Service Manual PDA Phone Product PRODIGY
This manual provides the technical information to support service activities of PDA phone (Prodigy). This document contains highly confidential information, any or all of this document should not be revealed to any third party.
Main unit Regulatory label (Stick on the keypad housing of main unit) Here is an example only. Actually printing format is depended on customer’s request. Repair center need to re-print new regulatory label once replacing M/B for new IMEI, As to printing format, please refer to returned unit from end user.
Disassembling
Tools needed of Assembling and Disassembling Prodigy
From left to right in the picture
1. Lens Cleaning Tissue.
2. Philip Screw Driver #0.
3. Torex Screw Driver T5X40
4. Special Made Plastic Stick.
5. Tweezers.
Remove the Stylus, mini-SD Card slot Filler, and protection rubber of antenna connector. Next, Remove the battery cover by releasing lock switch.
Remove battery cover
Warning: To reduce risk of fire or burns, do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. Replace only with specified batteries. Recycle or dispose of used batteries properly
Remove main battery from unit
Use the plastic stick to Insert and gently twist into the gap between keypad housing and antenna cover.
Unlock the inside hook.
Get pdf Service Manual PDA Phone Product PRODIGY
