JTS-Rotator SPH Manual
JTS-Rotator SPH, produced by Esaypano, is designed for professional shooting of high quality image, including rotator and bracket. JTS-Rotator allows photographer to take sequential constant-angle shots around a single axis with the nodal point of camera and lens in line with the center of panoramic rotation. JTS-Rotator has several advantages in taking pictures:
Supports top and bottom images shooting;
Supports adjusting vertically and horizontally, fore-and-aft adjusting as well; Easy to carry about, with total weight of less than 1.5kg; Wear well again abrasion, made of alloyed material together with strong screws and accurate calibration; Not necessary to repeat calibration setup after you have made correct alignment of optical axis and nodal point
Structure of Rotator
Three jamming screws allow photographer to fix and rotate the rotator more easily with one for locking completely and other two for horizontal every 45 and 60 degree rotating respectively. A slight “click” will help photographer to know how many degree you have rotated without the need to look at the calibration while taking photos from different angles horizontally.
For example, if you don’t need to shoot image from different angles horizontally, please fix the screw “LOCK” only with other two loosening; if you want to get full circular or full frame image, you may need to tighten 60-degree jamming screw and loose the other two, one “click” saying 60 degree while two for 120 degree and three 180 degree; if you want to shoot drum image, 45-degree jamming screw will help you in the same way as 60-degree jamming screw.
The screw on the top of the rotator is used to fix the bracket, which is an indispensable part of JTS-Rotator SPH, and which is a critical part in shooting image successfully.
Get pdf JTS-Rotator SPH Manual
