Free Gadget Manuals: 01/31/10

TENDO Weightlifting Analyzer User Manual

Do you want to know more how you weight train? Let TENDO Sports Machines introduce you a new training tool for weight training. You will need the following items to use
completely TENDO Weightlifting Analyzer:
- Microcomputer system TENDO Weightlifting
Analyzer
- USB
Interface V-206 or Net Interface V-104
- Interface power supply adapter (regulated adapter DC voltage 12V, 800-1000mA) –Net
Interface V-104, only
- Cable to connect Interface to microcomputer (Interface MC Cable)
- Cable to connect Interface to computer (Interface PC Cable, USB Serial Adapter for Net Interface V-104, only )
- TENDO Weightlifting Analyzer CD (software)

Installing TENDO Weightlifting Analyzer software
- Insert CD in your PC CD-ROM drive
- Select My Computer and select the CD drive
- Follow the instructions given on screen to complete the installation
- When the installation is complete, a new program called TENDO Weightlifting Analyzer is added to your system. Also an icon will be placed on your computer desktop

Get pdf TENDO Weightlifting Analyzer User Manual

M3-ATX 6-24V Intelligent ATX Power Supply Installation Guide

Please take a moment and read this manual before you install the M3-ATX in your vehicle. Often times, rushing into installing the unit can result in serious damage to your M3-ATX board, computer and probably your car’s electrical system. Always double check the polarity of your wires with a voltmeter. Avoid using the cigarette plug as a power source, often times the contacts are not capable of delivering high current to your PC.

The M3-ATX was designed to work with a wide variety of main boards such as the VIA mini-ITX motherboards as well as Pentium-M / Celeron or full power Pentium systems

Power Input Connectors (right side)
Red
Battery + (positeive, un-switched battery)
Black
Battery - (negative)
White
Ignition (switched battery, positive. Can test by connecting it to Battery +)
Power Output Connectors (left side)
Hard drive wire harness (HDD, SATA-HDD, Floppy)
ON/OFF and THUMP wire harness (connects to M3-ATX pin header)
-ON/OFF wire harness (red/back) to connect to motherboard’s ON/OFF pin headers.
-THUMP (white) to connect to amplifier remote ON/OFF connector.
Wire harness for motherboard ON/OFF switch and Thump control (optional)
Wire harness for serial connection.
IMPORTANT: Always use the “Hibernate” feature on your PC, never use “Standby”.
P0: In this mode, the M3-ATX behaves like a regular ATX power supply
P1: Sends ON pulse to motherboard when ignition is ON for more than 2 seconds, sends OFF pulse to motherboard 5 seconds after ignition is turned off. Waits another 1 minute and then shuts down 5VSB to conserve battery. In this mode, the M3-ATX consumes less than 0.5mA. This is our recommended setting.
P2: Sends ON pulse to motherboard when ignition is ON for more than 2 seconds, sends OFF pulse to motherboard 60 seconds after ignition is turned off. Waits another 5 minutes and then shuts down 5VSB to conserve battery.
P3: Sends ON pulse to motherboard when ignition is ON for more than 2 seconds, sends OFF pulse to motherboard 30 minutes after ignition is turned off. Waits another 2 hours and then shuts down 5VSB to conserve battery.
P4: Can be set to any value. Setting can be done via an optional serial cable. (Default values for P4 are Off-delay=30sec, Hard-off=30sec)

Get pdf M3-ATX 6-24V Intelligent ATX Power Supply Installation Guide

Classroom Control System Manual

This manual explains the configuration and use of the Room Control SYSTEM and its components. It includes instructions for the start-up, use, and shut down of all system components. In the event that changes to the delivered configuration are made, amendments to this manual can be found posted to the back of this document.

Congratulations on your new Presentation System. The system installed in the Smathers Library contains state-of-the-art electronic presentation components. This system has been designed to provide you with capabilities to present an audio/visual presentation using the latest in electronic presentation technology. The presenter is given a host of display and audio options, including the playing of VHS, DVD, and CD-ROM media, and the use of a computer for PowerPoint or other lecture presentations.

The room contains all commercial off-the-shelf products, assembled to create an interactive presentation system. The PRESENTATION SYSTEM is equipped with a Presentation laptop PC, a DVD/VCR unit, and miscellaneous switching, audio and processing equipment. A Button controller provides the ability to control the projector, screen and media sources. The room is configured with one ceiling-mounted LCD projector for presenting lecture media.

This user manual assumes the following:
• The user is familiar with the Button Control user interface, including proper startup and shutdown techniques
• The user is at least mildly familiar with the use of consumer level audio/visual products such as VCRs and CD/DVD players

This manual covers all aspects of the operation of the systems at the Smathers Library. However, it does not describe in detail the operation of each individual component. For detailed instruction on each component, it is suggested that the user refer to the delivered manufacturer’s documentation.

Get pdf Classroom Control System Manual

Slim Size PC Mini Desk Top PC Socket 478 model User Manual

This manual is suitable for both MFII-865GV Slim Size PC and MFIII-865G/GV Mini Desk Top PC. The motherboard is all-in-one designed with 4 x AGP VGA,Audio sound and 10/100/1000 Mbit Network chip build-in. This motherboard is designed for both MFII-865GV Slim Size PC and MFIII-865G/GV Mini Desk Top PC with the new desined for Intel Socket 478 CPU for the Prescott Intel Pentium 4 CPU and Celeron D CPU.

The difference between MFII-865GV Slim Size PC and MFIII-865G/GV Mini Desk
Top PC are listed in the following:
Case size different
MFII-865GV Case Size: 33cm(L) x 32cm(W) x 8cm(H)
MFIII-865G/GV Case Size: 33cm(L) x 32cm(W) x 11cm(H)
Riser card different
MFII-865GV Riser card: 2 x PCI slots ( standard )
a. 1 x PCI/ISA slot mixed ( optional )
MFIII-865GV Riser card: 4 x PCI slots ( standard )
a. 3 x PCI/ISA slots mixed ( optional )
MFIII-865G Riser card: 2 x PCI + 1 x AGP slots ( standard )
a. 4 x PCI slots ( optional )
b. 3 x PCI/ISA slots mixed ( optional )
CD-ROM different
MFII-865GV CD-ROM: Slim type CD-ROM (Same as Notebook)
MFIII-865G/GV CD-ROM: 5 1/4” CD-ROM (Standard size)

Get pdf Slim Size PC Mini Desk Top PC Socket 478 model User Manual

OAS Power Teacher Manual

Users with the designation of “Power Teacher” will login to OAS using their unique Logon IDs and Passwords. A “Power Teacher” has access to all of the same functions as a teacher and many (but not all) of the same functions as a building administrator. For example, a Power Teacher can create new student accounts, can create and maintain classes, but cannot create new teacher/coordinator accounts.

From your Main Menu, you have four menu options:
The Students tab allows you to create and modify student accounts, and to review a student’s test playback.
The Classes tab allows you to create, modify, and delete a class (current and expired classes), assign tests to a class, delete test results, and to export test results into another application.
The Tests tab manages all the tasks required to create, modify, and delete your own tests, assign tests to students, score open-ended items, and print or preview tests.

The Reports tab houses all tasks related to student test results. From this page, you can view and print a variety of reports after selecting criteria such as class(es), test(s), and student(s).
In addition, from your Main Menu, you have the following links in the upper right-hand corner:
Help opens the help page that offers links to online user reference guides, quick start guides, software support, and enhancement requests.
Account Info displays your personal information so that you can change information as needed (including your password).
Logout closes the second browser and displays the original OAS Login Screen

Get pdf OAS Power Teacher Manual

PCM-3665 PC/104-Plus Dual Giga Ethernet LAN Module Startup Manual

The powerful, new PC/104-plus dual Giga Ethernet LAN module is designed to support the ever increasing number of network connected embedded products on the market. It can be applied to any size form factor CPU board by employing the PC/104-plus throughput connectors. The PCM-3665 can provide a single or dual ethernet configuration using combinations of Intel’s 82541PI ethernet chipsets (see ordering information below). The PCM-3665 provides full 32-bit performance, PCI bus capability and is in full compliance with IEEE 802.3u 100Base-T specifications and IEEE 802.3x Full Duplex Flow Control.The PCM-3665 is your off-the-shelf solution that can immediately provide one or two ethernet ports to your embedded system.

