Digital View Finder User’s Manual
The Zigview S2 is a digital view finder that has a CCD image sensor and a color TFT LCD attached. It allows users to take a variety of pictures easily by providing real-time images of view finder information of SLR(Single Lens Reflex) camera. Before using Zigview S2, please read carefully the instructions so as to be fully aware of features of the product.
Testing Zigview
You can test this product before installing it on a camera. You can check whether images are properly displayed on the LCD screen, and whether the product can be operated as instructed in this manual.
Before Using This Product
Load a battery pack into the camera to fully charge it.
1. Detach the battery cover.
2. Pay attention to the plus and minus sides before installing battery on the product.
3. Attach carefully the battery cover on the product.
4. Wrong installing may cause permanent damage on the product.
Charge the battery fully with the provided battery charger after opening the package.
1. After inserting the battery, connect the AC adapter tightly to the main body.
2. It takes about 2 hours to fully charge the battery, this may vary depending on charging conditions. Time is increased if the product is turned on during charging.
3. The charging lamp lights red during charging, a full charge the light is green.
4. Remember to connect the adapter to the main body tightly. Incomplete connection may disturb the charging process.
5. Disconnect the adapter from the main body after changing battery.
Get pdf Digital View Finder User’s Manual
