HP Server Mount Kit AB292A for 19 in. 2-Post Rack Installation Instructions
This manual provides installation instructions for server mount kit AB292A. This kit is intended for use with the hp Integrity cx2600 server, and includes the following:
• Chassis Tray (Base)
• Two Rack Brackets
• Cable Management Strain Relief Bar
• Mounting Hardware (screws, washers, and nuts)
Mounting Options
The server chassis can be mounted with the chassis front at the rack columns, or with the chassis centered between the rack columns. The front-mount option facilitates alignment of the chassis front panel with those of other items in the rack. (The tray provides adequate support to prevent unbalancing the rack or stressing the columns.) The center-mount option provides improved weight distribution for those installations where columns are already stressed.
The mounting holes in the chassis rack ears, together with the holes in the tray (base) and rack columns (approximately 1/4-inch centers) allow adjustment of the server mounting position, up to the practical limits of weight distribution. The server is supported in the tray (base) and held in position by eight screws (provided).
Get pdf HP Server Mount Kit AB292A for 19 in. 2-Post Rack Installation Instructions
