ADM-XRC-PRO-Lite (ADM-XPL) Hardware Manual
The ADM-XPL (XPL) is an advanced PCI Mezzanine card (PMC) supporting Xilinx Virtex-II PRO™ (V2PRO) devices, the latest development in FPGA technology. The XPL supports 2VP7, 2VP20 or 2VP30 devices with either 1 or 2 embedded PowerPC processors. The XPL utilises an FPGA PCI bridge developed by Alpha Data supporting 64 bit PCI at up to 66MHz. Optionally, the XPL can be configured for 66MHz PCI-X as a factory option.
An on-board high speed multiplexed address and data local bus connects the bridge to the target FPGA. With 2VP20 or larger devices the local bus operates in 64 or 32 bit modes. The 2VP7 supports only 32 bits on the local bus. Memory resources provided on-board include DDR SDRAM, pipelined ZBT and flash, all of which are optimised for direct use by the FPGA using IP and toolkits provided by Xilinx.
Flexible I/O is the key to the ADM-XRC-II series of boards and the XPL is compatible with a wide selection of XRM modules that use the 180 pin Samtec interface. By default, the XRM-PRO-DEBUG with RS-232 and JTAG front panel debug ports is provided with the XPL to speed development cycles and eases bring-up.
Get pdf ADM-XRC-PRO-Lite (ADM-XPL) Hardware Manual
