DPA III+ ISA -or- DPA III+ PC/104 Quick Start Guide
This guide explains basic DPA product installation. Refer to the manual on the installation CD for more details. The DPA package includes a DG Installation CD-ROM with the driver files necessary to use this product. You may need to install OEM software packages (diagnostic or otherwise).
The DPA unit needs the following PC hardware for operation:
• AT-compatible computer (or higher)
• Interrupt 5, 7, or 10 available
• I/O Address Range 200, 220, 300, or 320 available
• PC/104 hardware needs a free PC/104 Bus Slot
• ISA hardware needs a free ISA Bus Slot
To configure the DPA:
The DPA III ISA and PC/104 card uses jumpers to set the resources (IRQ and Base Address) that it will use. The DPA supports four base address choices and three IRQ selections, as defined in the section above (Information is printed on the ISA card for simple configuration.) Selecting the Interrupt and I/O Address Range for your hardware: Before installing the DPA PC/104 card, it is important to check your PC’s current configuration to identify an unused IRQ and address region. In Windows 95 or Windows 98, you may identify these regions using the device manager. In Windows NT, you may check the current configuration using the WINMSD.EXE program
Get pdf DPA III+ ISA -or- DPA III+ PC/104 Quick Start Guide
