M9 - Mini Pod External Storage Enclosure for 3.5” Serial ATA Hard Drives User Manual
The External Storage Enclosure “M9” is made of high quality plastic with a smart interactive cooling system, which automatically regulates and varies fan speed according to temperature of the hard drive. Available with various types of interfaces, this is the perfect solution for additional external storage. Features mentioned in this manual may vary between different models.
Product Dimensions:
16.51cm x 16.51cm x 5.08cm
6.5in x 6.5in x 2in
Hard Drive Assembly
1. Lift the top cover off the body.
2. Install the hard drive and connect the cables to your drive.
3. Turn the enclosure around and fasten the four screws.
4. Attach the thermal probe with the tape provided to the top of the drive, somewhere near the spindle motor.
5. Align the top cover with the body and push lightly into place.
Connection to your Computer
A few tips on how to use your external storage enclosure:
• The M9 was designed to be placed under a Mac Mini
• Do not cover the enclosure’s exhaust vent
• Do not expose the product to water or humid conditions
Hard Disk Mode
For M9-DX2, the disk drive will mount to the first connection that is presented. This will remain the default setting until the device is next restarted. For M9-S2 and M9-S2H, the eSATA connection has priority.
When not in use, turn off the power. This goes especially for the M9-S2 and M9-S2H model, because for those, only SATA II hard drives support stand-by. The M9-DX2 supports stand-by and will go into stand-by depending on the status of your Operating System.
Get pdf M9 - Mini Pod External Storage Enclosure for 3.5” Serial ATA Hard Drives User Manual
