Eclipse Fujitsu Ten GPS Navigation AVN5510 Owners Manual pdf
The present location and the vehicle direction are displayed. 7 Scale display The reduction scale of the map being displayed is indicated. The length of the 8 GPS mark This mark will appear when utilizing the absolute positioning data from the GPS satellite. • See page 16 for information concerning this mark’s display. There may be misalignments depending on the satellite conditions. 9 Distance remaining display The distance from the present location to the destination is indicated.
• While route guidance is in progress, the distance calculated from the route now being taken to the destination is indicated. • When deviating from the set route, the distance to the destination in a straight line is indicated. • Refer to “Switching the required time/distance remaining display” on page 96 for information on how to switch the remaining distance display. 0 Required time display/destination direction mark The following marks appear depending on the situation. ? Required time display While route guidance is in progress, the required time up to the destination is indicated. • Refer to “Setting the required time display” on page 89 for information concerning the required time. ? Destination direction mark When deviating from the set route, the direction towards the destination is displayed. A Cursor mark This mark is indicated on the map retrieved by a search or by scrolling. To scroll, simply touch the map (on a spot other than the touch switches on the screen). B Cursor position name display The name of the cursor position on the map is displayed (approx. 6 seconds). Except for some parts describing certain functions, this manual uses normal north-up map screen illustrations to describe the device’s functions. “Map touched” appears signifying that the map was directly touched (on spots other than touch switches). appearing in the screen above represents 300ft.
Get Eclipse Fujitsu Ten GPS Navigation AVN5510 Owners Manual pdf
