AirStation WHR-HP-G54 High-Power Wireless Cable/DSL Smart Router User Manual

AirStation WHR-HP-G54 High-Power Wireless Cable/DSL Smart Router User Manual

Work and play - further and faster! Eliminate dead spots and enjoy faster connections with vastly extended range from Buffalo Technology’s amazing wireless solution, the AirStation High Power Wireless Broadband SmartRouter.

System Requirements
• A high-speed (Broadband) Internet connection or existing local area connection.
• A computer with a network connection (wired or wireless) and a good web browser. The screenshots in this manual were taken with Firefox, but Netscape and Internet Explorer are also supported in versions 4.5 or later, and Safari 1.0 and later are supported with Macintosh OS X 10.2 and later.

AirStation WHR-HP-G54 Package Contents
The AirStation WHR-HP-G54 package contains the following items:
• WHR-HP-G54 Base Station
• Antenna
• AC adapter and power cable
• CAT5 LAN cable
• Utility CD with Manual
• Quick Setup Guides
• Warranty Statement

Begin by finding a good place to set up your router/access point. Some things to consider:
• You’ll need to be able to plug your internet connection into it, so it should go within reach of the LAN cable from your DSL or Cable modem. You’ll also want a power outlet nearby.
• Keep the access point as central in your work area as possible. Signal strength and speed fall off with distance.
• Higher is often better. For instance, set it up on the top shelf of a bookcase rather than the bottom one, if possible.

Get pdf AirStation WHR-HP-G54 High-Power Wireless Cable/DSL Smart Router User Manual

Programmable POS Keyboard User’s Manual

Programmable POS Keyboard User’s Manual

Main Features
65/78/111/118 keys programmable keyboard with mechanical stroke using full-height Cherry key-switch
True keyboard wedge function; operating with or without the normal pc keyboard
With internal metal plate for key fixation, better to protect against ESD
Multi-Layer programming capability
No TSR program required; avoids application software crashes
Character sets supports: - All alphanumeric characters
- 12 functions keys
- All IBM keyboard special keys (Shift, Ctrl, Alt, Esc etc.)
- 255 ASCII codes
Selectable program mode in ASCII code or SCAN code Each key can be programmed up to 255 bytes, depending on the size of the built-in non-volatile memory
Can be cascaded with a normal PC keyboard, barcode interfaced or magnetic card reader through the built-in PS/2 port
Each key can be programmed as either strings or single letter key-assignment

MagStripe Reader Features (optional):
Comply with ISO 7812, IBM standards, American Driving License
Support multi-country code settings
Support programmable MSR setting for the header, tailor, separator, suffix and prefix, track sequence
Track 1: 210BPI with max 76 characters
Track 2: 210BPI with max 107 characters or 75BPI with max 37 characters
Track 3: 210BPI with max 107 characters
Card swipe speed: 10 to 100 cm/sec.
500,000 swipe cycles
Available Configuration
Dual Track: Track 1 & 2 or Track 2 & 3
Triple Track: Track 1, 2 & 3

Get pdf Programmable POS Keyboard User’s Manual

EtherUSB USB Ethernet Access Point for PDA User Manual

EtherUSB USB Ethernet Access Point for PDA User Manual

The EtherUSB™ EA104 is a USB Ethernet Access Point for connecting PDA and smartphone with Windows Mobile for Pocket PC 2003/2003SE operating systems (OS), CE5.0, CE.NET4.1/4.2 and Windows Mobile 5.0 (see Appendix B) to an Ethernet network. Connection is established using a PDA USB cradle or with USB cables via the PDA USB port to10/100 Base-T Ethernet network. EA104 belongs to EtherUSB™ product line.

EA104 is equipped with 4 USB host ports and four 10/100 Base-T ports, one for uplink to the Ethernet network and three for optional connection of PC or computing devices. EA104 provides TCP/IP-based network connectivity for up to 4 PDA devices simultaneously using a PDA USB cradle or USB cables and the server side 10/100 Base-T network

Each connected PDA can perform server synchronization, Internet browsing, and file transfer. This solution provides an alternative network connection other than WiFi, while offering higher security and reliability standards. It works perfectly for the mobile users, field application personnel, and any environment that requires a high level of security and reliability. 500mA power provided to each USB port enables recharging of PDAs while connected.

HARDWARE INSTALLATION
Please confirm the following items have been included in the shipping box with the main product.
1. EA104 main unit
2. 180cm (6’) Ethernet cable
3. 5VDC/3A power adapter, 2.1×5.5mm plug, center positive polarity
4. A paper notice that indicates the website from which to download the EA104 Users Manual (this manual), Data Sheet and about WM5.0 device connection

Get pdf EtherUSB USB Ethernet Access Point for PDA User Manual

Op-Torq Field Test System Installation and Operation Manual

Op-Torq Field Test System Installation and Operation Manual

The Op-Torq Field Test system is designed to work in conjunction with Binsfeld Engineering’s TorqueTrak series (10k, 9000 and Revolution) Torque measurement sensors. It’s a specialized data acquisition system based on a software with powerful graphical tools and a USB acquisition module to measure torque and rpm (optional).

PC / Laptop with Op-Torq Field Test software
The Op-Torq Field Test software has to be installed on a PC / Laptop running on Windows XP or Vista. The PC / Laptop have to be supplied by the customer. The software allows a simple and straight forward data acquisition from the TorqueTrak series instruments. It also allows combining RPM measurement to the torque measurement to obtain power values.
RS 232 / USB converter
The RS-232 / USB converter allows connection to computers that are not equipped with RS-232 ports. It also allows auto-detection of the connected components.
RPM / Analog acquisition module
The acquisition module converts analog and pulse signals to RS-232 to allow communication with the computer.
It is used for the following configuration:
- TT10K with optional RPM measurement
- TT9000
- TT Revolution
For TT10K without RPM measurement, this module is not used even if two TT10K are used.
Cabling
The cables required for operation are supplied with the system, except for TT Revolution configuration, the analog signal cable have to be supplied by the customer or added to the order.
TorqueTrak instruments
The TT series instruments are available from Binsfeld Engineering.
RPM pickup (optional)
The RPM pickup is included in the RPM measurement option. It is mounted on an adjustable magnetic base for fast and accurate mounting and positioning for shaft rpm measurement. A set of four powerful permanent magnets are also supplied with this option. The number of magnets to install on the shaft is function of the measured rpm value.

Get pdf Op-Torq Field Test System Installation and Operation Manual

VAP11G WiFi Bridge IEEE 802.11b/g User Manual

VAP11G WiFi Bridge IEEE 802.11b/g User Manual

With this portable device, VoIP Phone Adapters, IP Phones and other IT products with Ethernet RJ45 port can access wireless network easily. Two kinds of application topology of VAP11G are shown as below.

VAP11G provides users a combination of Ethernet network and power cable, VAP11G uses the original power supply of VoIP phone adapter or some other IT products’ power supply which has DC 2.0 power jack (5-15V, 1.5W). One power supply can power VAP11G, as well as the VoIP phone adapter.

Please use power supply with the polarity as shown below. Power supply with different polarity will damage VAP11G and the devices which the power supply belongs to. Vonets will NOT be responsible for the loss caused by using the incorrect power supply. (Both Power Jack and Power Port are compliable with this polarity)
Alternatively, Vonets can also provide power supply for VAP11G(Optional).

WPA
WPA automatically uses TKIP with dynamic encryption keys. Enter a passphrase on this screen. Encryption - TKIP is automatically selected as the encryption method. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be. Click Next to proceed, or click Back to return to the previous screen.

WPA2
WPA2 automatically uses AES with dynamic encryption keys (AES is a stronger encryption method than TKIP). Enter a passphrase on this screen. Encryption - AES is automatically selected as the encryption method. Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field. The longer and more complex your Passphrase is, the more secure your network will be.

Get pdf VAP11G WiFi Bridge IEEE 802.11b/g User Manual

Mini Solar BT GPS Receiver G55 User’s Manual

Mini Solar BT GPS Receiver G55 User’s Manual

Mini Solar BT GPS Receiver is a total solution of GPS receiver. GPS antenna, BT transmit/receive system are included. It is designed on the most advantage MediaTek Chip Solution, got the full-function, and RoHS compliant, industry-level locating capacity and low prices.

You can use this Mini Solar BT GPS Receiver as vehicles navigator, security system, geographic measurement, investigations or agriculture purpose. Mini Solar BT GPS Receiver operation requirement is a proper power supply and the open sky-view. This BT GPS Receiver can communicate with other electronic devices by BT interface. Built-In Flash Memory can save satellite information and do almanac refresh periodically. This will shorten Time To First Fix (TTFF) effectively.

Patent protected Mini Solar Cell design can extend the device usage time up to 20 hrs. This is much longer than competitors’. Lithium-ion battery can be re-charged reasonably under nature or artificial sunlight no matter G55 receiver is turned on or off. Most of time, you are free of charger!