The PCM-3665 module includes a built-in 10 pin box header and RJ-45 connectors. Two diagnostic LEDs indicate the operating status of the module and the network. You can define LEDs according to the application. The PCM-3665 comes with drivers for a wide variety of networks and operating systems.

Get pdf PCM-3665 PC/104-Plus Dual Giga Ethernet LAN Module Startup Manual

ROHS Compliance Ultra Low Power GPS Bluetooth Receiver with Speed Camera Detector Functionality

The Bluetooth GPS receiver, a total solution of GPS Bluetooth wireless technology, is dedicated design for the user who is usually carries the portable device such as PDAs/smart phones all the time. It allows 22 hours continuous use with a single battery charge. It uses GPS technology to provide accurate warnings to fixed and mobile speed cameras in the road ahead. The unit also including some nice features, such as vibration sensor for power management and POI update, which are the unique benefits to the users.

Not only transmit satellite information to the PDA or smart phone via Bluetooth but also become a G-Mouse GPS receiver through a data cable to deliver satellite information to the device without Bluetooth interface.

Get pdf ROHS Compliance Ultra Low Power GPS Bluetooth Receiver with Speed Camera Detector Functionality

Development System MICRF505-MICRF620 User Manual

The development system provides hands-on experience with the MICRFXXX transceiver. The user can use the included firmware (the program used in the micro controller) and hardware, or make a new program and flash it into the micro controller. That is, the user can use the boards both to evaluate the MICRFXXX, and as an aid in the development of a radio communication system.

A separate PC program is available. Through this program, it is possible to set the programming word for the MICRFXXX (both the frequency dividers and the control bits can be set). This program is referred to as “RF TestBench”. Please observe: It is possible to read out the firmware version of the development boards via RF TestBench.

Main modes of operation of the development system:
• RF Test Modes. The user can test the RF properties of the transceiver. It is possible to transmit a 1010… pattern or a random pattern, transmit a carrier or to stay in receive mode, searching for a 1010… pattern. In addition, the user can select to bypass the MCU completely, and control the RF part via header pins.
• 2-way Link-Test Mode. In this mode of operation, one board is “Master” and another board is “Slave”. Messages (5 printable ascii characters) are transmitted back and forth between the two boards. This mode is useful when testing radio communication in different environments, testing antennas, testing encapsulation etc. 16-bit CRC is implemented. A LED (“LED1”) indicates link OK.
• Simple Byte Transfer Mode. In this mode, the user can enter a number of bytes into a development board. The board will then transmit the bytes. If no user-bytes are entered, the board will search for RF messages, and, if found, output the message to the user. 16-bit CRC is implemented (messages received through RF are only given to user if the CRC is OK). A 64-byte deep buffer is implemented for both RX and TX. Only 1 frequency is used.
• Advanced Byte Transfer Mode. In this mode of operation, one board is “Master” and another board is “Slave”. Operates like the “Simple Byte Transfer Mode”, except: When transmitting user data, the board will construct a frame by adding frame type, frame ID and sync info. Automatic frequency hopping is implemented. ARQ(Automatic Repeat reQuest), CRC and duplicate control are implemented as well. “Master” is responsible for maintaining the link (by transmitting “timestamps”). If “Slave” is reset or gets out of sync, it requests a “timestamp” from Master.

Get pdf Development System MICRF505-MICRF620 User Manual

LSU4 UEGO Operators Manual

The M&W Uego system uses a Universal Exhaust Gas Oxygen sensor and this works completely differently from a normal oxygen sensor you would find in your car. It allows precise measurement over a wide AFR range. UEGO sensor systems are used by all original equipment manufacturers for ECU mapping and are also widely used in motorsports including F1.

The microprocessor controlled M&W Uego controller features a fully linerized real time 0 to 5 volt analog output giving 10 to 20/1 air fuel ratio.

This simple scaling allows easy input into data acquisition systems and engine management systems. 12V operation with a cigarette lighter plug allows easy fitment for vehicle testing.

The RS232 port allows connection to IBM compatible computers and laptops with DOS, Windows 95/98/NT/2000/XP and PocketPC software available. The controller uses a true wide range Bosch LSU4 sensor which when used with the tail pipe probe adapter provides a very versatile tuning tool for engine mapping and diagnostic purposes.

The sensor uses a special pumping cell with gives a current output depending on the air fuel ratio. This is completely different to a “normal” oxygen sensor. The pumping cell design allows measurement of air fuel ratios over the whole range where as a “normal” oxygen sensor is only capable of measuring a small range either side of 14.7/1 air fuel ratio. Each wide range sensor is calibrated and supplied with a calibration chip which can be easily changed should a replacement sensor be required.

Note: the sensor contains a ceramic module and should not be subject to mechanical or thermal shock or it may be damaged

Get pdf LSU4 UEGO Operators Manual

BC-337 GPS Receiver with Compact Flash Interface User Manual

The BC-337 is a GPS receiver with Compact Flash type I interface and it has a built-in high sensitivity antenna for tracking signal. Based on the SiRF star III high performance GPS Chip Set with very high sensitivity (Tracking Sensitivity: -159 dBm), it has an extremely fast TTFF (Time To First Fix) capability at the low signal level. The BC-337 is well suited to system integration and users who use PDA or notebook PC. It satisfies a wide variety of applications, including car navigation, personal navigation of touring devices, tracking and marine navigation purpose. Users can simply plug it into a PDA or other type of handheld PC running with suitable mapping and routing software for navigation.

External Antenna
Basically, you don’t need external antenna to perform GPS positioning with BC-337; it already has a built-in antenna. The only condition that you need external antenna is when BC-337 unit can not “see” the sky, For instance, when you are in a car, or any environment that GPS signal is blocked, the external GPS antenna will help to receive better GPS signal.

Plug the external antenna with MMCX connector to the plug on BC-337. Place the magnetic external antenna on the roof of the car or the outdoor open-space, and make sure not to put it upside down. That is, the magnetic side is the bottom side, and the upper side must face to the sky in order to receive better signal.

Get pdf BC-337 GPS Receiver with Compact Flash Interface User Manual

SkyDECT User Manual

As a perfect solution for wireless VoIP, SkyDECT is the next generation USB VoIP adapter that allows the use of various VoIP applications, including Skype and many other popular VoIP softwares such as VoipBuster, VoipStunt, VoipCheap, VoipDiscount ,Internetcalls, NetAppel, and SparVoip, etc, to work with DECT phone (or other regular phones). It is such a smart companion for you that you can conveniently make or receive any calls, no matter ordinary calls or VoIP calls, on the same phone set！

SkyDECT brings you about the following benefits:
- Upgrade your phone to be a PSTN/VoIP Dual mode phone.
- Seamlessly integrated with Skype, VoipBuster, VoipStunt, VoipCheap, VoipDiscount, SparVoip, Internetcalls, and NetAppel, etc.
- Enjoy wireless VoIP if you have a DECT phone or another cordless phone
- The standby mode is on PSTN channel (It is necessary for emergency calls such as 911)
- Call Alert for PSTN incoming call when you are on a VoIP call.
- Call Hold allows you to handle VoIP calls and PSTN calls at the same time
- Intelligent Router for SkypeOut calls
- Speed-dial up to 99 contacts
- FSK Caller ID
- Auto reply with an instant message when you are unavailable

Get pdf SkyDECT User Manual

PV037/PV057 Installation manual

Among the automation control devices, PanelVisa series is a high function but cost effective Panel. Besides most basic functions, it supports drivers of most PLCs, invertors and temperature controllers on the market. It is not only equipped with standard compact plastic case, but also provides customized key types for users to design their favorite ones. PanelVisa satisfies many kinds of design, such as emergency buttons with various buttons. Thus, PV series can concur harsh environments to meet customers’ needs and welcome by tool machines, specified function machine designers.

