NORDIC Pool Conditioner Installation Manual
The Nordic Pool Conditioner is designed to maintain the humidity level in a pool area by dehumidifying the air in the pool room and depositing the energy absorbed into the pool water.
The pool conditioner will normally be placed in or near the pool room area since a supply and return duct system is required for proper operation. One common location is in the mechanical room where the pool circulator pump and filter are located. Since we will be using the pool circulation system to deliver heat to the water, piping can be kept as short as possible.
The mechanical room is also commonly located in or adjacent to the pool area which further facilitates the use of the shortest duct system possible for the unit. Horizontal style units can be easily suspended from the ceiling with a suitable hanger assembly. Care should be taken to insure that the unit is installed in a level position from front to back and from side to side. The condensate drain which will flow a steady stream of water (gravity flow) when the unit is in operation, should be piped back into the swimming pool via a separate 3/4” line to reduce the amount of make-up water required for the pool.
Storage of pool chemicals in the mechanical room is not recommended since their presence will generally cause premature corrosion problems with any metal equipment located therein.
Get pdf NORDIC Pool Conditioner Installation Manual