Mini Solar BT GPS Receiver is designed as a high position accuracy. It will update the satellite position every second. The Mini Solar BT GPS Receiver auto-locating feature is capable of automatically determining a navigation solution without intervention. However, acquisition performance could be interfered and do cold start if the receiver were initialized with occurrence of the following events:
1) First in use
2) The GPS receiver is not in use for more than 3 months or transportation over distances further than 500 kilometers.
3) Failure of the internal memory battery without system standby power.
4) Change Li-ion battery

Get pdf Mini Solar BT GPS Receiver G55 User’s Manual

Quattro User Manual

Quattro User Manual

The Quattro is a high quality speakerphone for use in medium to large conference rooms. It has an exceptionally large pickup and broadcasting range yet it is small in size. The Quattro utilizes multiple microphones, multiple speakers and a powerful DSP to obtain its performance.

In its basic configuration the Quattro is designed for PC VoIP communication. In addition the Quattro may include an interface module that will communicate directly with your telephone line or other communication devices, per your choice. The Interface module can be replaced by the factory or by an approved dealer. Please send an e-mail to support@phnxaudio.com or call your dealer for details.

This manual covers instruction for the installation and usage of the Quattro in its basic configuration and with several selected interface modules. Specific instructions for other interface modules will be provided separately when you purchase a unit with that specific interface.
Interface modules that are detailed in this manual include:
- PSTN interface (POTS telephones)
- VCA (video codec and analog) interface
- Daisy Chain interface

Key Features
- Extended and powerful broadcasting capability:
As a result of its unique design the Quattro drives up to 25 Watts peak power through its loudspeakers, delivering a strong and clear output signal. This feature is critical in large room coverage.
- Ganging capability:
The user can gang unlimited number of units for extended size room coverage. Each ganged unit will perform independent audio pickup processing and deliver it to the unit in front of it in the chaining hierarchy. The higher hierarchy unit will select the best available audio signal to pass on. Each of the ganged units will also transmit the output signal (more details in the Daisy Chain Interface chapter).
- Battery operation:
Each of the interface modules includes a built-in rechargeable battery. The unit does not have to be connected to the power supply for power. The user will be notified when the battery power is low. The unit can be recharged through the USB or with AC/DC wall mount power supply (supplied with the interface module).
- Three-Way communication:
When using the Quattro with both the computer (through the USB interface) and an additional communication device (through the additional interface module - like the PSTN line) the Quattro mixes the incoming and outgoing signals so that the three partners (the Quattro user, the telephone communication and the computer communication) are full participants in the conference.

Get pdf Quattro User Manual

EDID Reader/Writer CV-1001 User Manual

EDID Reader/Writer CV-1001 User Manual

The CV-1001 is a device that can emulate the EDID (Extended Display Identification Data) information. It stores and recalls a default EDID setting in non-volatile memory allowing your computer boot directly from EDID Reader/Writer. It can also read and store the EDID of your display and even let you modify the EDID and upload the modified EDID to displays.

*Extended Display Identification Data (EDID) is a standard data format that contains basic information about a monitor and its capabilities, including vendor information, maximum image size, color characteristics, factory pre-set timings, frequency range limits, and character strings for the monitor name and serial number.

The information is stored in the display and is used to communicate with the system through a Display Data Channel (DDC), which sites between the monitor and the PC graphics adapter. The system uses this information for configuration purposes, so the monitor and system can work together.

Feature:
Keeps computers from deactivating inactive DVI port
Reads and remembers the EDID of displays
Writes EDIDs into the EDID Re/writer or the displays
Default EDID built-in
No power required after initial programming
Maintain DVI video resolution

Get pdf EDID Reader/Writer CV-1001 User Manual

PTP-B VGA / Audio Extender User’s Manual

PTP-B VGA / Audio Extender User’s Manual

Advantage
1 VGA input for PC VGA port, which can be output to LCD monitor or other video output device with VGA port.
1 Audio input, which can be output to speakers.
Use Cat5E cable transmitting optimizes the video quality.
No need to unplug VGA cable frequently, prevent the cable and device damage.

Feature
With Transmitter and Receiver, send the source signal to projector. VGA/AUDIO signal transmits via one Cat5E STP cable. Support resolution 1280*1024, transmission length 10/20/30/40/50/60M/300M. Easy to install.

Specification
PTP-B Transmitter PTP-308B
1 VGA input, for PC, Laptop , etc.
1 VGA output, for LCD monitor.
1 AUDIO input, Line-in to this connector, as the PTP system audio source.
1 AUDIO output, for speakers.
1 RJ-45 connector, VGA/AUDIO signal transmitted on one Cat.5E cable.
With external power adapter.

PTP-B Receiver PTP-108B
1 VGA output, for Projector input.
1 AUDIO output, for speakers.
1 RJ-45 connector, for receiving.
With external power adapter.

PTP-108B unit connects to project; in order to secure the video quality, there are 6 models for different cable length:
. PTP-108B-10: uses 10m±1m Cat.5e cable
. PTP-108B-20: uses 20m±1m Cat.5e cable
. PTP-108B-30: uses 30m±1m Cat.5e cable
. PTP-108B-40: uses 40m±1m Cat.5e cable
. PTP-108B-50: uses 50m±1m Cat.5e cable
. PTP-108B-60: uses 60m±1m Cat.5e cable

Get pdf PTP-B VGA / Audio Extender User’s Manual

Freezone Elite CPU Cooler Installation Guide

Freezone Elite CPU Cooler Installation Guide

Included with your Freezone Elite system is everything pictured below. Before you start the Installation, please take a moment to verify that you have all the parts necessary to complete the installation.

Open PC Case.
Please follow the recommended manufacturer instructions to open your PC Case. (Figure 2)
For the rest of the installation procedure, it is recommended to lay your PC on its side. First, carefully remove the CPU heat sink/fan assembly. (Figure 3) Next, remove the exhaust fan from the rear of the case as shown in (Figures 4 and 5)

Installing the Fluid Heat Exchanger (FHE)
There are 2 different types of retention mechanisms included with your Freezone Elite system. Now is the time to take note of which type you will use for your system and follow the appropriate instructions. If you are unsure how to classify your installation please visit www.coolitsystems.com and consult the FAQ

For Intel Socket 775 or AMD AM2 Based Systems
Remove heat sink retention bracket from motherboard. (Figure 6) Clean Thermal Compound from CPU Cap using a paper towel or a clean cloth. (Figure 7)
LGA 775 motherboards must be removed to install the hardware. Install standoffs [Part K] into the holes from which you removed the old heat sink retention frame. Ensure you place one of the provided nylon washers between each stand-off and the mother board, align the stand-off with the motherboard hole, place another nylon washer on the provided fastener before threading it into the standoff from the underside of the motherboard. Tighten with the appropriate Phillips screwdriver.

Get pdf Freezone Elite CPU Cooler Installation Guide

PS2100 Logging Depth Sensor User Manual

PS2100 Logging Depth Sensor User Manual

The Greenspan PS2100 performs measurement, processing and storage of pressure/temperature data within a compact, rugged unit capable of withstanding harsh operating environments. Each sensor is calibrated over its nominated temperature and pressure range using a thirty six-point calibration matrix across the entire operating temperature range. This process provides error correction of an order of magnitude, of up to 50% better than traditional technologies and provides the user with accurate and stable calibration.

The Greenspan PS2100 includes a low power sleep mode to conserve battery power providing the user with increased times between field service resulting in a lower cost of ownership. Easy to use software programs (Smartcom and Aquagraph) are supplied with the sensor. These enable the user to set up the optimum logging profiles for monitoring with respect to their application and graphical analysis

Applications of use/operating specifications
The Greenspan Technology PS2100 is designed for use as a water depth/level measurement and data recording instrument.
Although the major application area for deployment is in bore holes for groundwater monitoring the sensor is also very suitable for surface water applications.

Get pdf PS2100 Logging Depth Sensor User Manual

KVM Drawer Model T1500 User Manual

KVM Drawer Model T1500 User Manual

Raritan’s KVM Drawer Model T1500 is the first in the industry to offer the convenience of using standard UTP cabling to connect servers up to 1,000 feet away. The KVM Drawer T1500 is a 1U 19” rack mount KVM console that can control a computer by an integration of a keyboard, a touchpad, and an LCD monitor, and can save up to 10 U of height space in your mounting rack.

The KVM Drawer T1500 enables quick and efficient access to servers and other network devices, as well as allowing you to manage the setup, administration, and maintenance of rackmount servers in data centers, server rooms, and other space-critical industrial environments.

