NewTELnet P800 User Guide
NewTELnet P800, the TELNET terminal emulator, is the ideal tool for the system manager to access his system remotely and work interactively via the command line. He does not need to be near his office, or even have a power plug near him. He just uses the TELNET connection via the TCP/IP stack in the Sony-ericsson P800. NewTELnet P800 has been fully tested with all the standard LINUX utilities, and supports all major escape sequences. The newTELnet application from NewNet Marketing for the P800 gives remote access to a system via Internet connected over the mobile telephone. NewTELnet P800 is compliant to all the important ANSI, VT100, VT2xx, VT52, TVI950, WYSE60, and ADM3A escape sequences and is therefore ideal to access a remote LINUX, or any other UNIX system.
Figure 1 shows the newTELnet P800 main screen immediately after it is started. The program version and registration status are shown at the top. This page lists pre- vious connections with the remote host address, and an optional name. The entry can then be called directly by selecting it, and pressing the Call button. This list is, of course, empty the first time that newTELnet P800 is started. A TELNET call can be made to other destinations by pressing the button (newTELnet), or the ping mode selected with the ping button.
Get pdf NewTELnet P800 User Guide