How to install the HMI?
Put the HMI to the cut hole and sew the lock screws at the four assembling holes on the HMI with average strength form the rear side. Please do not sew too tight and without equational strength or it will damage the touch panel.

The operation of the Key Panel and Touch Panel
PV037, a kind of key panel equipped with a 3.7” 160(H)x80(V) resolution LCD display, a 22 keys membrane or an analog input touch panel, allows users to design various applications. If the touch panel is not fixed in a right position, set the DIP-SW1, SW2 and SW3 to off to execute the touch panel adjustment. Please adjust it while needed and do not do the unnecessary adjustment. The Key panel is equipped with 22 keys on the membrane. Those keys are some for numeric entry and some for programmable function keys. There are four function keys, which can be assigned with various functions in any screen from the software. The other 0-9 ten keys on the membrane provide numerical entering function. They can also be locked temporarily. Press ESC and ENT at the same time to lock the ten keys. To unlock, press ESC and ENT again. For double-key’s application, users can operate to press together ESC and F1F4 to act as a programmable function keys. The Panel will automatically judge the data format or up/down settings to complete the data input.

Get pdf PV037/PV057 Installation manual

RiverWatcher Program User Manual

The RiverWatcher is a counter for use in fish ladders, barrier dams or other places where fish swim through a restricted passage. Various versions are available, and the counter can be adapted to local conditions in each individual instance. The RiverWatcher consists of a Control Unit with software, a Scanner Unit with cables, solar-panel, batteries and a computer program for processing the data.

The Scanner Unit can be thought of as a gate that is placed in the fish ladder. It controls the emissions of infrared light beams from the light-emitting one side of the Scanner Unit and the signals from the receivers on the other side of the unit. When a fish swims through the Scanner Unit it interrupts the beams, the silhouette of the fish being used to count it and calculate its size. One cable runs between the Scanner plates, and there is one cable connecting the Scanner to the Control Unit. Data sent from the Scanner Unit to the Control Unit, which can then be transferred to a computer program, consist of: the height of the fish, the date and time it swam through the Scanner Unit, the temperature of the river, the results of a vision test which is carried out at regular intervals to check on the condition of the Scanner Unit’s light-emitting diodes and a silhouette image of every fish so the counting’s can be verified afterwards.

Get pdf RiverWatcher Program User Manual

Vocal Harmony and Effects Processor Owner’s Manual

Congratulations on your purchase of the Vocalist® Live 4. The Vocalist Live 4 is a breakthrough processor that automatically generates live multi-part vocal harmony by analyzing guitar chord progressions. Armed with patent pending musIQ™ Harmony Technology (which includes both musIQ note detection and musIQ harmony generation), the Vocalist Live 4 gives you accurate vocal harmonies even with complicated songs because only Vocalist Live tracks guitar chords, along with your voice.

The Vocalist® Live 4 Features
musIQ harmony technology One, two, three, or four voices of automatic harmony with selectable voicings (Unison, av3rd up or down, a 5th up or down, and an octave up or down), generated based on incoming music from your guitar, or a manually selected key and scale/modevSelection of lead voice effects (Preamp, Reverb, Echo/Delay, Compressor, EQ, modulationvand pitch effects)
Next-generation vocal pitch detection, pitch shifting, and humanization processing.
Built-in guitar tuner
Built-in microphone preamp
Stereo XLR balanced and /4” unbalanced line outputs
50 factory presets and 50 user (editable) presets
Expression pedal input for real-time control of most performance parameters
Guitar ground lift function
External /8” audio input for MP3 and CD players
Headphone output
+48V phantom power
24-bit/44. kHz audio quality
Included Items
Before you get started, please make sure that the following items have been included:
The Vocalist® Live 4
PS09 3B Power Supply
This owner’s manual
Warranty Card

The utmost care was taken while your Vocalist Live 4 was being manufactured. Everything should be included and in perfect working order. If anything is missing, contact the factory at once. Please help us become acquainted with you and your needs by completing your warranty card or registering online at www.digitech.com. It is your safeguard should a problem arise with your Vocalist Live 4.

Important safety tip: Always turn on amplifiers AFTER all other connections are made to the Vocalist Live 4 and AFTER the Vocalist Live 4 is powered up

Get pdf Vocal Harmony and Effects Processor Owner’s Manual

CAUC Series User’s Manual

Follow the steps below to successfully set up your Cavalry External Hard
Drive with your computer.
Step 1. Start your computer and wait for Windows to load completely.
Step 2. Connect the power adapter to the drive. (Fig. 1)
Then plug the power adapter into an electrical outlet
Step 3. Connect the square end of the USB cable to the hard drive. (Fig. 2)
Then connect the flat end of the USB cable to the USB port on your computer
Step 4. Turn the power switch on.
NOTE: Connect the USB cable to the drive before connecting the cable to the computer. To disconnect, remove the cable from the computer first.
Step 5. Installing drivers for the Cavalry External Hard Drive.
Windows 2000/XP/Vista
Plug-and-play. No device drivers or configuration required. The computer will detect the USB External Hard Drive as a new USB device and display messages on the bottom-right corner reading “USB Mass Storage Device Detected” and “Your new hardware is installed and ready to use.”
Windows 98/Me
1. Make sure Windows 98/Me is fully updated
2. Go to www.cavalrystorage.com/su_download.htm and click on “Windows 98 Driver” to download the driver. Extract the file.
3. Navigate the device manager.
4. Right-click on the yellow question mark indicating an unknown

Get pdf CAUC Series User’s Manual

ASEDrive IIIe MT Technical Reference Manual

ASEDrive IIIe MT is an intelligent motorized PC/SC smart card reader. ASEDrive IIIe MT provides full PC/SC functionality with automatic functionality of the motorized acceptor, without requiring further programming. In addition to the automatic operation, the motorized acceptor can be controlled manually and various peripherals can be utilized though simple PC/SC IOCTLs. The ASEDrive IIIe MT is micro controller based, and is utilizing easily upgradeable Flash memory.

STANDARD FEATURES
• Advanced smart card reader with standard PC/SC interface.
• Support of ISO7816 CPU cards, I2C and XI2C, 2-bus and 3-bus memory cards.
• Automatic and manual motorized acceptor operation.
• Support for up to 4 inputs and 2 relay outputs with IOCTLs.
• 3 Status LEDs on board.
• Front Card Gate.
• Motorized Transport
• USB and RS-232 Interfaces
• Flash upgradeable from the host PC.

SMART CARD READER
The ASEDrive IIIe MT includes a high performance, PC/SC compatible smart card reader supporting ISO7816 and EMV CPU cards and memory cards.
FRONT CARD GATE
Front Card Gate prevents coins, dust, moisture, and debris, from entering the unit – gate resists opening except when ISO-size card enters the unit.
MOTORIZED TRANSPORT
The Reader has a command-driven motorized transport. The transport keeps the card from the user during a transaction but returns the card when the transaction is completed.

Get pdf ASEDrive IIIe MT Technical Reference Manual

E94A 2–Port ExpressCard User’s Manual

The E94A is a 1394a/FireWire Host Adapter for Multimedia Application, which is specifically designed to plug into a desktop or laptop equipped with an ExpressCard slot. The E94A also provide 1394a/FireWire functionality to your legacy Windows, Linux or Mac machine with a simple ExpressCard 1394/FireWire adapter you plug into an available ExpressCard slot.