Product Features
• 1U 19” rack mount KVM drawer that meets EIA RS-310C standard
• 15” Active-Matrix LCD Flat Panel Display Color Monitor
• Tempered glass protecting the LCD panel
• Compact design enabling the unit to be mounted in most cabinets
• Industrial grade ultra-low-profile compact keyboard with integrated touchpad

Installation
Before you begin, make sure that power to all devices you will be connecting has been turned off. To prevent damage to your KVM Drawer due to ground potential difference, make sure that all devices on the installation are properly grounded. Please consult your vendor for any technical issues if necessary or contact Raritan Technical Support at (732) 764-8886 or via email at support@raritan.com, Monday through Friday, 8:00am to 8:00pm, EST.

KVM Drawer Rack Mount Instructions
Before attaching pieces to your KVM Drawer, determine whether you will be using the short brackets with the two-grid sliders or the longer brackets with the four-grid sliders. Select the pieces according to the depth of the rack in which the unit will be mounted.

Get pdf KVM Drawer Model T1500 User Manual

D-Opto Dissolved Oxygen Sensor Operation Manual

D-Opto Dissolved Oxygen Sensor Operation Manual

The D-Opto is designed to measure dissolved oxygen concentrations in liquids; it uses field-proven solid-state optical sensing technology that is highly stable over long periods of time, even in harsh conditions. The D-Opto has extremely low power requirements, and outputs the data in SDI-12 format making it ideal for incorporation into remote environmental monitoring installations.

Optical Sensor Technology
Unlike conventional dissolved oxygen sensors, the D-Opto sensing element utilises fluorescence to measure dissolved oxygen. The basic principle involves subjecting a fluorescing compound (ruthenium) to a fixed wavelength of light. When the light source is removed, the compound emits a fluorescence, the intensity of which is dependent on the oxygen levels present in the surrounding water. An extremely stable electronic circuit has been designed to firstly excite the ruthenium, and then measure the intensity of the resulting fluorescence. Therefore using this circuitry, the D-Opto should provide accurate dissolved oxygen measurements over long periods of time (many months) without recalibration.

Unlike conventional polarographic dissolved oxygen sensors, the optical method does not consume oxygen. Consequently the measurement of dissolved oxygen by the D-Opto is unaffected by water movement. Similarly the D-Opto does not utilise a membrane or any other consumables, thus minimising the servicing requirements.

Get pdf D-Opto Dissolved Oxygen Sensor Operation Manual

Recovery Card User’s and Reference Manual

Recovery Card User’s and Reference Manual

Computer room managers will be familiar with problems like mis-operation or incorrect shutdown by users, illegal operations from Windows itself, viruses, and sometimes loss of data or files as a result of curiosity or even willingly damaging the software by the users. The Recovery Fast Recovery card can repair the computer system by simply rebooting the computer. The Recovery card can be instructed to automatically restore the system on a flexible regular time interval, or on every reboot.

All that has to be done is installing the Recovery card in the computer and specifying the data that has to be protected, and the data will be kept good forever. Not only the supervisor has an easier task because he does not have to restore the computers after misuse, he can even give the users more freedom because even if they format the hard disk, the Recovery card will restore the data after the computer has been rebooted. In case of a teaching environment students can learn how to operate for example a word processor, thereby modifying and saving files, and after a restart of the computer all the files used are fresh again for the next session.

Computer room management is also made easy when the computers are connected in a network. The Recovery card can co-operate with a network card to synchronize with another computer, this making management of a computer room as easy as management of a single computer.

Note: the Recovery card, of course, cannot protect the computer from hardware failure. It is therefore strongly advised to keep a back up of your important data at all time.

Get pdf Recovery Card User’s and Reference Manual

PMI-3000 series of industrial MMI panel PCs Manual

PMI-3000 series of industrial MMI panel PCs Manual

To fulfill customer satisfaction, we deeply concerned about quality, reliability, and cost. The PMI-3000 series are specially designed to keep normal operation under harsh environment which meet all the requirements for an industrial man-machine interface. They are very tiny, thin, light, and convenient to install.

They come equipped with a flat panel display which is 9.4” color DSTN LCD, an analog resistive touchscreen, an all-in-one 386 SBC, a universal 55W switching power supply (refer to appendix A for options), a space for a 2.5” HDD, etc. All of them are enclosed with a heavy-duty steel chassis and a high-quality plastic front panel which meet the NEMA 4/12 industrial and environmental protection standards.

All the controls and connectors are placed on the rear panel, you can connect the panel PCs to other devices via them.

NOTE
Touchscreen or DC power supply is optional as your order and to ask for additional price table.

The SBC contents a 386SX CPU with an on-board 2MB and up to 32MB, local-bus SVGA controller. Its features include four 16C550 RS-232C ports, one RS-232C port can be set RS-422/485 also, an enhanced IDE hard disk interface, a floppy disk interface, one 32-pin sockets, watchdog timer, and a 6-pin Mini-Din connector or 5 pin header for keyboard connector. Please refer to NOVA-300 user’s manual for more details about the SBC.

Get pdf PMI-3000 series of industrial MMI panel PCs Manual

DVR Reader – HDD Reading Software Operating Manual

DVR Reader – HDD Reading Software Operating Manual

Main idea of using DVR Reader is to view the images from DVR’s HDD on the PC. By simply taking out the HDD from DVR and placing the HDD into the PC, DVR Reader will automatically read the image from the HDD. The software also brings several features including saving image in AVI file, KPEG file or BMP file. KPEG file format is invented by our company engineers and its file size is 510% of AVI files. The main disadvantage of using the AVI file format were the file size as well as saving time. Printing and searching images are available with the software. Most of current users save the important materials in either moving or stationary image into CD by utilizing CD-writer.

Installing Software
You will find an installation CD from DVR. Please select DVR Readersetup.exe and run the file.
1) When you run the file, you will see below diagram on your monitor. Click Next to continue.
2) Click Next button again and next step is to select the installing directory. Please select where you want to install the software.
3) You can make the shortcut of the software. Please select the name of shortcut.
4) When you click Next button, it will ask you to confirm the directory and name of short cut. Click Next to start installation.
5) Installation is complete now and the software will be started when you click the Finish button.

Get pdf DVR Reader – HDD Reading Software Operating Manual

N200 External Harddisk User Manual

N200 External Harddisk User Manual

N-200 is the smallest & light integrated solution that provides external harddisk, card reader and memory card backup functions. As a portable external storage device, N-200 is a perfect choice for active mobile users providing a very light and optimal solution for personal information storage and transfer. Any PC with a USB port is enough for user to access documents, music, images, or any other data stored in the internal harddisk.

In addition, N-200 also acts as an all-in-one card reader supporting all major memory card types. Most importantly, N-200 enhances the mobile users by enabling them to copy the content of a memory card into the internal harddisk without any PC or notebook required. User can backup the memory card content with a touch of the button or erase the memory card with the touch of the button. N-200 allows the users to easily free up more expansive memory cards for re-use in the field.

N-200 supports Compact Flash (CF), MicroDrives, Secure Digital Card (SD), Multimedia Card (MMC), Memory Stick (MS), Memory Stick PRO/DUO, Picture Card (xD). N-200 hook to PC can be achieved using USB 2.0 High Speed (480Mbps) link.

N-200 comes equipped with an internal Li-polymer rechargeable battery. The battery can be charged either with an external DC adapter or via USB port when connect to the PC or notebook.

Get pdf N200 External Harddisk User Manual

VC-1 Encoder Installation and Operation

VC-1 Encoder Installation and Operation

Up to three VC-1 encoder boards may be housed in the 1RU frame and power supply. Connect the 25 ft. control cable between the appropriate card slot on the chassis, and the remote control panel, or PC (see VC-1 Windows Software), and apply power to the chassis. Control panel power is supplied via the control cable.

Connect program video to the “PGM IN” BNC. “PGM OUT 1” is equipped with a failsafe relay, which will connect the input to the output in the event of power failure. This output should feed the on-air link. “PGM OUT 2” is not bypassed and may be used for a monitor feed if required.

The control readout has a LINE row and a PRST (preset) row. The LINE row indicates the content rating on the outgoing program. The PRST row indicates the rating that has been preset from the control panel. On power up, the control panel will indicate PASS THRU in the LINE row and NO DATA in the PRST row. The PASS THRU function allows data previously inserted to pass through the VC-1. Whether control is via the remote panel or a PC, the VC-1 will strip and overwrite any existing XDS data once a rating has been inserted.

Any rating may be pre-selected by depressing the appropriate pushbutton. The button will illuminate and the content rating will appear in the PRST row of the readout. Depressing the TAKE pushbutton will transfer the rating to LINE, and the rating data will be inserted in the program output. The pushbutton will extinguish and NO DATA will appear in the PRST row. PASS THRU may also be pre-selected by depressing the PASS button, and taken to air by depressing the TAKE button. Should an incorrect rating be pre-selected:
1) For U.S. Rating System, depress CANCEL button and re-enter correct rating.
2) For Canadian Rating System, any rating may be overridden by entering another rating.

