MobileTSM User Guide
Getting Ready to Use MobileTSM
Bluetooth Setting
For the serial Bluetooth device (Promi), it needs to be charge so that it has the sufficient power to do your survey measurement. It is provide with its own power charger which you just need to plug in to the Bluetooth device. Remember also to check whether the communication between two Bluetooth is still connect or disconnect by navigate to My Bluetooth Places icon and search for the generic serial that you are using. The generic serial will tell you whether is disconnect or connected
Pairing a New Bluetooth Device
Before you start using a Bluetooth device, you need to pair up your Bluetooth devices; the USB Bluetooth (to be attached to the Tablet PC) between the serial Bluetooth attachment (to be attached to the total station). Pairing the devices allow you to avoid entering access information each time a connection is attempted. Paired devices share a unique link key, which they exchange each time they connect.
1. To start initiating your Bluetooth pairing, click on the
Start > Bluetooth Manager shown at above Note: Remember to plug in your USB Bluetooth into the Tablet PC and make sure the other Bluetooth device is ON before doing any pairing. The Bluetooth icon in your system tray will be in white colour once plugged in.
2. Click on the New menu > Connect!. A Connection Wizard screen will show up.
3. Click the Explore a Bluetooth device then click Next to continue the process.
4. A Bluetooth Connection Wizard: Explore a Bluetooth device screen will come out as follow. To select a device, tap inside the device selection box above.
5. After the list inside Bluetooth Browser screen appears as following, choose a device. Tap Next to continue or Back to return to the previous screen. To exit without completing the connection, tap Cancel.
Get pdf MobileTSM User Guide