The E94A are two external 1394a/FireWire ports that can support dozens of 1394a/FireWire devices like video cameras, hard drives, and CDR-W devices and a single ExpressCard Port that will allow you to plug into a desktop or laptop equipped with ExpressCard slot . The E94A supports up to 63 devices chained together and multimedia isochronous application (Audio and video applications require a guaranteed isochronous delivery of data to prevent delayed or out-of-order frames. 1394a/FireWire did that, and did it better than USB 2.0).

Get pdf E94A 2–Port ExpressCard User’s Manual

Octave Shifter 2 Audio Unit User Manual

Audiowish is a young software company dedicated to developing high quality Audio Unit sound effects. Thanks to our enthusiasm and continued interest in providing robust tools for musicians, producers and sound engineers we’re able to offer exciting products at very low prices. Audiowish started in 2006 under the Forever For Now umbrella and became a dedicated effort in the third quarter of 2007.

Octave Shifter 2 is a real-time pitch shifting effect for Apple’s Audio Unit architecture. By leveraging existing technologies like CoreAudio, Altivec and SSE, Octave Shifter 2 offers a unique audio experience. Key features of the Audio Unit include:
• real-time, low latency processing for live performances
• high precision post-processing for studio quality results
• four full octaves of pitch adjustment
• continuous pitch change, enables automation of pitch parameter
Additionally, Octave Shifter 2 makes use of the industry standard generic Cocoa and Carbon graphical interface views for Audio Units offering a seamless integration into host applications like Logic (Pro), Garageband and AU Lab.

Get pdf Octave Shifter 2 Audio Unit User Manual

AnyBus-S Serial Download Adapter Hardware manual

The data and illustrations found in this document are not binding. We reserve the right to modify our products in line with our policy of continuous product development. The information in this document is subject to change without notice and should not be considered as a commitment by HMS Industrial Networks AB. HMS Industrial Networks AB assumes no responsibility for any errors that may appear in this document.

ANYBUS® is a registered trademark of HMS Industrial Networks AB. All other trademarks are the property of their respective holders.

RS-232 connection to the PC
The AnyBus Download Adapter is set to RS232 mode as default from factory and no setting is required. This is the way the Download Adapter is normally used when connecting to a PC. If the AnyBus Download Adapter has been configured to another setting the RS232 can be set by selecting RS232 on the selection switch B1=1-2, the setting of B2 is irrelevant. Refer to Figure 1 for correct setting for RS-232.

Get pdf AnyBus-S Serial Download Adapter Hardware manual

CAXT Series User’s Manual

We at Cavalry extend our sincere gratitude for your purchase of this product. We hope our dedication to delivering high quality products with excellent customer service will ensure your continued interest in our products. This manual will assist in the operation of the product. To optimize your experience with this product, we recommend reading this entire manual before usage. Please keep this manual for future reference.

Features
Plug-and-play for Mac OS v9.x and newer
USB 2.0 and eSATA interface
Pre-formatted in Mac OS X Extended
Exceptional heat dissipating ability
Hard drive activity LED
Nearly silent operation
Slim and lightweight stackable design
Designed for use with a Mac, formattable for use with a PC.

Setup Instructions
Follow the steps below to successfully set up your Cavalry External Hard
Drive with your computer.
Step 1. Start your computer and wait for the Mac OS to load completely.
Step 2. Connect the power adapter to the drive. (Fig.
1) Then plug the power adapter into an electrical outlet.

Get pdf CAXT Series User’s Manual

DVI Single Link Fiber Optic Extender over ONE Fiber Instructions Manual

The MultiDyne DVI-ONE Series lets your digital flat panel display extend up to 1,000 meters (3,300 feet) away from host by TMDS digital signal transmission with only 1(one) fiber.
The DVI-ONE supports the following:
• High Speed and long distance transmission by SC type Multi-mode 1(one) Fiber
• Self detecting function for EDID information
• Corresponding to T.M.D.S signal (Single link)
• The use of standard DVI plug and SC fiber connector.
• R, G, B and Clock signal is transmitted by 1(one) multimode optical fiber
• Maximum resolution WUXGA
• Optional external power supply (Automatic power switch is included.)

INSTALLATION
The product is composed of a transmitter and a receiver. The transmitter unit is imprinted with the designation “COMPUTER”. The receiver unit is imprinted with “MONITOR”. The COMPUTER unit should be connected to the PC computer or source DVI output port. The MONITOR unit should be connected to the DVI input port of digital display. The DVI-ONE COMPUTER and MONITOR units are to be used with Multimode fiber optic cable of 50/125 or 62.5/125um with one SC connector. Please see the picture below.

Get pdf DVI Single Link Fiber Optic Extender over ONE Fiber Instructions Manual

JM4 Sub-Controller LED full color lighting control system User Manual

The system can edit any desired program as you need, design lighting effect at will, download program promptly, run offline, transmit long distance signal (1.5m), RGB full color output control, high refresh frequency, each second can refresh maximum of 90 frames, change lighting smoothly, install easily and connect conveniently. It applies on various lighting decoration of city, scenery, road, bridge, building, entertainment area, outer door advertisement, and inside house lighting projects etc.

Before you use the LED full color lighting control system, in order to operate the system properly, please read this manual carefully.

Important Safety Information
The product uses ABS plastic outer case and flameproof PCB
1. Must be far away from flammable and explosive articles
2. Please use high quality of power supply, or it may cause controller to work wrongly and damage circuit
3. Be careful on waterproof protection

Get pdf JM4 Sub-Controller LED full color lighting control system User Manual

Escort 2 Instruction Manual

The Escort 2 with a single 2MB card installed allows you to increase the memory of your Amiga by a total of 2 megabytes. The 2MB will operate in configurations of .5, 1 or 2 megabytes using 256 x 1 dynamic RAM chips. The Escort 2 also has a second slot for future addition of cards that comply with the Amiga standard. For example, a 2MB upgrade installed in your Escort 2 will provide another 2 megabytes of memory for a total of 4 megabytes above the Amiga’s internal memory. In addition the Escort 2 provides an 86 pin bus pass through for additional expansion.

It is important to note that ALL Amiga products from Expansion Technologies conform to Amiga’s Auto -Configuration as well as Form Factor (Shape), guaranteeing compatibility with future Amiga releases.

Information about other Expansion Technologies products for the Amiga and the Escort 2 has been included in the shipping box.

Get pdf Escort 2 Instruction Manual

OKI Microline ML320/321 Troubleshooting Manual

This troubleshooting flow chart is created for the purpose of repairing the ML320/321 printed circuit board assemblies. Those who are engaged in the repair work are expected to have an adequate level of experience and ability.

The following tools are required for ordinary repair work in addition to generally used tools.
Osci I loscope
Approximately 100 MHz
Soldering iron
Any soldering iron available on the market (preferably with a pointed tip)
A special soldering iron
set can be used to work
more efficiently

Troubleshooting Items
One of the operating voltages is missing.
(1-1) There is no + 40V output
(1-2-) There is no + 8V output
(1-3) There is no + 5V output
(7) There is no 1 OV AC output
(1-5) There is no output
Only the power lamp is illuminated.
Printer alarm occurs,
(TQ
Internal CPU RAM error
(TJ ROM error
( 3 - 3 ) RAM error 0 3 4
Serial interface error
( 3-5 Spacing error

Printing wrong character or some characters are not printed.
Line feed malfunction.

Get pdf OKI Microline ML320/321 Troubleshooting Manual

GEM-2 Manual

The GEM-2 consists of a sensor housing (the “ski”), the electronics console, and WinGEM software. The standard accessories include a battery charger, carrying straps, a download cable, a brief field guide, and this manual. The WinGEM software runs on Windows-based PCs. When the GEM-2 is attached to a PC, WinGEM can control its operation. WinGEM is used to initially configure the sensor and to specify the frequencies to be used for a particular survey. WinGEM plots the acquired data to verify proper operation.