The VC-1 is equipped with three GPI functions:
1) GPI 1 requires a momentary contact closure. This closure will initiate the TAKE function. Whatever rating is in PRST will go to LINE.
2) GPI 2 requires a latching contact. When held low it will automatically put the VC-1 into the PASS THRU mode regardless of what is presently on LINE and PRST. When this GPI is allowed to go high, the rating selected in PRST will go to LINE.
3) GPI 3 also requires a latching contact. When held low it will automatically put the VC-1 into the PASS THRU mode regardless of what is presently on LINE and PRST. When this GPI is allowed to go high, the rating will revert to whatever was previously on LINE

Get pdf VC-1 Encoder Installation and Operation

U-Viewer USB Handhold Digital Microscope MS-01U User’s Manual

U-Viewer USB Handhold Digital Microscope MS-01U User’s Manual

The U-Viewer USB handhold digital microscope is an exciting new device that let’s you view clear many micro-objects with it，and has a wide scope of applications, such as,
• Industrial Inspection
• Computer Parts inspection
• Telecom module inspection
• Scientific teaching tool
• Medical analysis
• School Research tool
• Insect dissection / examination
• Plant dissection / examination
• Skin examination
• Textile Inspection
• Collections / Coin/ Jewelry Inspection
• Printing Inspection

The following instructions will guide you to through the process of installing the U-Viewer USB handhold digital microscope:
I. Power on PC and place installation CD into CD-ROM driver, do not connect USB Cable from U-Viewer Device to PC before software installation.
II. Select SOFTWARE–>APPLICATION, and follow the instructions to complete installation.
III. As driver installation completed, and if system asking for restarting, please restarting PC.
Note: The driver needs to be installed only once for each computer.

Get pdf U-Viewer USB Handhold Digital Microscope MS-01U User’s Manual

Prestigio P199 User’s Manual

Prestigio P199 User’s Manual

Please first check the following package content of the 19”LCD monitor.Contact your dealer or store where you purchased the LCD monitor if anything is missing.
1.19”TFT LCD Monitor
2. External Univ15 pin D-sub (RGB Analog) input signal cable *DVI. and Video are optional*
3. Power Cord
4. Audio Cable with Stereo Phone Jack
5.CD User’sManual
6. Quick Start Guide.

Warning
1. Make sure that the system power is turned off.
2. Plug the signal cable to the signal connector at the rear of PC.
3.Plug adapter output cable to the jack at the rear of LCD monitor and the power cordto the adapter.
4. Connect the power cord to power source.
5.Turn on the computer and the monitor.
6.For the best display quality,wesuggest that you set the resolution as shown on Display Mode page.

Cleaning Notes
1. Be gentle to clean the screen.
2. Never use any kind of corrosiveness chemical dissolvent to clean the screen, it may hurt your screen surface.
3. We suggest that a camel hair brush or a soft, lint-free cloth be used to clean the screen.
4.Don’t exert any pressure directly tothe LCD screen.

Precaution
1. Do not expose the monitor to direct sunlight or heat.
2. Do not spill liquid on the monitor.
3. Do not attempt to open the monitor.You may be hurt by electric shock.For service,call your place of purchase.
4. Do not use your monitor when magnets or electronic products are operating nearby.
5. Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen. Wipe it with clean, soft clothes applied with mild solution.
6.Do not place anything on your monitor.Bad ventilation may elevate temperature in the monitor.
7.Don’t use your fingers to touch the LCD screen,directly.Fingerprint contains oil and may be difficult to clean

Get pdf Prestigio P199 User’s Manual

AEL Digital Camera DC-132U User’s Manual

AEL Digital Camera DC-132U User’s Manual

AEL Digital Camera DC-132U equipped with the following features:
• Small size for easy carriage and convenience of use
• High resolution: 1280 X 960 pixels in digital camera mode
• Onboard 8 MB memory
• Mode selectable flash light
• Built-in self-timer
• Fixed focus
• Electronic shutter
• Easy recognizable LCD screen for camera and image handling
• USB interface for easy and quick connection to PC
• Automatic power-off system
• Operation modes:
Digital camera mode for taking photos PC camera mode for using the camera as an image capturing device for PC Video camera mode for capturing motion clips with a PC Sound recording mode for recording sound.

Installing batteries and strap
1. Open the battery door and insert four AAA alkaline batteries into the compartment.
2. Refer to the illustration below to install the strap.
3. Now you are ready to use your camera.

Installing Digital Camera Software
The CD that accompanies your camera contains the digital camera driver bundled with valuable image-editing software.
1. To install digital camera software:
Insert the utility CD into the CD-ROM drive. The software installation menu will appear automatically.
NOTE:
1. If the software installation menu does not automatically display, open Windows Explore and double-click the “Autorun.exe” icon in the CD-ROM directory.
2. If your Operating System is Windows XP, please feel comfortable to continue the installation process when the below dialog box appears on the screen. (In Windows 2000/NT, the same dialog box may also occur. Please feel comfortable to continue the installation process.

Get pdf AEL Digital Camera DC-132U User’s Manual

IP Power 9212 User Manual

IP Power 9212 User Manual

The IP Power 9212 is a Network Controller & Sensor with 8 DI & 8 DO. A specific PC or software is not needed; you can easily control devices remotely and check the device status via the Internet anywhere in the world.

Using a Browser such as Internet Explore or Netscape, you can securely access the unit. It includes 8 Digital Inputs, 8 Digital Relay Outputs and works like an IO Server. You can integrate it with Home / Office security, Personal entertainment, and Industrial field applications.

The API program is supported to help the integrator to easy program any software to integrate with existing application systems in local computers. The IP POWER 9212 can be flexibly applied to Home entertainment & industry security & systems with integrated management.

Feature︰
1. Embedded web server – no need to connect to a PC – Use Ethernet or Internet (LAN / WAN)
2. Accessible with popular web browsers- IE (Internet Explore) or Netscape – DO NOT need specific S/W.
3. Comes with 8DI & 8DO: Direct control relay output (DO) and detects digital input (DI) 8 Set Sensor – Default 4 Set Source mode (Voltage Input) and 4 Set Sink mode (Resistance Input). 8 Set Controllers – Default 4 Set NO - Normal Open & 4 Sets NC - Normal Close
4. Network protocols supported: HTTP, DHCP, Virtual and Dynamic IP.
5. Security code identification and Hardware reset function.
6. Easy installation, setup and support with online upgrade.
7. Individual LED indicates switch-working status.
8. Safe, durable, non-electric leakage and anti-farmable design.
9. Polar protection – will even connect contrary port .
10. Digital inputs provide de-bouncing function.
11. Update firmware by the TCP/IP network.
12. SDK (Software Development Kits) provided.
13. Embedded “ WATCH DOG “ ,
14. Compatible with OUR IP Kamera 9000, IP Video 9100 and IP Power 9201E(IP Sensor) for monitoring, control, and detection via any online PC.
15. Support GPRS – setting by for online Cell phone ( item limit) .
16. Support SMTP : Send IP address by E-mail as log in and send e-mail as detecting sensor trigger.

Get pdf IP Power 9212 User Manual

PL512 Modular Power Supply System Technical Manual

PL512 Modular Power Supply System Technical Manual

The only purpose of this manual is a description of the product. It must not be interpreted as a declaration of conformity for this product including the product and software. W-I e-Ne-R revises this product and manual without notice. Differences of the description in manual and product are possible.

W-Ie-Ne-R excludes completely any liability for loss of profits, loss of business, loss of use or data, interrupt of business, or for indirect, special incidental, or consequential damages of any kind, even if W-I e-Ne-R has been advises of the possibility of such damages arising from any defect or error in this manual or product.

Any use of the product which may influence health of human beings requires the express written permission of W-I e-Ne-R.
Products mentioned in this manual are mentioned for identification purposes only. Product names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies.

No part of this product, including the product and the software may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means with the express written permission of W-I e-Ne-R.

Control Cabinet
In the context of this user manual, the control cabinet must fulfill the requirements on fire-protective enclosures according to EN 60950 / IEC 60950 / UL 60950.
All devices are intended for operation in control cabinets or in closed areas. The LAN connection and all wire connections between the different system parts must be done via shielded cable with conductive connector shells, which are fixed with screws. Furthermore, an additional fire-protective enclosure is required which must not affect proper air circulation.

Get pdf PL512 Modular Power Supply System Technical Manual

Downloading DryCal Data to a PC Supplement Manual

Downloading DryCal Data to a PC Supplement Manual

The DryCal DC-1 and the DryCal DC-Lite can both download data to a PC spreadsheet, such as Excel or Lotus, by using a parallel-to-serial converter kit and following the instructions below. The DryCal DC-2, Nexus and ML-500 do not require a converter kit, as they both have a built-in RS-232 interface for direct download to a PC. Bios International does not offer technical support on serial port configuration. For assistance on serial port configuration and other Windows questions, please contact Microsoft TM Windows support.

