TCPIP232 ATM Interface Operation Manual
TCPIP232 ATM Interface is designed to capture ATM transactions on ATM LAN system then convert caputered transactions to serial port to interface with VSSI-Pro (ATM Serial Interface) or Digital Video Recorder (DVR) which supports text insertion and overlays trasaction information to video.
There are 2 kinds of connection for TCPIP232
1. Stand alone with Digital Video Recorder
This connection will inteface directly to DVR which supported Text Insertion. This insertion will interface via RS232C only from TCPIP232 rear panel.So Please consult your DVR manual or contact DVR manufacturer.
2. VSSI-pro Interface
VSSI-Pro has also supported text insertion and programmable gray scale and background of text inesertion. User are able to define the ATM IP Address via Onscreen programming on VSSI-Pro Menu.
TCPIP232 Hardware Configuration:
TCPIP232 hardware operation depends on your network connection. TCPIP232 is able to operate with HUB and Network Switcher. There are 2 hardware configurations:
1. Mirror Mode
This Mode supports HUB and Programmable Network Switchers. The user needs to provide a port for TCPIP232 to capture ATM transactions on the HUB and needs to mirror the ATM LAN port for TCPIP232 port to capture data. This kind of switcher we called “ programmable network switcher” which is very expensive.
2. Tapping Mode.
The Tapping mode supports HUB and Typical Network Switcher. Tappping Mode captures ATM transactions by tapping receiving data at the ATM only. So HUB and Switch will not see TCPIP232 as a network device.
Get pdf TCPIP232 ATM Interface Operation Manual
