HUXSCOPE-UE Fiber Optic Microscope/Inspector User Manual
HUXSCOPE-UE TM is very usefully device to inspect ferrule in field. You can use it to inspect the connector installed inside hardware device and capture the image to your computer..
AVAIABLE APPLICATIONS
▪ Fiber Optic System / Sub-system with Fiber Networks
▪ Fiber Optic Module included Transceivers
▪ Test Equipment and Distribution Patch Panels
▪ Fiber Optic Components like Attenuators, Inside Adaptors
PRODUCT SETUP
1. Install first Hardware/Driver and then Software (refer to installation manual enclosed).
2. Connect Handset to Computer USB and Control the display size.
3. Cange Tip : The handset basically was assembled by SC/FC/PC Female Tip. If you want to change Tip to others, it could be changed by screw easily. Please keep clean lens in Handset when removing and changing the Tip. The lens is important to get clean images. So we recommend you should be careful.
4. Insert the tip into adaptor or female side of fiber optic devices. You can feel reaching edge of the adaptor. To get clean images, you have to rotate 360° FOCUS.
5. Capture Image to the computer.
Get pdf HUXSCOPE-UE Fiber Optic Microscope/Inspector User Manual
