PC 2000 Coil Inserter and Hand Punch Setup and Operator Manua
The PC 2000 plastic spiral inserter and hand punch will bind books up to 1-1/8” (28.6mm) thick using coil diameters from 3/16” (5mm) up to 1-1/4” (30mm). Any pitch coil can be inserted with this machine. Easily punches 12 sheets 20 lb. or 80 gsm bond at 4:1 or 5:1 pitch.
Power cord shall be certified for the country where the machine will be installed!
Please see Diagram 1 next page.
♦ Place the PC 2000 on a sturdy table at a good working height.
♦ Use two knobs and washers for each guide and table installed.
♦ Place the right side book guide (spare mandrel holder) (1) next to the drive wheel.
♦ Attach the book table / coil guide (2) to the front of the PC 2000.
♦ Place stop screw & spring (3) onto front of PC 2000.
♦ Use the large winged knob and washer to install the coil chute / mandrel holder (4) to side of PC 2000.
♦ Thread Motor handle (5) into motor mount.
♦ Plug one end of the power cord into the back of the PC 2000 and the other end into the wall outlet.
Get pdf PC 2000 Coil Inserter and Hand Punch Setup and Operator Manual