Requirements
• Parallel to Serial Converter Kit (DC-1 and DC-Lite only)
• A Microsoft Windows PC equipped with an open COM Port
• Appropriate Interface Cable(s)
• Please see your IT professional for assistance in finding an open COM port if necessary.

Setting up a Windows HyperTerminal File for DryCal
1 In Windows, select Start|Programs|Accessories|Communications|Hyperterminal|Hypertrm to display the Connection Description dialog box.
2 In the Name box, type a name for the connection.
3 Click OK to display the Connect To dialog box.

Get pdf Downloading DryCal Data to a PC Supplement Manual

3 Port IEEE 1394a PCMCIA Card RC602 User Manual

3 Port IEEE 1394a PCMCIA Card RC602 User Manual

Features and Benefits
VIA VT6306 chipset
Compliant IEEE 1394-1995, 1394a (rev. 1.1) and OHCI Interface Specification 1.0
PCMCIA CardBus Interface with Power Management
Hot-swapping features allows you to connect/disconnect devices without powering down your system
Supports data transfer rates of 100, 200 and 400 Mbps
Built-in power jack for optional power supply
Provides three 1394a (6-pin) port for multiple 1394b/1394a devices connections
Works with various types of 1394a devices including portable hard disk, DV camcorder, digital camera,
CD-RW/DVD-ROM drive and other audio/video devices

Bus Interface
32-bit PCMCIA Type II

Connectors
3 x external IEEE 1394a 6-pin connectors

Hardware Installation
General instructions for installing the card are provided below. Since the design of system may vary, refer to your system’s reference manual for further information, if needed.
Power off your notebook computer.
Insert the 3-Port IEEE 1394 CardBus Adapter into the Type II PC Card slot of your notebook computer. Make sure it is inserted all the way in for a solid connection. Power on your notebook computer.

Driver Installation
Windows 98, 98SE, ME, 2000 and XP 32/64 & MAC OS 8.6, Vista 32/64, Linux will automatically detect and install the correct driver for the 3-Port IEEE 1394 CardBus Adapter. Make sure that the driver has been installed correctly, right click My Computer, then click Manage, click Device Manager. The Device Manager window opens. Scroll to the IEEE 1394 Bus host controller icon and click on the plus symbol, the VIA OHCI Compliant IEEE 1394 Host Controller should be displayed.

Get pdf 3 Port IEEE 1394a PCMCIA Card RC602 User Manual

SMT351 User Manual

SMT351 User Manual

the SMT351 card is a TIM format memory module that is able to store up to 1GB of data at 400MB/s. The module works in a similar way than a FIFO memory. The first data stored into module will be available in output. SMT351 modules can be cascaded to extend storage capability.

The module is based on DDR SDRAM memory components running at up to 133 MHz. DDR (Double Data Rate) SDRAM activates the data outputs on both the rising and falling edges of the system clock rather than on just the rising edge, potentially doubling the output.

A Xilinx Virtex-II Pro FPGA (or XC2VP20, or XC2VP30) controls input and output data flows on two Sundance High-speed Bus (SHB) connectors. This bus is compatible with a wide range of Sundance processor, converter and I/O modules.

Get pdf SMT351 User Manual

Frank Control Computer System Owner’s Hardware Service Manual

Frank Control Computer System Owner’s Hardware Service Manual

You made an excellent choice for performance, reliability, and value. Your Frank Control Computer System uses a high performance Z80 CPU and 8085 CPU. An 8051 micro controller is used to read in all the digital temperatures; freeing time for the main processors to do more important things. The Frank Control Computer System talks to a PC to allow for a user-friendly control interface. It also talks to an Allen Bradley PLC that handles all the I/O’s. Here are some of the professional features of your new Frank Control Computer System.

Features
♦ Up to 48 Isolated Digital Temperatures per Kiln
♦ Easy Temperature Probe Replacement
♦ Control up to 5 Kilns per System
♦ Triple Processor Computer System
♦ Battery Back Up and Real Time Clock
♦ Power Fail Monitor and Watchdog Timer
♦ RS232 communication to Allen Bradley PLC
-80 inputs, 32 outputs, and 32 analog outputs
♦ RS232 communication to PC

Note: Components included depend on the Kilns needs. All components and connections are defined in the Operating instructions of this manual.
- 110-Volt / 220-Volt Power Supply Board
- Programmable Data-Acquisition Temperature Board (DAQT)
- Bulb Connection Board
- Eprom Card
- CPU Card

Get pdf Frank Control Computer System Owner’s Hardware Service Manual

KL-43100 PALM Modem-Charger Product Manual

KL-43100 PALM Modem-Charger Product Manual

The Kestrelink KL-43100 Palm Modem is designed to provide phone line data connectivity to Palm devices with the Palm Multi-Connector (M-C). This product is ideal for distributed data collection systems that are designed for nightly data synchronization. The modem also provides charging power to the Palm.

Features
• Up to 56K (V90) baud standard analog phone line communication
• Provides 500mA charge current to the Palm device
• Has power, charging and communication link status LED indicators.
• Audio dialing and connection progress status provided
• Phone jack located on the back for phone set connection
• Replaceable phone cord is semi-permanently attached for easy setup
• Replaceable Palm M-C cable to minimize long term maintenance costs

Typical Application
The typical application is to locate the modem near a phone jack and power source. The Palm device is then connected and disconnected with the short M-C cable. LED status indicators in the M-C housing indicate charging and communication status. A phone may be connected to the back of the modem so that separate RJ-11 cable splitter is not necessary.

Get pdf KL-43100 PALM Modem-Charger Product Manual

PC-Linq USB Cable User’s Manual

PC-Linq USB Cable User’s Manual

The PC-Linq USB cable is your fast solution to peer-to-peer file transfer between two computers via the USB port. The PC-Linq cable provides true plug-n-play capability while transferring files at much greater speed than traditional file transfer products via serial or parallel port, more than 6M bits/sec can be achieved. In most applications, the user will get greater than 4M bits/sec of smooth file transfer rate. The PC-Linq application program, a Windows Program Manager-like user interface, provides a very easy to use environment that makes file transfer as easy as drag-and-drop. You simply plug in the PC-Linq cable and do a one-time installation of the program.

Features
The PC-Linq USB cable provides the following features:
• Single chip (ASIC) USB host to host communication
• High-speed data transfer rate from 6Mbps
• Single cable solution for data communication
• Windows 95 and 98 Support
• Easy drag-n-drop file transfer
• Includes print function for remote files
• Includes power management and remote wake-up functions
• Compliant with USB specification 1.1

Driver & PC-Linq Program Installation
Follow the steps below on installing the PC-Linq USB cable and program for the first time:
1. Power on both computers where you will connect the PC-Linq cable and make sure that the USB port is enabled and working properly.
2. Plug in the USB cable into the USB port and Windows will detect an unknown device and run the Add New Hardware Wizard to assist you in setting up the new device.
3. Insert the PC-Linq USB cable driver diskette into the floppy drive and click Next to continue.
4. Select Search for the best driver for your device and click Next.
5. Select Floppy disk drives and click OK.
6. Windows will detect the driver (usbbc.inf) and shows the USB Bridge Cable. Click NEXT to continue installation.
7. Then the PC-Linq Setup program will start to begin program installation.
8. Follow the instructions on every dialog box to finish the installation.
9. After installation is complete, a shortcut of the PC-Linq program will be placed on your Windows desktop

Get pdf PC-Linq USB Cable User’s Manual

G540 4-AXIS Drive User Manual Rev I

G540 4-AXIS Drive User Manual Rev I

Thank you for choosing to purchase the G540 4-Axis Drive system. If you are dissatisfied with it for any reason at all within two weeks of its purchase date, you may return it for a full refund provided it is cosmetically unmarred and undamaged electrically in any way. Otherwise Geckodrive Inc. fully warranties it against workmanship defects for 1 year after its purchase date.