A common use of the GEM-2 involves walking with the unit along a predefined survey grid. After a survey is completed, the WinGEM software is used to download the data from the GEM-2 and store it in a file on the PC for analysis. Given the positions of the ends of the grid lines, WinGEM assigns an x-y position to each data point using “dead reckoning” or interpolation and creates a separate file containing positioned survey data.

A more flexible survey technique involves connecting a GPS unit to the GEM-2 console during data acquisition. The time and positioning data from the GPS is stored along with the GEM-2’s EM data. WinGEM uses the GPS data to assign an x-y position to each EM data point during the “export” function. The text file containing positioned survey data can be read by most spreadsheets and analysis programs.

Get pdf GEM-2 Manual

UHF Reader/writer with 1-2 antennas support Instructions Manual

RS232 port
It is used to communicate with PC
RS232 format : 8 data bits, 1 start bit , 1 stop bit , none-parity bit
Baud rate : 9600,19200,38400,57600 and 115200
RJ45 port
It is used to communicate with PC and network system
- use patch Ethernet cable if connect the reader with Hub
- use crossover Ethernet cable if connect the reader with PC

Tag operation – ISO18000-6B
• multi-tag identification : search all the tags in the reading range to read the 8 byte UID
• multi-tag reading: search all the tag in the reading range to read the 8byte data from the beginning of the defined address
• single tag writing: write one byte data on the defined tag’s address
• single tag Lock: lock up the data on the defined address to prevent over-written
• Query Single tag locking : Query the locking state of the defined address.

Tag operation - EPC GEN2 (ISO18000-6C)
• multi-tag identification: search all the tags in the reading range to read the EPC data (96 bits)
• Single tag initialization: Initial the EPC data length of the tag (normally 96 bits)
(For a new EPC G2 tag, it must be initialized and pre-programmed to be read.)
• Single tag writing: read the EPC data of the tag, 16 bits for each time.
• Single tag locking: lock the EPC data of the tag to prevent data over-written.

Reader Parameter Configuration
[1] connect the reader with PC through RS232 ,
[2] connect external antenna with the reader
[3] apply power and power on the reader
[4] Run config program from path:\\CONFIG\config.exe
[5] select the com port setting and click on “Connect”

Get pdf UHF Reader/writer with 1-2 antennas support Instructions Manual

KVM-1150-V5.0 User Manual

15” TFT LCD display Switch
There is no interface card or software to configure. Installation is as easy as connecting cables between the KVM-1150-1D/KVM-1150-8D/KVM-1150-16D and your computers. Operation is as simple as entering hot-key command and navigating through the user-friendly on-screen menu.

KVM-1150-8D/KVM-1150-16D switches 8/16 IBM-compatible computers and cascades down to 16 separate systems. The KVM-1150-8D/KVM-1150-16D is independent of the computer’s operating system.

PC Switch Button (PC8PC16 button)
For KVM-1150-8D/KVM-1150-16D switch with PC Switch Button, you can push one of the sixteen switch buttons to select which computer you want to monitor and control. You can also do the same selection from KVM OSD Menu as describe on OSD (On-Screen-Display) Operation later.

On-Screen Display (OSD) Menu
For KVM-1150-8D/KVM-1150-16D switch with two built-in OSDs control (KVM-1150-1D has not OSD function), you can name your computers, switch to a computer from a list, configure settings with easy-to-use menus, view the name of the selected computer on-screen with programmable time interval from KVM OSD Menu and adjust LCD monitor configurations from LCD OSD menu by pressing the push button. The OSD displays the system status throughout operation.

High Video Quality
KVM-1150-1D/KVM-1150-8D/KVM-1150-16D offer one console to display and control the computer that you connected. Advanced VGA circuit design guarantees smooth and flicker-free switching from one computer to the other with distance up to 100ft (30M) at external Console and PC sides.

High Performance Internal Monitor and Control Device
KVM switch offer 15” TFT LCD display, industrial level keyboard with numerical keypad, and heavy duty touch pad to easy monitor and control the computer that you connected. It can save more space of you room and bring more convenient to you. Of course, it can also save more money for you.

Get pdf KVM-1150-V5.0 User Manual

PC Engines WRAP router platform

WRAP is a small single board computer optimized for wireless access and network routing applications.
• National SC1100 CPU, 266 MHz 5×86 CPU, 16KB cache
• 2 or 3 Ethernet channels (National DP83816); 1 channel on WRAP.2B
• 2 or 1 miniPCI sockets for 802.11 wireless cards and other expansion
• 64 MB SDRAM, 64 bit wide for high memory bandwidth
• 128 KB flash for tinyBIOS system BIOS.
• CompactFlash header for user’s operating system and application
• 7 to 18V DC supply through DC jack or passive power over LAN 1 connector
• 1 serial port (DB9 male)
• Watchdog timer built into SC1100 CPU
• LM77 thermal monitor
• Header for I2C bus (can be used for front panel interface)
• Header for LPC bus (can be used for I/O expansion)
• 3 LEDs and 1 pushbutton switch, freely programmable.

OEM options
The following accessories are available:
• CompactFlash cards
• Power over Ethernet injector POE.1A
The following options can be configured for larger orders:
• DRAM size (32 MB, 64 MB, 128 MB)
• CPU speed (233 MHz, 266 MHz, future 300 MHz)
• 1 or 3 Ethernet channels (limit to 1 miniPCI if 3 Ethernet)
• 1 or 0 Serial ports
• Delete front panel LEDs and switch
• Custom BIOS adaptations as needed
• Full BIOS source can be licensed for adaptation by OEM
• USB port (no power over Ethernet, 5V DC supply only)
• Full custom board versions

Get pdf PC Engines WRAP router platform

i.Trek M7 Bluetooth GPS Receiver User Manual

Thank you for purchasing the Bluetooth GPS Receiver, i.Trek M7, a global positioning system receiver with Bluetooth wireless technology. i.Trek M7 is well suited to system integrations including PDA, smart phone, Tablet PC and Notebook PC with Bluetooth devices. It can satisfy a wide variety of applications such as PDA and smart phone navigation, automotive vehicle tracking, personal positioning and sporting. With the dimension of 72.2(L) x 46.5(W) x 20(H) mm and weight only 64.7g (w/ battery), i.Trek M7 is an ideal solution to carry along everywhere.

i.Trek M7’s rechargeable battery can save satellite information such as the status of the satellite signal, most recent location and the data and time of its last use. The low-power design has extended the operation time up to 15 hours and brought you the most convenient and longest usage of its kind. With the lead-free production process (starting Jan. 1, 2006), i.Trek M7 is the most environmentally friendly wireless GPS receiver in the market.

i.Trek M7 has distinguished features others don’t have. With our patent pending Smart Power Save Mechanism and Fuzzy Auto On/Off features, i.Trek M7 consumes 65% less power than other wireless GPS receivers, and can extend the operating time up to 15 hours.

Get pdf i.Trek M7 Bluetooth GPS Receiver User Manual

DFIS-BT Bluetooth-Data Transfer between FLARM / Volkslogger and PDA Instructions Manual

This module has been developed under practical considerations by glider pilots for glider pilots. The DFIS-BT is the first module that allows the integration of popular “standard components”, for example state-of- the-art PDAs, into the world of the conventional electronics in the gliding environment, without cable by using Bluetooth interface.

The DFIS-BT module comes with the following accessories:
• Manual
• Data cable to connect the DFIS-BT module with the FLARM / Volkslogger (approx. 30-cm length)

An additional accessory that is not included in the package but can be purchased is a combined cable connection of the DFIS-BT module with a PC / laptop and a power supply -by a 9 volt battery.

