M3LR RTD Transmitter Instruction Manual
This manual describes the necessary points of caution when you use this product, including installation, connection and basic maintenance procedures. The M3LR with Option /A is programmable using the PC configurator software. For detailed information on the PC configuration, refer to the M3CON instruction manual.
HOW TO OPEN THE COVER WHEN SETTING DIP SW
Hold at the top and bottom of the unit as shown below and slide the housing cover gently to open until it hits the latching inside the unit. INSTRUCTION MANUAL MODEL M3LR RTD TRANSMITTER (field- and PC-configurable) Specification Label (side) Body SW Setting Label
• Housing Cover Fully Opened
Caution: Handle the cover carefully to protect internal components from damage.
DO NOT pull beyond where the housing cover is latched. The plastic housing may be damaged.
HOW TO SEPARATE THE TERMINAL BLOCKS
When you need to separate the terminal blocks from the transmitter body for wiring, insert a minus driver between the terminal block and the housing body, pull up the driver and pull out the terminal block.
Get pdf M3LR RTD Transmitter Instruction Manual
