Kodak EasyShare CX7310 digital camera
Using the camera screen as a viewfinder
IMPORTANT: The Liveview feature significantly depletes battery power; use it sparingly.
1 Turn the Mode dial to any Still mode.
2 Press the OK button to turn on the camera screen.
3 Frame your subject in the camera screen.
4 Press the Shutter button to take the picture.
5 To turn off the camera screen, press the OK button. To make the camera screen turn on whenever the camera is on, see Liveview, page 15.
Reviewing the picture or video just taken
After you take a picture or video, the camera screen displays a Quickview for approximately 5 seconds. While the picture or video is displayed, you can:
■ Review: If you take no action, the picture/video is saved.
■ Play (video): Press the OK button to play the video.
■ Share: Press the Share button to tag a picture/video for email, or as a Favorite, or to tag a picture for print (see page 25).
■ Delete: Press the Delete button while the picture/video and are displayed. Follow the prompts to delete the picture.
Using digital zoom
Use digital zoom in any Still mode to get up to 5X closer to your subject.
IMPORTANT: You may notice a decrease in printed image quality when using digital zoom. The blue slider on the zoom indicator pauses, then turns red when the picture quality is less than 1 MP. For an acceptable 4 x 6 in. (10 x 15 cm) print, ensure that the slider remains blue.
1 Press the OK button to turn on the camera screen, then press to activate digital zoom. The camera screen displays the zoomed image and the zoom indicator.
2 Press to zoom in or out (T -Telephoto or W - Wide).
3 Press the Shutter button to take the picture.
To turn off digital zoom, from the lowest setting, press .
NOTE: You cannot use digital zoom for video recording.
Get pdf Kodak EasyShare CX7310 digital camera