The DFIS-BT module transfers data between the FLARM / Volkslogger and the PDA, on which the cross-country flight program is running - using a radio connection instead of the traditionally used cable wiring. To this purpose, the Bluetooth Standard is used, which is commonly used in today’s mobile devices like PDAs and mobile phones.

The module is simply connected with the pre-manufactured cable to the FLARM/Volkslogger device. The power supply of the FLARM / Volkslogger powers the Bluetooth module as well. By turning on the FLARM / Volkslogger, the DFIS-BT module is therefore ready for use. All plugs in the DFIS-BT module and the FLARM / Volkslogger are compatible with each other. The connector pin assignment corresponds to the IGC standard which is also used by the FLARM / Volkslogger. To use the DFIS-BT functionality in the double seater, two modules can be concatenated (one after the other). In this configuration, each of the modules sends the FLARM / Volkslogger data to the PDA which is linked to the module via Bluetooth.

Get pdf DFIS-BT Bluetooth-Data Transfer between FLARM / Volkslogger and PDA Instructions Manual

MemoryVue 1210 Plus User Manual

Congratulations! You are the proud owner of a MemoryVue tm Digital Frame. Boasting high-quality image resolution the MemoryVue tm is the perfect product for displaying your favorite digital photos. With its ease of use and configuration, you can now display all your favorite pictures, even with background music, or video clips for everyone to see.

Features
High resolution 12.1” TFT display
Plays images in slideshow format
Plays MP3 audio
Plays MPEG Video
Plays Audio Slideshow
Built-in multi format card reader CF/MMC/SD/XD
Generous 256MB internal memory
USB Port for PC connection
USB Port for device connection – thumb drive, camera, etc

Setup
This function is used to setup operational parameters for personalization. Functions include Language, Slideshow management, Clock settings, Alarm settings, Startup control settings, Video Settings, Default settings. Use the Up/Down buttons to the desired control and use the Enter button to select. A second screen is displayed with the controls. Use the navigation buttons to the desired control. The Enter button will select the desired parameter.

Get pdf MemoryVue 1210 Plus User Manual

Internet-Enabled Digital Frame User Manual

This Internet-Enabled Digital Frame revolutionizes photo sharing and goes beyond just showing pictures. Integrated with Flickr and Google Calendar, the Digital Frame could show online album and remind Google Calendar events. Designed for life, it can also direct show latest worldwide weather report. Stylish and smart, the Digital Frame is perfect for your home and office.

Key Features:
- Dual use mode: for portable and desktop
- Display up-to-date worldwide weather report
- Flickr integration: display online albums without opening IE
- Google Calendar integration: event reminders
- Direct show pictures in local folder of PC
- Auto screen turn-off
- Slideshow mode in transition effects
- Multilanguage: English, Spanish, German, Italian and French
- Alarm clock

Start Your Internet-Enabled Digital Frame
Turning On/Off
Cold Start: For the initial use, switch the Power button to “ON” to turn on Digital Frame. Warm Start: When Power button being switched to ON, press and hold for 2 seconds to start the device. It’s recommended to turn on Digital Frame by warm Start Cold Close-down: Switch the Power button to “OFF”. It’s recommended not to cold close-down your Digital Frame unless it would not be in use for long period. (Refer to Note) Warm Close-down: press Menu button to access the SETUP menu; then refer to following instructions to finish setting.

Get pdf Internet-Enabled Digital Frame User Manual

PC Protector User’s Manual

When first set up, saved, or recovered, PC Protector™ uses only 5KB of hard disk; when running , it uses 1.33MB of hard disk at most. Dynamic Virtual Hard Disk Drive (DVHDD) is one created and managed by PC Protector™ in protected partitions for new data saving. Theoretically PC Protector™ supports a DVHDD of 1207GB, practically it supports a 12GB one, so it better supports Windows NT/2000/XP/2003 server and ensures that the Defrag routine can run and large data can be saved when any partition is protected.

The magic Save function is best suitable for such application environment about government, business, institute, home, finance, securities, accounting and the military. When any partition is protected, all writing on it will be recorded as new data. Once we use recovery or uninstall function, all new data will be cleaned. PC Protector™ provides Save function to write data onto hard disk.

Anti-Evil-Attack function is best suitable for cyber cafe and the computer labs of schools and colleges. When the attacker deletes all installation information on the protected partitions, and reboots the computer, PC Protector™ will enter a Security Check routine. OS can only be booted when the manager inputted the correct serial-number password.

Get pdf PC Protector User’s Manual

G-DRIVE Q Installation Guide

G-DRIVE Q quad-interface external hard drives offer the ultimate in flexibility by providing FireWire 400, FireWire 800, USB 2.0 and eSATA ports all in a single unit. G-DRIVE Q is the perfect high-performance solution for storage intensive applications including audio/video editing, digital photography, MP3 libraries and high-speed data back up. The system features a fan-less cooling system and the latest technology 7200 RPM SATA II hard drive with up to 32 MB of cache.

The disk drive contained in your G-DRIVE Q is a delicate electronic instrument and is susceptible to damage due to excessive physical shock. Place the unit in a vented area away from moisture or liquids. Please handle the unit with care. Do not open the case. Doing so will void the warranty. If the product is returned with damage caused by improper handling, the warranty will be void and liability will rest with the user.

Take a moment to ensure that the following items are included in the box. If anything is missing, please call G-Tech at (310) 449-4599. Please keep the shipping container and packing materials. In the unlikely event that you need to return G-DRIVE Q to us for any reason, you must use the G-Tech shipping container. If the product is returned damaged caused by improper packaging, the warranty will be void and liability will rest with the user.

Get pdf G-DRIVE Q Installation Guide

1080P Digital VGA RGB/HD Video Scaler HDV5 Model Operation Manual

Congratulations on your purchase of this digital video scaler HDV5 model. Our professional video scaler products have been serving the display industry for many years. In addition to video scalers, Ambery also offers a full line of PC Imaging Multimedia converters, TV video standard converters, audio video switches, A/V distributors, HDMI/DVI and other SD/HDTV video processor products. This HDV5 model marks great advance in our High Definition video converter series. It is an absolute must for all HDTV entertainment systems and computer image conversion product. By providing the all-in-one solution for HD video resolution scaling up or down, PC VGA to HD conversion plus multiple video format conversion between SD and HD. Maximize your HDTV investment by enhancing videos to the supreme 1080P progressive scan HD resolution for LCD/DLP projectors, projection TVs, Home Theater Systems, LCD/TFT/CRT monitors, LCD TVs, Plasma and all other flat panel displays for professional large screen presentation.

Product Features:
1. Total HDTV and HD PC solution with digital video outputs up to 1080P or 1920×1200 pixels for all digital flat panel displays.
2. Digital detail enhancement improves image details on a pixel-by-pixel basis, delivering SD that approaches HD quality.
3. Dual HDTV video scaling engines built in to ensure highest and sharp picture quality outputs.
4. Flexible analog RGB and digital RGB/HD outputs with selectable output Use +, - button to move highlight bar to your desired parameter, then press MENU/ENTER to enter into sub-menu of your selected parameter.
5. Ultra high bandwidth to ensure error-free inputs and noise-free outputs.
6. Seamless input switching between various video sources. Individual input selection buttons available from the remote controller for fast transition.
7. Native output resolution ensures most optimal display resolution on your screen. When “Native” is selected as the output resolution, the HDV5 will automatically detect the native resolution of the display and send out the most optimal pixel timing to match TV’s final display resolution.
8. Output picture adjustment on brightness, contrast, color, RGB level, and H-V position.
9. The DVI input is HDCP compliant which means if input is HDCP encrypted then DVI output is also HDCP encrypted.
10. Supports Overscan/Underscan modes for PC application and 4-level noise reduction(DNR) to product the clearest images

Get pdf 1080P Digital VGA RGB/HD Video Scaler HDV5 Model Operation Manual

TCPIP232 ATM Interface Operation Manual

TCPIP232 ATM Interface is designed to capture ATM transactions on ATM LAN system then convert caputered transactions to serial port to interface with VSSI-Pro (ATM Serial Interface) or Digital Video Recorder (DVR) which supports text insertion and overlays trasaction information to video.

