The Motorola Netopia 2210-02 ADSL2+ Gateway Single-port Ethernet User Manual
Thank you for selecting the Motorola Netopia® 2210-02 ADSL2+ Gateway. This guide will help you set up and configure your network.
1.Windows users: Insert the Motorola Netopia CD into your CDROM drive. The Installation Guide Wizard should start automatically and the Welcome screen should appear to step through your connection installation(s).
The Motorola Netopia Installation Guide Wizard automates several tasks to get you up and running easily. Run the Wizard on every Windows-based PC that will connect to your net- work. Click the Next button. Follow the on-screen instructions to make all of your connections.
2.Locate the Modem near a power source, a DSL wall outlet, and in a location where air can circulate freely around it.
3.Connect the rounded end of the power supply to the power jack on the back panel of the Modem. Then, plug the power supply into an electrical outlet. The Power LED should light solid green.
4.Connect one end of the gray RJ-11 Phone cable to the port labeled “DSL” on the Modem. Connect the other end of the Phone cable to your DSL wall outlet.
5.Connect one end of the yellow RJ-45 Ethernet cable to the port labeled “Ethernet” on the modem. Connect the other end of the Ethernet cable to the Ethernet port on your PC.
You can access the Web-based configuration pages at any time as follows:
1.Run a Web browser, such as Firefox, Safari, or Microsoft Internet Explorer, and enter http://192.168.1.254 in the URL Address text box. Press Return.
Note: You may be prompted to select your language preference. If prompted, choose a language to continue.
2.For security purposes you must create a password for your Gateway. Enter a new password, repeat it, and click the Next button
Get pdf The Motorola Netopia 2210-02 ADSL2+ Gateway Single-port Ethernet User Manual
