Kodak EasyShare M1063/MD1063 digital camera
Using the framing marks
Framing marks indicate the camera focus area. The camera attempts to focus on foreground subjects, even if the subjects are not centered in the scene.
1 Press the Shutter button halfway.
When the framing marks turn green, focus is accomplished.
2 If the camera is not focusing on the desired subject (or if the framing marks disappear), release the
Shutter button and recompose the scene.
3 Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in all modes.When you use AF Zone and set Center Zone,the framing marks are fixed at Center Wide. Multiple framing marks may appear when faces are detected in Auto mode
Using optical zoom
Use optical zoom to get up to 3X closer to your subject.
1 Use the LCD to frame your subject.
2 Press Telephoto (T) to zoom in. Press Wide Angle (W) to zoom out. The zoom indicator shows zoom status.
3 Take the picture or video.
NOTE: For focus distances, see page 5
If you are not using zoom (1X, wide angle), you can be as close as 23.6 in. (60 cm) to your subject. In Close-up (wide angle), you can be as close as 0.10 m (3.9 in.) I As you zoom, you need to move further from your subject.
Using the digital zoom
Use digital zoom in any Still mode or during video recording to get up to 5X magnification beyond optical zoom for a combined zoom of 15X.
1 Press Telephoto (T) to the maximum optical zoom limit. Release the button, then press it again.
2 Take the picture.
NOTE: You may notice decreased image quality when using digital zoom. The slider on the zoom indicator turns red when the picture quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.
Get pdf Kodak EasyShare M1063/MD1063 digital camera
