AnyBus-S Serial Download Adapter Hardware manual
The data and illustrations found in this document are not binding. We reserve the right to modify our products in line with our policy of continuous product development. The information in this document is subject to change without notice and should not be considered as a commitment by HMS Industrial Networks AB. HMS Industrial Networks AB assumes no responsibility for any errors that may appear in this document.
ANYBUS® is a registered trademark of HMS Industrial Networks AB. All other trademarks are the property of their respective holders.
RS-232 connection to the PC
The AnyBus Download Adapter is set to RS232 mode as default from factory and no setting is required. This is the way the Download Adapter is normally used when connecting to a PC. If the AnyBus Download Adapter has been configured to another setting the RS232 can be set by selecting RS232 on the selection switch B1=1-2, the setting of B2 is irrelevant. Refer to Figure 1 for correct setting for RS-232.
Get pdf AnyBus-S Serial Download Adapter Hardware manual
