mic, great for getting the low “cabinet rumble”tone as a blend-in with your primary tone.

The “57”and “i5”mics were sampled in 4 different positions (cap, edge, cone, edge45), at 3 depths per position (on the grill, 1/2 inch away, and 1 inch away.) See the Microphone Positioning Diagram for a visual representation. All microphones were sampled using the amazing Universal Audio 2-610 mic preamp, with the exception of the beta “Ghandi” impulses, which were sampled using the stock mic preamps on a Presonus Firepod audio interface.

Get pdf Recabinet User’s Manual

SENTINEL-SENSE 2.6 EA Installation & Operation Manual

AWID’s Sentinel-Sense 2.6 EA is a long-range (12 to 15 feet) Radio Frequency IDentification (RFID) reader module with RS-232 I/O interface that works with most leading passive UHF passive tags. The reader module comes with a unique combination of long read range, small size, and low power consumption. The reader module has an internal power converter, allowing it to work with a wide range of supply inputs without affecting its performance. Its primary applications are asset management and tracking, and fleet management applications.

The 2.6 EA reader modules are delivered with firmware version 2.xxM. In order to operate an 2.6 EA you will need the following: PC running Windows 98 or higher, CD-ROM drive and one RS-232 serial port. Host software (AWIDs demo software or your own custom software)

MEASURING READ DISTANCE
Make sure you know the tag types. For certain readers and tags, user must also be mindful of the tags orientation and the readers antenna orientation, what mounting surface the tags are designed for and how the tags are supposed to be mounted. Any departure from its intended purpose will drastically affect the readers ability to energize the tag and its read range.

When measuring the readers read range, make sure that the tag is properly oriented to the reader antenna, and for optimum performance, be sure the operators finger is not within three (3) inches of the tags antenna surface.

Get pdf SENTINEL-SENSE 2.6 EA Installation & Operation Manual

Transio TCF-90-M/S User Manual

The TCF-90 is a compact sized, high-speed, RS-232 to optical fiber converter that extends RS-232 transmission from 15 meters to 5 km (TCF-90-M, multi-mode) or 40 km (TCF-90-S, single-mode), without using external power. The TCF-90 is designed to get power from the attached serial port. A pair of TCF-90 converters can be used to connect two RS-232 serial devices to each other in full duplex transmission mode using optical fiber. Moreover, the TCF-90 isolates the devices from dangerous increases in ground potential, ground loops, and electrical EMI/RFI noise. This greatly reduces RF radiation and susceptibility to electromagnetic radiation to enhance data security.

Installation
Typical Applications
Connecting RS-232 devices to the TCF-90 is easy. The ST-type optical fiber connector is designed especially for data communication applications that transmit data between or within buildings. The TCF-90 can be used for industrial applications and for applications that require secure data transfer.

Port Power Dissipation
When installing an RS-232 port-powered TCF-90 converter, pay attention to the power consumption, RS-232 cable length, and the power provided by the serial port. In general, the TCF-90 gets 70 mW from the power source; a standard COM port on a host PC can provide 70 to 90 mW of power if the TxD, RTS, and DTR lines are connected. Moreover, the RS-232 cable length should be shorter than 15 m (@ 9600 bps) to ensure that less power is lost as the host/device supplies power to the TCF-90. The rest of the supplied power is used for transmitting the optical fiber signal.

Serial Port Power Compatibility
Serial ports can use any of a number of diverse interface chips, but the power provided by the different types of ports is not always the same. In fact, some ports do not supply enough power to activate the TCF-90.

The on-board COM1 and COM2 ports seldom have problems. The table shows the MOXA serial cards and serial-to-Ethernet device servers that can be used as a good power source to drive the TCF-90 when their RTS/DTR signals are connected and in the ON state.

Get pdf Transio TCF-90-M/S User Manual

MSR210D SERIES Magnetic Stripe Card Reader Keyboard Interface Simple Manual

The MSR210D Series Keyboard Interface Magnetic Card Reader is ideal for retail systems, time keeping systems, security systems and the card reader related systems. The MSR210D series are designed to offer the user a card reader solution that will complement many applications. Triple track MSR210D reader is uniquely designed to read both credit cards and Driver Licenses (AAMVA and California standard).

FEATURES
1 LED and Buzzer indicators indicate the status of reader.
2 Single, dual, or triple track versions allow to reading ISO, AAMVA and DMV cards.
3 User-friendly setting directly by keyboard.
4 PC could be powered on with MSR210D attached and without keyboard connected.
5 Programmable data output.
6 Compact size that can be mounted on keyboard or any flat surface.
7 Firmware download (Note: It can’t be executed via Notebook PC.)

How to enter Configuration Mode
1. Power off PC, connect the reader with PC and then power on.
2. Execute text editor program such as Microsoft Word, Notepad, DOS PE2, Edit, …etc.
3. Press and hold [Left-Ctrl], [Left-Alt] and [F10] keys in order to enter Configuration Mode.
4. Operating step-by-step following instructions as shown on the screen.
5. While in Configuration Mode, the green LED is always blinking. After exiting this Configuration Mode, the reader will be reset automatically.
6. The main menu of Configuration Mode

Get pdf MSR210D SERIES Magnetic Stripe Card Reader Keyboard Interface Simple Manual

KC Wirefree Bluetooth Starter Kit User’s Manual

KC Wirefree Bluetooth module offer simple yet compact Bluetooth platform for embedded application. Since it comes with surface mount layout, starter kits have been developed to ease user to explore the possible development and application.

This document describes the use and starting guide for KC Wirefree Bluetooth starter kit. For details of KC Wirefree Bluetooth module, please refer to data sheet or beginner guide document which can be downloaded at www.cytron.com.my KC Wirefree Bluetooth Starter Kit, SKKCA has been designed for 5V TTL logic interface, no extra voltage divider is necessary. With minimum interface, it is ready to connect to microcontroller for embedded Bluetooth development.

Furthermore, on board USB to UART converter offer easy yet reliable communication to PC for functionality test or even creating Bluetooth wireless connection.

It has been designed with capabilities and features of:
• Either KC21 or KC11 mounted
• USB Plug and Play UART function
• 5V powered
• 5V UART interface, ready for microcontroller interface
• Default baud rate of 115.2Kbps
• Compact yet easy and reliable platform
• As USB Bluetooth dongle
• As serial port replacement (wireless)

Get pdf KC Wirefree Bluetooth Starter Kit User’s Manual

Electronic Gadgets Manuals