Errata Sheet for HP OpenVMS Support of HP Integrity BL860c Server Blade
This document identifies important information that is required for HP OpenVMS support on the HP Integrity BL860c Server Blade. Read this document before booting your system. OpenVMS Version 8.3 plus the patch kits listed in the next section provide support for the following features:
Server Blade System (all processor speeds)
C7000 enclosure and HP Onboard Administrator
Three PCI-e mezzanine I/O slots plus core I/O
HP intends to introduce other features (such as provisioning, WBEM providers, USB DVD, and vMedia) as part of the next version of OpenVMS.
How to Install HP OpenVMS Version 8.3 on Your HP Integrity BL860c Server Blade
This document explains how to install OpenVMS Version 8.3 on an HP Integrity BL860c Server Blade.
Prerequisites
To install OpenVMS Version 8.3 for Integrity servers (I64) on your Integrity BL860c Server Blade, you need:
• A non-production OpenVMS for Integrity servers (I64) system running OpenVMS I64 Version 8.2-1 or later that includes a spare, initialized disk. This system will be used as the boot server and must be configured with enough memory and suitable system parameter settings to allow such utilities as ESS$LAD_STARTUP, BOOTP, and TFTP to run successfully. It will be unavailable to users for the time required to perform steps preparing for the installation of OpenVMS I64 on your Integrity BL860c Server Blade. The spare disk will be set up as an InfoServer service drive; it will be booted remotely to install OpenVMS I64 on your Integrity BL860c Server Blade.
• OpenVMS Version 8.3 for Integrity servers Operating Environment (OE) DVD, part number 5013-6799. The OE DVD will be used on the boot server. The system’s DVD reader may be either an IDE DVD (such as DQA0) or a USB DVD (such as DNA0).
Get pdf Errata Sheet for HP OpenVMS Support of HP Integrity BL860c Server Blade