The G540 is very easy to use. All it requires is:
1) MOTORS: One to four step motors are required. All NEMA-17, many NEMA-23 and a few NEMA-34 motors are acceptable. The motors preferably should be square in cross-section, not round. The motors can be 4, 6 or 8-wire motors. 5-wire motors cannot be used with the G540. Choose a motor that has a rated current of 3.5A or less. Choose a motor that has a rated winding inductance of 2.5mH to 3mH if maximum power output (>100W mechanical) is a requirement. Never use a power supply voltage greater than 32 times the square-root of the motor inductance expressed in milli-Henries (mH).
2) MOTOR CABLES: The motors connect to the G540 via male DB9 connectors. The four motor wires connect to pins 6 and 7 for one motor winding, pins 8 and 9 for the other motor winding. The current set resistor connects to pins 1 and 5. The motor cable should be a 4-conductor cable and it can be shielded or unshielded. If a shielded cable is used, connect the shield to either pin 2, 3 or 4. Pins 2, 3 and 4 connect to ground inside the G540.
3) CURRENT SET RESISTORS: The current set resistor programs the axis drive current (0 to 3.5A) to match the rated phase current of the motor being used with the axis. Each axis requires a current set resistor. The resistor can be from 1/10 W to 1/2 W in size and 1% to 5% tolerance. The current set equals 1,000 Ohms per Amp of motor current. Example: A 3.3A per phase motor requires a 3.3K resistor, a 1.5A per phase motor requires a 1.5K resistor.
4) POWER SUPPLY: Connect a DC power supply to the MAIN TERMINAL BLOCK, the positive supply wire to Pos 11 and the negative (ground return) wire to Pos 12. The power supply voltage must be between +18VDC and +50VDC. The power supply voltage determines how fast your motors can go. Supply voltage has no effect on the motor’s low-speed torque. The power supply can be regulated or unregulated. The power supply current will depend on the number of motors used and the motors rated phase currents. The power supply current also depends on motor speed and applied load. A rule of thumb estimate is add up all the motor phase currents and multiply the result by 0.6 to get the required power supply current.
5) PARALLEL PORT CABLE: Use a parallel port cable to connect the G540 to the PC. The G540 end of the cable must be a male DB25 connector.

Get pdf G540 4-AXIS Drive User Manual Rev I

MagicJumBO series Model: DD-9000PCM PCMCIA duplicator Operating Manual

MagicJumBO series Model: DD-9000PCM PCMCIA duplicator Operating Manual

This operation manual will show you how to use the MagicJumBO series PCMCIA duplicator. It includes the basic information regarding the product’s features and the step-by-step procedures for using the MagicJumBO series PCMCIA duplicator. Please read this manual thoroughly to fully understand how to use this product and to avoid any mistakes.

All users of the MagicJumBO series PCMCIA duplicator must note that the machine is designed for fast and easy operation for legal duplications. You should not pirate or illegally duplicate materials on the DD-9000PCM unless you have the owner’s permission to do so. Wytron Technology Co., Ltd. assumes no responsibility for how the MagicJumBO series PCMCIA duplicator is used. All brand names mentioned in this operation manual are trademarks or registered trademarks of their respective owners.

Features
1. One slot for the master PCMCIA disc and eleven slots for target PCMCIA discs.
2. Stand-alone operation, meaning no other equipment is needed.
3. Simultaneously duplicates every target.
4. It is compatible with many operating systems, such as Windows 95/98/ME, Windows NT/2000/XP, MS-DOS, IBM-DOS, IBM OS/2 Warp, NEC, etc.
5. Max. bus transfer rate as high as 4GB/min.
6. Power auto-control. No output when operation terminated.
7. There are a variety of functions to suit your needs, such as COPY, COMPARE, COPY + COMPARE, etc.

Get pdf MagicJumBO series Model: DD-9000PCM PCMCIA duplicator Operating Manual

Sans Digital TowerRaid TR8U-B/TR8U User Manual

Sans Digital TowerRaid TR8U-B/TR8U User Manual

Thank you for choosing SANS DIGITAL TR8U-B/TR8U storage appliance. Using a revolutionary 8 bay design, it creates a versatile USB storage box that will fulfill you never-ending storage need.

Please read the precautions carefully before you using SANS DIGITAL TR8U-B/TR8U storage appliance. Ensure that you use the product correctly according to the procedure described in this guide.

The following safety precautions are intended to remind you to operate the product safely and correctly. Please read and ensure that you understand them before you proceed to the other sections of this guide.
• Do not attempt to disassemble or alter any part of the product that is not describe in this guide.
• Do not allow the product to come into contact with water or other liquids. In the event that water or other liquids enter the interior, immediately unplug the product from the computer. Continued use of the product may result in fire or electrical shock. Please consult your product distributor or the closest support center.
• Do not handle the product near a heat source or expose them to direct flame or heat.
• Never place the product in close to equipment generating storage electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt data.
• Windows 3.x/ 95/ 98SE/ ME/ NT is not supported
• Please be noted the following product is not supported:
Toshiba DynaBook, Satellite series (All K6 CPU models).
IBM Aptiva E series (All K6 CPU models).
Sotec E-note M260 series.
All AMD K6 system.
PC with sis7000/ 7001/ 7002 PCI to USB host controller.

FEATURES
• Eight 3.5-inch SATA hard disk drives to USB interface.
• Selectable USB mode: Hard Drives can combine (Spanning mode, 3 different kinds) or individually access (JBOD).
• Selectable Power mode: Auto Power Mode (Automatic On/Off with the computer) or Normal Power Mode (manual On/Off).
• Supports Plug & Play automatic system configuration.
• Supports USB high-speed (480 Mbps), and backward-compatibilies to full-speed (12 Mbps) data transfer modes.
• Supports Plug & Play for easy installation.
• Compact Enclosure with Dust-Free Cover.
• 300 watts power supply (90V to 264V).

Get pdf Sans Digital TowerRaid TR8U-B/TR8U User Manual

BS-2000 Wireless Communication Station User’s Manual

BS-2000 Wireless Communication Station User’s Manual

The BS-2000 Communication Station (Comm Station) is able to collect data from guard tour readers, then later upload to the PC via a USB connection.

Description of the BS-2000 hardware:
Status LED Lights
(in the descriptions below, “up” indicates the direction on the BS-2000 where the status LED lights are located):
Red LED – Upper-Left
Constant on: the BS-2000 has data that needs to be uploaded.
Constant off: the BS-2000 does not have data that needs to be uploaded.
Green LED – Lower-Left
Flashing once per second: the BS-2000 is operating normally.
Red LED – Upper-Right
Not used.
Blue LED – Lower-Right
Flashing once per second: the BS-2000 is operating normally.
Flashing quickly: the BS-2000 is communicating with a guard tour reader.
Audio Signals
There are two types of audio signals: long beep and short beep.
Some of the audio signals below have multiple meanings depending on the situation.
Short Beep (once)
Guard tour reader found, but the reader does not contain data that needs to be uploaded.
Short Beep (twice consecutively)
Guard tour reader found, and the reader contains data that needs to be uploaded.
Short Beep (three times consecutively)
The BS-2000’s memory is full, please upload to the BS-2000m first.
Long Beep (once)
Data transfer from the reader to the BS-2000 has been completed.
Long Beep (once) + Short Beep (three times)
The BS-2000 not operable and needs to be initialized by the manufacturer.
Power Supply
The BS-2000 is able to use multiple types of power supplies:
USB connection to the computer.
9V AC adapter.
Rechargeable battery.
Car adapter

The BS-2000 will turn on automatically after being connected to a power source. The status LED lights will start flashing at a normal pace if the unit is operating correctly. The rechargeable battery in the BS-2000 automatically recharges whenever an external power source is connected, including the 9V AC adapter, car adapter, and the USB connection.

Get pdf BS-2000 Wireless Communication Station User’s Manual

Box PC BPC-300-6122 User Manual

Box PC BPC-300-6122 User Manual

Box PC is targeted at many different application fields. By adopting Box PC, you can pinpoint specific markets, such as Thin Client, KIOSK, information booth, GSM Server, environment-critical and space-critical applications. Box PC is specially designed for 3.5″ and 5.25″ Miniboards. The modular design of the Box PC is prepared for any OEM projects. Modular Box PC can be easily modified to fit many different applications according to customers’ requests.

Compact-sized
The kernel of BPC-300-6122 is EmCORE-i612, which is a 3.5″ drive size embeded board.
The whole system consumes only a few space.

CRT SVGA
BPC-300-6122 can support super 2D video performance and consumes minimal power.

Advanced storage solution
BPC-300-6122 comes with Compact Flash & Mini PCI slots, which offer a better, faster and more cost-effective expansibilities for various applications.

Trustworthy
The onboard Watchdog Timer can invoke an NMI or system RESET when your application loses control over the system.

Get pdf Box PC BPC-300-6122 User Manual

PCM-3660/3661 PC/104 Ethernet Module and 10BASE-2 Tranceiver

PCM-3660/3661 PC/104 Ethernet Module and 10BASE-2 Tranceiver

The PCM-3660 is a high-performance 16-bit Ethernet interface module that attaches to the PC/104 connector on your CPU card or PC/104 CPU module. The module automatically senses whether it is connected to an 8-bit or 16-bit PC/104 system. The PCM-3660 fully complies with IEEE 802.3 10 Mbps CSMA/CD standards and is 100% Novell NE2000 compatible.