There are 2 kinds of connection for TCPIP232
1. Stand alone with Digital Video Recorder
This connection will inteface directly to DVR which supported Text Insertion. This insertion will interface via RS232C only from TCPIP232 rear panel.So Please consult your DVR manual or contact DVR manufacturer.
2. VSSI-pro Interface
VSSI-Pro has also supported text insertion and programmable gray scale and background of text inesertion. User are able to define the ATM IP Address via Onscreen programming on VSSI-Pro Menu.

TCPIP232 Hardware Configuration:
TCPIP232 hardware operation depends on your network connection. TCPIP232 is able to operate with HUB and Network Switcher. There are 2 hardware configurations:
1. Mirror Mode
This Mode supports HUB and Programmable Network Switchers. The user needs to provide a port for TCPIP232 to capture ATM transactions on the HUB and needs to mirror the ATM LAN port for TCPIP232 port to capture data. This kind of switcher we called “ programmable network switcher” which is very expensive.
2. Tapping Mode.
The Tapping mode supports HUB and Typical Network Switcher. Tappping Mode captures ATM transactions by tapping receiving data at the ATM only. So HUB and Switch will not see TCPIP232 as a network device.

Get pdf TCPIP232 ATM Interface Operation Manual

CL4490-1000 Industrial 900MHz ConnexLink User’s Manual

The CL4490 uses Frequency Hopping Spread Spectrum modulation, where the units “hop” from frequency to frequency many times per second using a specific hop pattern applied to all the transceivers in the same network. A distinct hopping pattern is provided for each Channel Number, thereby allowing multiple networks to co-exist in the same area without interference.

CL4490 transceivers operate in a Point-to-Point or Point-to-Multipoint, Client-Server or Peer-to-Peer architecture. One transceiver is configured as a Server and there can be one or many Clients. To establish synchronization between transceivers, the Server emits a beacon. Upon detecting a beacon, a Client transceiver informs its Host and a RF link is established.

CL4490s implement a proprietary communication protocol to provide secure data transmissions. As it uses FHSS technology, the data remains reliable over long distances. Use of license free frequency bands ensure that the units are ready to use with no further certification requirements. Each unit is small and easily portable for use in mobile and temporary settings as well as for fixed installations. The CL4490 configuration software enables custom configurations based on unique application requirements.

Get pdf CL4490-1000 Industrial 900MHz ConnexLink User’s Manual

SDIO Wireless LAN Card SWLSDI-1100 User Manual

The SWLSDI-1100 is a compact size wireless card for the PDA’s and other mobile computing devices that support SD cards. The card supports various wireless LAN security protocols. It supports open, 64-bit and 128-bit WEP encryptions. Its Power saving features to maximize battery life makes it one of the best cards.

The only requirements are PDA/Pocket PC/Mobile Computing device with an SDIO slot running SDIO Now! and it can be used to access the Internet, email, and corporate servers.

You can access enterprise and public Wi-Fi (IEEE 802.11b) Wireless LAN systems from your Pocket PC/PDA/Mobile Computing device using the smallest and lightest form factor available. SWLSDI-1100 SDIO Low Power Wireless LAN Card is an industry leading SDIO card with state of the art technology that lets you wirelessly connect to Wi-Fi networks to access the Internet, email, and corporate servers.

The card is compatible with various WLAN security protocols. You can use the WLAN card with an open system or encrypted network with 40/64-bit or 128-bit WEP keys. The card is also compatible with 802.1x networks with EAP-TLS or PEAP, so you can connect securely without eavesdropping.

SWLSDI-1100 is SDIO Low Power WLAN Card , Battery Friendly®. When your Pocket PC is connected to a wireless LAN, the WLAN card is in idle (listening) mode about 90% of the time, with occasional short bursts of data being transmitted/received. Plus, SafeCom’s SDIO WLAN software offers a Power Save Mode. Using SafeCom’s card means that you’ll get the maximum possible battery life from your Pocket PC.

Get pdf SDIO Wireless LAN Card SWLSDI-1100 User Manual

C328R User Manual

The C328R is VGA camera module performs as a JPEG compressed still camera and can be attached to a wireless or PDA host. Users can send out a snapshot command from the host in order to capture a full resolution single-frame still picture. The picture is then compressed by the JPEG engine and transferred to the host thru serial port.

Features
Small in size, 20×28mm
VGA resolution, down sample to QVGA or CIF
3.3V operation
Low power consumption 60mA
User friendly commands to control the module
UART interface of up to 115.2Kbps
Auto detect baud rate and make connection to the host
Power saving mode
Various lens options

System Configuration
1. Camera Sensor
The C328R module uses OmniVision VGA color digital CameraChips with an 8-bit YCbCr interface.
2. OV528 Serial Bridge
The OV528 Serial Bridge is a JPEG CODEC embedded controller chip that can compress and transfer image data from CameraChips to external device. The camera interface synchronizes with input video data and performs down sampling, clamping and windowing functions with desired resolution, as well as color conversion that is requested by the user through serial bus host commands.
The JPEG CODEC can achieve higher compression ratio and better image quality for various image resolutions.
3. Program EEPROM
A serial type program memory is built-in for C328R to provide a set of user-friendly command interfacing to external host.

Get pdf C328R User Manual

KD25/35MA User’s Manual

This Century Corporation User’s Manual:
Features
- Copying and erasing contents of an HDD without a PC
- Functions as an external HDD, connected to a PC
- Eight modes (with new functions)
- In addition to 2.5- and 3.5-HDDs, S-ATA HDD can be used.
- Error-skip function
- Fast (Copying a 40 GB HDD takes about only 20 minutes.)
- Spin-up delay function (The disk 2 always spins up 10 seconds after the power is turned on.)
- Copying contents of an HDD of other operating systems than Windows and Macintosh (Whether starting up from the copied HDD depends on the OS.)

Disclaimer
- OS startup from the product is not supported.
- We are not liable for data loss, directly or otherwise, caused by using the product.
- The product is not designed for facilities or devices that require high reliability, including medical, nuclear and aerospace equipment.
- In no case are we liable for any trouble caused by using the product in such circumstances.
- The product may not function properly if placed near the radio, TV set or audio equipment.
- As the product is intended for use in Japan, we are not liable for any data loss or any problem caused by using it outside Japan.
- The product is designed for 2.5-inch and 3.5-inch IDEs and HDDs. Operability with CD-ROMs is not supported.

Get pdf KD25/35MA User’s Manual

Panel PC 1150 All-in-One 15.1” Super Slim Panel PC User’s Manual

The PANEL PC 1150 super slim industrial PANEL PC is mainly designed for industrial automation and some space-constricted embedded applications. For some space-concerned industries, a traditional PC with a separate main system, display monitor and keyboard is simply not integrated enough.

Ruggedly designed, the PANEL PC 1150 is 100% IBM PC/AT compatible and it integrates super I/Os, VGA, 15.1” TFT touch screen, Ethernet, and packs special industrial features like watchdog timer, CMOS double backup, all in a single system. The full PC functionality coupled with its industrial-grade construction easily tailors the system for any embedded applications and allows the system to endure continuous operation in any hostile industrial environments where stability and reliability are a must. Common applications of the PANEL PC 1150 include tooling machine, POI terminal, stand-alone KIOSK, medical instrument, mobile communication device and banking system - to name just a few.

