ModemUSB/E12 User Manual
ModemUSB/E12 is a device designed for data transmission via GSM Network. The user- friendly design allows you to directly connect the device to one of the USB ports of your PC/laptops. Once a SIM card is inserted in the modem and the device is connected to the PC, you would be able to send SMS or access internet via GSM networks (mobile networks). ModemUSB/E12 supports the following data-bearers: CSD, GPRS, EDGE and SMS.
The device should not be connected to PC before the installation of the drivers. SIM card is mandatory for setting up connection to the GSM network. However, the manufacturer of this equipment does not supply the SIM card. The SIM card can be purchased from your GSM (mobile) service provider!
For APN, user name and password please contact your GSM (mobile) service provider. The modem must be unplugged from the PC while inserting or taking out the SIM card. If the SIM card will be inserted or taken out from the modem while it is still plugged to the PC – it may cause damage to the modem or the SIM card. In this case, the modem will not be replaced or repaired under guarantee.
The modem can be unplugged from the PC only if it is disconnected from the Internet and the MTC is properly closed.
If the modem is unplugged properly from the PC wait for at least 10 seconds before plugging it back to the PC. Otherwise restart your PC before inserting modem back. You can find additional CE marking on the newest modem models as well in internal SIM holder with maximal powering instructions on it.
Get pdf ModemUSB/E12 User Manual
