HP NetServer LH 3000r Rack Cabling Reference Guide
This HP NetServer LH 3000r Cabling Reference Guide assumes that you have the rack assembly process completed, have mounted the HP NetServer LH 3000r, and are ready to cable the components in the rack enclosure. If you want a high-level checklist to use in this process, see Appendix A. For instructions on how to install the HP NetServer LH 3000r in a rack, consult the Installation Road Map shipped with your rack or the Installation Guide shipped with your NetServer unit.
NOTE
For instructions on how to assemble other components in a rack, please find and follow the documentation shipped with your rack components. If there is no such documentation with your rack and components, check the separately orderable installation kit. Or, use the generic rack assembly process described in this chapter.
Site Preparation
You may want to copy and use the site preparation checklist in this section (Table 1-1). Doing so before you begin to install and cable the NetServer may reveal actions you can take to support your success. Also be sure to read the section on site preparation of circuit breakers.
HP NetServer General Guidelines
Logical and physical network design provided
Server configuration parameters determined
Disk partition and directory structure determined
Required incoming power and data cabling in place
Working LAN, one working client, one working printer available (if integrating into an existing network)
Software license requirements met
Networking peripherals connected
Get pdf HP NetServer LH 3000r Rack Cabling Reference Guide
