Finger Lakes Instrumentation ProLine MicroLine Camera Guide

Finger Lakes Instrumentation ProLine MicroLine Camera Guide

Assembling and Powering-up your Camera System
Please bring together all parts. Make certain that during assembly the camera shutter cover stays in place to avoid damage to the metal iris. Only remove the cover when you are ready to connect the camera to your telescope. Please connect the various system components as follows:
1. Attach the USB cable to your ProLine or MicroLine camera.
2. Attach the USB cable to your PC.
3. Plug in the 12 volt power supply 4-pin “DC Power Jack” connector into your camera.
4. Plug in the ProLine or MicroLine power supply unit into a wall socket or switched AC power strip.
5. Ensure that the camera’s fans are running.

CAUTION:
Always plug your camera power cord into the camera “DC Power Jack” first, before applying AC power to the power supply. “Hot Plugging” the camera may result in a blown power supply fuse.
ProLine connections are side mounted
MicroLine connects are rear mounted
1. Attach the USB cable to your ProLine or MicroLine camera.
2. Attach the USB cable to your PC.
3. Plug in the 12 volt power supply 4-pin “DC Power Jack” connector into your camera.
4. Plug in the ProLine or MicroLine power supply unit into a wall socket or switched AC power strip.
5. Ensure that the camera’s fans are running.

Get pdf Finger Lakes Instrumentation ProLine MicroLine

Sprintwealth