mPanel v1 Installer Manual
Select a location that is close to an Ethernet connection. This Ethernet connection will be used to connect to your local area network (LAN). The LAN will provide data information for the Digital Control Interface (mControl) and Digital Media Interface (Music). Optionally, your Ethernet cable will be used for power, if you will be powering the mPanel using PoE. If you are not using PoE, select a location that is close to a power outlet, so that you can connect the mPanel power adapter.
Select a height that provide optimum viewing and touch operation.
To plan for mPanel wall mounting, use the following diagram, which shows the area required in the wall with the front panel installed
Mounting Instructions
IMPORTANT: Insure that all power is turned off during mounting. If you are using PoE, ensure that the Ethernet cable is unplugged at the PoE hub port. Install the speaker wires to the green connector provided, matching the left and right channels with accordingly, allow at least 6″ slack to the wire. Use minimum wire gage of 16AWG. After connecting the speaker wires to the connector, plug this connector into the mPanel speaker connector.
Get pdf mPanel v1 Installer Manual
