Binocular Spotting Scope Instruction Manual
Your Sightron SIIWP2060X63 Spotting Scope
Before using your new spotting scope we suggest you take a minute to check each accessory and learn its function. Your scope includes the following:
1. 20-60x zoom eyepiece (Mounted)
2. 25x wide angle eyepiece
3. Protective Scope case
4. Front and rear dust covers
Sightron produces several variations of spotting scopes. Since many people purchase a product via mail order it is also a good idea to check your scope to make sure you have received the model you ordered and it indeed the correct product you wanted. Note: Most Dealers are willing to exchange a spotting scope that has not been mounted if it is not used. However, after using your scope is not the time to notice your scope is not the correct model
Removing And Installing Eyepieces
Your new SIIWP2060X63 spotting scope will have the 20-60X eyepiece installed as it comes from the factory. This eyepiece will provide the best performance for viewing targets at the range and other viewing where the making the target or object larger is the main concern. To replace the zoom eye-piece with the 25x Wide Angle eyepiece, loosen the eyepiece mounting ring by rotating it in a counter clockwise direction as shown in Figure 2. To install either eyepiece simply rotate the eyepiece mounting ring in a clockwise position until tight. (Note: only use the hand to tighten the mounting ring as only a snug fit is required.)
Get pdf Binocular Spotting Scope Instruction Manual