The module includes a built-in 10BASE-T transceiver and RJ-25 connector. An AUI connector supports external transceivers (MAU) for 10BASE-2, 10BASE-5 10BASE-FOIRL, etc. Two diagnostic LEDs indicate the operating status of the module and the network.

The PCM-3661 5-V 10BASE-2 tranceiver daughterboard connects to the PCM-3660’s AUI connector. It supports IEEE 802.3, allowing connections of up to 185 m with thin coaxial cable. The daughterboard requires only 5-V input power. Surge protection circuits prevent damage from high voltages or currents on the cable.

The PCM-3660 comes with drivers for a wide variety of networks and operating systems. An optional boot ROM lets you boot a remote PC/104 station automatically from a server, making hard or floppy disks unnecessary.

Get pdf PCM-3660/3661 PC/104 Ethernet Module and 10BASE-2 Tranceiver

22Mbps Wireless Network PC Card User Manual

22Mbps Wireless Network PC Card User Manual

The 22Mbps Wireless PC Card delivers enhanced IEEE 802.11b high performance for up to 22Mbps, which is double of that offered by most of the current wireless products in the market. The 22Mbps high data rate is made possible by the latest advanced TI wireless technology, which incorporates the new PBCC modulation method.

Unlike the ordinary CCK modulation, not only the new PBCC modulation method offers double data rate for up to 22Mbps, but also it gives 20% more distance coverage. The 22Mbps Wireless PC Card is fully compatible with other 11Mbps wireless devices. The simple step-by-step installation allows you to have the wireless network setup in no time. The comprehensive configuration utility makes the setting control for the

PC Card easier than ever.
The 22Mbps Wireless PC Card is an ideal wireless device that truly makes the idea of “wireless” come true. Please take a moment to read through this manual and get acquainted with this cutting-edge product.

Product Features
Fully compatible with IEEE 802.11b standard for wireless.
Interoperatable with existing IEEE 802.11b standard devices.
Supports new data modulation PBCC technology from Text Instrument, which enables high data with double speed of up to 22Mbps.
20% more transmitting and receiving coverage supported by PBCC modulation.
4X mode enhancing the transmission speed to over 12Mbps throughput.
Supports auto data rate fallback under noisy environment or longer distance.
Enhanced security with WEP encryption from 64, 128 to the maximum of 256 bits.
Supports SiteSurvey function with profile.
Supports Roaming function to allow you to roam between different AP coverage areas.
Easy setup and installation with Install Wizard

Get pdf 22Mbps Wireless Network PC Card User Manual

FDI PCA9633 DEMO Board User Manual

FDI PCA9633 DEMO Board User Manual

The PCA9633 Demo Board demonstrates the Philips PCA9633 Fast Mode Plus 4-bit I²C LED Dimmer IC. Four LEDs are connected to the PCA9633 and through individual pulse width modulation (PWM) of each LED show different levels of intensity. To use, push SW8 to the ON position. The LEDs will immediately flash and glow. To select a different mode of operation, press the MODE button (PB1). The LED will flash amber a number of times to denote which mode was entered. Use the other 3 buttons (SELECT, PLUS, & MINUS) to change the settings. Six different modes of operation are provided and described below.

Bus SDA & SCL Pull-up Enable
These two switches disable/enable the cable-side pull-ups for the I²C-bus. These switches must be ON for the MASTER Board (0) and the LAST SLAVE board in the chain. All other boards in-between should have these switches set to OFF. If there are only two boards connected (MASTER and SLAVE), both boards should have these switches set to ON.

Cable Power Off/On
This switch enables the battery power connection to the RJ45 cable on pin 1 of the RJ45 jack. This allows a single power source for the complete chain of boards when all the boards have this switch ON. Note: When this is utilized, a single bench or wall power supply should be used, as the typical 9V battery cannot supply enough current to power multiple boards. The 9V battery should be removed from the holder on all boards. The input power requirements are: 6VDC to 12VDC, 100mA per board MAX.

Board Power Off/On
This switch turns power OFF/ON for the board. Board Power should be turned OFF whenever the board is not in use, as the battery drain would result in a dead battery. It is also recommended to remove the battery from the board when not in use to avoid inadvertent battery drain if the OFF/ON switch is bumped ON. The battery may be placed in the holder with the contacts “away” from each other as a storage method.

Get pdf FDI PCA9633 DEMO Board User Manual

QuickTrace 1.2.0 Manual

QuickTrace 1.2.0 Manual

QuickTrace is a tool used for determining and digitizing original data from cartesian, ternary or polar plots. To capture the presentations either a digitizing tablet, or a bitmap graphic, e.g. from scanned plots, is required. If possible, use a big monitor in high resolution (17 inch or more). The output of the computed single data is made by an ASCII file or graphically as vector-based PICT file.

System requirements
A Macintosh with MacOS 7.5 or higher, at least 8 MB RAM, better 16 MB RAM, and, if possible, a colour monitor with 17 - 21 inch, is required. QuickTrace needs 2.3 MB RAM in minimum. It should be set higher, if scanned graphics in high resolution are used.

All Mac OS-systems older than 8.0 require the extension ‘Appearance Extension’as well as the con sole ‘Appearance CDEV’, which is available for downloading (name: ‘Appearance Lib’). Both 68K or PowerPC Macs are supported by different versions of QuickTrace. The software was developed in the Visual Interactive Programming BASIC-environment of Main- stay. The code was converted to ANSI-C and compiled by CodeWarrior

Get pdf QuickTrace 1.2.0 Manual

Combo Bluetooth Printer Adapter User’s Manual

Combo Bluetooth Printer Adapter User’s Manual

Thank you for your purchase of the X-Micro Combo Bluetooth Printer Adapter. Featuring Bluetooth wireless technology, X-Micro Combo Bluetooth Printer Adapter creates cable-free printing connections between your desktop PCs and your printers. X-Micro Combo Bluetooth Printer Adapter is compatible with all Bluetooth v1.1-certified devices and you can connect your computing devices and printers 100 meters away without cables in your working environments, such as home or office.

FEATURES
Compliant with Bluetooth standard version 1.1 .
Support for Microsoft Windows 98SE, ME, 2000 and XP.
Operating distance of up to 100 meters in free space.
Bluetooth Class I (20 dbm).
Support both USB and 1284 printer port interfaces.
Both SPP and HCRP print service profiles supported.
Easy operation and setting up.

SYSTEM REQUIREMENTS
PCs must have a Bluetooth device installed, such as a Bluetooth USB dongle. It allows you to communicate with X-Micro Combo Bluetooth Printer Adapter.
PCs must have a Bluetooth device driver installed. Furthermore, make sure the driver is of the latest revision which supports Bluetooth print service.
PCs can have different printer drivers installed, printer drivers such as HP, Epson, Canon…etc. You can install at least one before using X-Micro Combo Bluetooth Printer Adapter.
USB printer shall follow USB printer specification as downloadable from USB forum - http://www.usb.org. Some printers do not follow this specificaton and can not be used.

Get pdf Combo Bluetooth Printer Adapter User’s Manual

Industrial Rack-mount LCD KVM Drawer User Manual

Industrial Rack-mount LCD KVM Drawer User Manual

Integrating a Keyboard, Touchpad, 17’’ LCD panel and a KVM switch in a 1U housing, the industrial solution provides high efficiency in server management. For further convenience and flexibility, the SK5858BM and SK595BM LCD KVM Drawer also support an external set of keyboard, monitor, and mouse console that allows user to access the computers locally from the rack or remotely by IP KVM or Cat5 KVM Extender.

Operation of the Drawer
1. Opening the console
Step 1: Pull the drawer out to an appropriate position and the drawer will automatically lock as you pull it over its safety position
Step : Open the LCD cover, then you should be able to operate . Closing the console
Step 1: Close the cover of LCD
Step 2 : If this drawer is in its locking position, please use your finger to pull the white block (see below yellow circle) on both sides of the drawer to release lock mechanism, and push the drawer into the cabinet entirely.

Get pdf Industrial Rack-mount LCD KVM Drawer User Manual

IP Indoor IR Bullet Camera ACM-1310 series Hardware User’s Manual

IP Indoor IR Bullet Camera ACM-1310 series Hardware User’s Manual

This IP device is a cutting-edge digital video transmission device. It can compress and transmit real time images with outstanding images quality (D1, 720×480) at reasonable bandwidth through a standard TCP/IP network. That is because it is Ethernet ready and has the powerful ARM9 SoC and the MPEG-4 compression ASIC inside. In addition, with these powerful hardware platform, excellent SDK support and powerful respective apparatuses (e.g. the transcoder), this IP device is your best choice building up either conventional IP surveillance system or intelligent IP surveillance system.

Real-time MPEG-4 Compression
With hardware MPEG-4 compression chip inside, the composite video inputs can be efficiently compressed into MPEG-4 bit stream without any delay. The ASIC base compression engine can support not only CIF, but also FULL D1 image resolution.