Designed by the PC experts for PC professionals, the PANEL PC 1150 is virtually the ultimate one-step solution for your space-limited applications.

Get pdf Panel PC 1150 All-in-One 15.1” Super Slim Panel PC User’s Manual

TarCom datalogger for Tarom system, manager Installation and operation manual

The TarCom is used as datalogger and PC interface for all Tarom and PowerTarom systemmanagers. It stores up to 8000 data sets with all the systemparameters as voltage, currents, state of charge and system status. Additionaly you can use the analog input of the TarCom to trace for example radiation data. The alarm output switches exactly at the limits predefined by the user. All necessary cables and the comfortable PC software for windows are included. The TarCom installation is just plug and play.

The high impedance analog input can be used to attach a radiation sensor to the data logger. Any voltage source from 0 .. 150 mV can be logged together with the Tarom regulator data. The input range is calibrated in our factory but you can readjust these range via the PC program under menu options/calibration.

The alarm relais inside the TarCom is realised by a transistor with the collector on terminal 6 (+) and the emitter on terminal 5 (-). The transistor is able to switch maximal 50V and 50 mA. The alarm switches only when the TarCom logger receives data from the Tarom regulator ( ca. each minute). The minimum alarm time is so one minute.

Get pdf TarCom 01 datalogger for Tarom system, manager Installation and operation manual

CopperLink Ethernet Extender Model 2155 User Manual

The Patton Electronics CopperLink Ethernet Extenders provide high-speed LAN connections between peered Ethernet LANs, remote PC’s, or any other network enabled 10Base-T device.

Operating in pairs, a Model 2155/L (local) located at one end of the LAN extension and a Model 2155/R (remote) at the other end, these units can automatically forward LAN broadcasts, multicasts, and frames across a 2-wire voice-grade twisted-pair link.The data is passed transparently (unmodified) through the Ethernet Extenders.They operate as learning bridges and automatically add and delete MAC addresses; only passing packets across the CopperLink line that are meant for the remote peered LAN.

The 2155/L and 2155/R work together to create a transparent extension between two peered Ethernet LANs. Figure 1 shows a typical point-to-point application.

Because the CopperLink Ethernet Extender requires no configuration, it can be installed quickly. Installation consists of the following:
• Connect the line interface between the units (refer to section 3.1, “Connecting the Twisted-Pair Line Interface” on page 7) Note See Figure 2 for the rear-panel connectors locations.
• Connect the Ethernet interface (refer to section 3.2, “Connecting 10Base-T Ethernet Port to PC (DTE)” on page 8 or section section 3.3, “Connecting 10Base-T Ethernet Port to Hub (DCE)” on page 8).
• Connect the power plug (refer to section 3.4, “Connecting Power” on page 9).

Get pdf CopperLink Ethernet Extender Model 2155 User Manual

KXI-DVI-Bridge User’s Manual

This document describes the installation and specification of the KXI-DVI-Bridge. Details of the integration with Kaleido are available in the Kaleido user documentation. Please see “Compatibility” on page 15 for a list of Kaleido models that can be used with the KXI-DVI-Bridge.

Miranda’s KXI-DVI-Bridge performs live extraction of computer graphics to generate an SMPTE 292M compliant link meant for the Kaleido multi-image processor. Each unit provides two independent DVI-to-HD-SDI conversion processes. A firmware upgrade now allows the KXI-DVI-Bridge to also perform conversions of DVI signals from a Kaleido to HD-SDI formats.

Originally designed as a Kaleido input device, the KXI-DVI-Bridge converts a DVI signal to HD-SDI at a specific resolution and frame rate (1920×1080p @ 29.97 Hz)
1. This allows a Kaleido to accept inputs from a PC at larger VGA resolutions, up to 1600×1200
2. over a standard HD-SDI signal, without sacrificing quality.
The input resolution from the PC can be XGA, SXGA, WXGA, WSXGA+ or UXGA, but must have a 60 Hz refresh rate.

Basic KXI-DVI-Bridge Features:
• Dual Channel – pixel-to-pixel extraction on each discrete channel
• Two HD-SDI outputs per channel
• Auto-sensing DVI input
• One DVI loop output per channel
• Auto-sensing of input format within the Kaleido’s HD-SDI input
• Platform/OS independent
• Extend reach of DVI signal by using SDI wiring
• Ideal for static content such as the view of an automation system’s run-down list

Get pdf KXI-DVI-Bridge User’s Manual

DVI over CAT5e Extender CV-17 User Manual

The CV-17 extends your PC DVI transmission distance up to 60m/200ft with resolution 1024×768 @60Hz. With CV-17, users can transmit high quality digital video of PC applications through one cost effective CAT-5/5e to the remote monitor or projector, instead of using short and expensive DVI cables. With embedded EDID inside the adapter, your PC will continue to send the digital video even when the monitor is not connected. The user can then disconnects the monitor, place it in a remote location and reconnect it without rebooting the operating system.

The CV-17 includes two units: transmitting and receiving units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor. While successfully connected, the two LED lights on RJ-45 connector will blink. The transmission distance between the sending and receiving units can be up to 60m/200ft at XGA (1024×768) and 30m/100ft at UXGA (1600×1200). With compact size, CV-17 is the most cost effective choice for bringing your impressive digital video to the remote display.

Features
Package Contents
Technical Specifications
DVI 1.1 compliant
Handy DVI-D to RJ-45 Adaptor with programmable EDID feature
Extends the transmission distance from the sources up to 60m/200ft at XGA
(1024×768@60Hz) and 30m/100ft at UXGA (1600×1200@60Hz)
Minimize the cable skew by adjustable 8-level equalization knob
Supports 1080i/1080p HDTV resolutions & VESA standards
Receiving unit can learn EDID information for DVI/HDMI enabled display device

Get pdf DVI over CAT5e Extender CV-17 User Manual

Ultra Low Power GPS Bluetooth Receiver with Speed Camera Detector Functionality User’s Manual

Connecting to your Bluetooth PDA
1. Turn on the BT GPS Receiver
Press power button for 1 second, the LED2 (Power Status LED) and LED3 (Bluetooth Status) start blinking.
2. Activate Bluetooth function of your PDA / smart phone
Prior to activating the Bluetooth function of your PDA / smart phone, please make sure the device is equipped with Bluetooth function, and the driver software has been installed.
3. Activate Bluetooth Manager & Established New Connections
Illustrations by using HP 2100 PDA shown as follows:
I. First, find the device with which you wish to establish connection.
II. Open “Bluetooth Manager” on your PDA.
III. Press “New”.
IV. Press “Connect”.

Get pdf Ultra Low Power GPS Bluetooth Receiver with Speed Camera Detector Functionality User’s Manual

Rapid28iXL PIC Prototyping PCB User Manual

This is a PCB designed to facilitate the rapid prototyping of a device based on a 28 pin Microchip PIC microcontroller. To allow users to focus on their application, we take care of key housekeeping tasks associated with a microcontroller-based device. To this end, our PCB features several power supply options, an 28 pin footprint for the microcontroller, and several oscillator options. This board also supports in-circuit programming with a dedicated ICSP header. Users can construct their application circuit in our generous a generous prototyping area with space available for several IC’s and/or numerous discrete components.

Like our Rapid28i prototyping board, the Rapid28iXL board has common I/O components; it has the same 3 push buttons, 3 LEDs, and a buzzer. It also has a RS232 interface that can be jumper configured for DCE configuration for attachment to a PC, or as DTE for attachment to another prototyping board (no null modem cables required). See last page of this document for detailed serial interface information.

This board is constructed as a 2-layer through-hole board with clearly marked components on its silkscreen layer, and ample space between components so population of the board can be done by anyone with basic soldering skills.

Get pdf Rapid28iXL PIC Prototyping PCB User Manual

Electronic Gadgets Manuals

Archive

Labels