Network Camera Installation Guide for i3 Navigator and Sea Ray Navigator
This installation guide is designed to assist i3 Navigator/Sea Ray Navigator dealers and technicians in installing network cameras aboard a vessel. Equipment setup, verification and troubleshooting are all covered.
i3 Navigator/Sea Ray Navigator
Except where noted, the instructions in this guide apply to both i3 Navigator and Sea Ray Navigator. The generic term “Navigation computer” is used throughout this document in place of these two product names.
On weekends, this telephone number is forwarded to a technical support assistant who can help in troubleshooting problems on a limited basis. Please note that weekend support may not always be immediately available. If you are asked to leave a voice mail message, someone will return your call as soon as possible.
The network camera option consists of one or more cameras connected to the Navigation computer’s display. The camera(s) can be controlled and viewed from both the primary and auxiliary Navigation computers (if applicable). Note: In some cases, cameras may have already been mounted and wired to the Navigation computer at the factory. If this is the case, the camera(s) still need to be configured to work with the Navigation computer. If cameras are already mounted on the vessel but are not yet working with the Navigation computer.
Get pdf Network Camera Installation Guide for i3 Navigator and Sea Ray Navigator