Digital Time Code Embedded
The “Digital Time Code Embedded” function is to embed the recording time in the MPEG bit stream. Therefore, each image frame has its respective time when it was recorded. It is very useful when users want to find the video at an exact time or between a certain time intervals.

DDNS Supported
This IP device supports DDNS (Dynamic Domain Name Server), users can set this IP device at a virtual domain name (such as cam1.Taipei.xxx) at dynamic IP. Everyone can use the virtual domain name to view the video anywhere that has the access to the internet.

Build-in Hardware Motion Detection
No more external motion sensors are required. Each IP device can be set up to 3 detection areas. By tuning the object size and sensitivity, it is very reliable to fit into your environment. Besides, hardware motion detection delivers better sensitivity and responds faster than software motion detection.

Get pdf IP Indoor IR Bullet Camera ACM-1310 series Hardware User’s Manual

Planar LCD Monitor PT1503Z Manual

Planar LCD Monitor PT1503Z Manual

This manual is designed to assist you in setting up and using your New Planar LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the con- tents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.

Your New Planar LCD Monitor has been designed to be versatile, ergonomic and user-friendly. Your New Planar LCD Monitor is capable of displaying most standards, from 640 x 480 VGA to 1024 x 768 XGA. The digital controls located on the front panel allow the user to easily adjust the Monitor’s display parameters. Your New Planar LCD Monitor’s small footprint allows you more room in your workspace for other peripherals. Lightweight and compact, your New Planar LCD Monitor is the perfect solution for users on the go. You can use your New Planar LCD Monitor for everything from making business presentations to playing computer games. The two stereo speakers allow you to further expand your computer’s multimedia capabilities by connecting your computer’s Audio out port to your New Planar LCD Monitor’s Audio in port. If you have a complete full workstation, your New Planar LCD Monitor has the additional feature of an optional wall-mountable stand for added convenience.

The architecture of your New Planar LCD Monitor incorporates an LCD panel that produces a clear display with low radiation emission, limiting health concerns. With its low power consumption, your New Planar LCD Monitor helps you reduce your power bill

Get pdf Planar LCD Monitor PT1503Z Manual

PowerAmplifier User Manual

PowerAmplifier User Manual

This power amplifier can be mast mounted using the stainless steel U-bolts as shown in Figure 5 and Figure 6. Refer to the sketch for proper positioning. Carefully tighten the bolts using the included nuts. Take care not to over-tighten the bolts or cause damage to the RF connectors on the amplifier. Because the amplifier is a sealed unit, these connectors can not easily be repaired. This unit can also be mounted to a flat surface using any of the mounting holes on the unit’s mounting flanges.

Radio transmitters, receivers and RF cables require protection when attracted by lightning strike.

The surge protectors contain fast response gas filled arrestors to provide low let through voltage for fast rise time transients. The device is configured to minimize circuit capacitance and the performance can be assured up to 2GHz. Standard models provide protection for receivers and transmitters up to a 1KW power level. Installing this device in outdoor may be subject to lightning strikes. To properly protect your equipment, you should install the lightning arrestor to prevent an electrical surge from traveling through the antenna cable and into the building. Lightning protection for a building is more forgiving than protection of electrical devices. A building can withstand up to 100,000 volts, but electrical equipment may be damaged by just a few volts.

Direct earth grounding of the antenna and the Lightning Protector is necessary to protect the installation from lightning and the build-up of static electricity. The ground terminal is located on the lightning protector that attached with this unit. Connect one end of the grounding cable to the Ground terminal and the other end to a good ground connection.

Get pdf PowerAmplifier User Manual

FocusTV PCI TV Card User Manual

FocusTV PCI TV Card User Manual

FocusTV PCI TV Card is a TV video watching & recording device design for all the new generation that enjoys the video world. The latest chip tech. for video processing not only provides highly video performance but support CATV/VHF/UHF full channel, external resource inputs (composite, S-video, and other AV equipments).FocusTV PCI TV Card concentrates on watching & Recording TV only, all saved efforts to put into video quality and performance instead to chaos useless functions. FocusTV built to enjoy TV life, built to focus on TV screen only.

System Requirement
CPU:
MPEG-1 Real-time Recording: Pentium-III 800 CPU or above
MPEG-2 Real-time Recording: Pentium-III 1.6G CPU or above
An available PCI 2.1 slot
Sound Card
Microsoft Windows 98SE / ME / 2000 /XP
640 x 480 display card(16-bit color)
128MB Ram
CD-ROM (for installation)
Hard disk(at least 10 Mb)
DirectX 8.1 or above

Caution:
Please not install the TV Card hardware without power off your computer; it might damage your computer and the TV Card. When the PC is running, you can’t touch the inside of your PC include the 6800 TV Card and the other device inside your PC.

Get pdf FocusTV PCI TV Card User Manual

Digital Video/Audio and Serial I/O Extender User’s Manual for the M5-2C2

Digital Video/Audio and Serial I/O Extender User’s Manual for the M5-2C2

M5-2C2-TR offers integrated extension of digital video, audio and RS-232 interface up to 50m (160ft) for HDMI/DVI. It maintains HD video signals up to WUXGA (1920×1200) at 60Hz refresh rate for PC and 1080p for HDTV. It is compatible with full DDC2B and HDCP. It supports connecting one of 3 different audio types in the transmitter; RCA, PDIF (Optic) or SPDIF (Coaxial) and outputting all 3 audio types. RS232 serial interface offers device-to-device and device-to-controller connections to build up control system for A/V integration. It is designed to multiplex and de-multiplex the DVI/HDMI video, digital/analog audio, Display Data Channel (DDC) command interface, High Definition Copy Protection (HDCP) and serial protocol so as to be linked over two CAT5 cables. It gives benefits of easy plug-and-go installation and offers you a cost effective solution for pro A/V system.

Shipping Group of M5-2C2 Digital Video/Audio and RS232 Extender
Tx and Rx boxes: One Uplink module & One Downlink module.
AC/DC power adapter: One +12V/3A unit (including AC cord).
User’s Manual
Option: DVI to HDMI cable, DVI cable, Dsub cable, Audio cable.

Hardware requirements
You have a graphic controller card with a DVI port in your Windows/Mac (Mac is option), or SUN system. It should support the maximum graphic resolution feature of the display to be connected.

In case of using a computer, no special memory size, CPU speed and chipsets are required. Proper initial trial of the entire platform with its application using a short length copper cable is recommended prior to install with the optical link.

Software requirements
No special needs, if the DVI graphic controller and display peripheral are operational with the platform’s OS and application

Get pdf Digital Video/Audio and Serial I/O Extender User’s Manual for the M5-2C2

SATEL I-LINK PC Point-To-Multipoint Program User Guide

SATEL I-LINK PC Point-To-Multipoint Program User Guide

SATEL I-LINK PC is a Point-to-Multipoint program, that can be used to drive several SATEL I-LINK 100 slaves connected to SATELLINE Radio Modems. The maximum number of slaves is 16. The program makes it possible to operate systems which are connected to the I/O -ports, to change values, monitor the radio link and Multipoint operation etc.

SATELLINE RADIO MODEM AND SATEL I-LINK 100 CONFIGURATIONS
BAUD RATE
Set the baud rate of the SATELLINE Radio Modem. Check that the other parameters are “N-8-1”.
Set the baud rate of the SATEL I-LINK100 by using the BAUD DIP -switches. 00=2.4, 10=4.8, 01=9.6, 11=19.2 (check that the SATELLINE Radio Modems have the same settings).
PROTOCOL
Set the SATEL I-LINK 100 PRTCL switch to the Multipoint position, P-to-MP.
ADDRESS
Set personal addresses to all SATEL I-LINK 100 sSlaves by using the ADDRESS DIP - switches.
CONNECTIONS
Before connecting the device to a power supply, first connect all inputs and outputs. There is more information about connections at the end of the manual.

START
Open the SATEL I-LINK PC program
OPERATION WINDOW
Open a new operation window from the toolbar list by clicking the -button on the upper left corner, or Open by clicking on the File Menu, opening “New Slave”. Open your own window to all slaves. Note that the maximum number of slaves in this program is 16. Arrange the display by using the Windows Menu or the -buttons.

COM PORT
Open the COM- port from the toolbar list by clicking “Master Config” and select “Open ComPort”. Set the same parameters as you have set for the SATELLINE Radio Modem and SATEL I-LINK 100, then press OK. If there are no COM -port settings, the program will automatically ask for them.

SLAVE ADDRESS
When the new Slave is opened, the program will automatically set the address for it. To make manual adjustments, click anywhere on the empty table using the right mouse button, and select “Set slave address”. Insert the new address, and then press OK.

Get pdf SATEL I-LINK PC Point-To-Multipoint Program User Guide