iGPS-BT User Manual
iGPS-BT Setup (see walkthrough guides at the end of this section)
1. The iGPS-BT will need to be charged for two to three hours before initial use.
2. Turn on the iGPS-BT. The status indicator will blink as it searches for a Bluetooth connection.
3. Launch the Bluetooth configuration software on your mobile device. (This should be provided by the manufacturer of your Bluetooth device)
4. Have the Bluetooth configuration software search for any Bluetooth devices present. It should detect the iGPS-BT and list it as an available device (a “Pharos iGPS-BT” icon should be displayed).
5. Select the “Pharos iGPS-BT” device. Depending on your Bluetooth software, this should bring up a screen that will ask for a PIN Code or Security PIN. Enter the following PIN code: IMPORTANT PIN Code: 12345678 (Please memorize this code for future use)
6. After the PIN number is entered, a connection between your mobile device and the iGPS-BT should be established. The blue LED on the iGPS-BT dock will change from blinking to a steady glow.
7. Once a connection is established, check the properties of the iGPS-BT in the Bluetooth configuration software and make a note as to what number COM port is assigned to it. The navigation software that will be used will require this COM port number. Or check the COM port setting for your Pocket PC in the Quick Start Guide.
For more information regarding the iGPS-BT setup, please visit our Support Product Support Bluetooth Setup page at www.pharosgps.com
Hints & Tips
• GPS receiver must have a direct view to the sky. GPS receiver does not work well indoors.
• If possible, make sure the GPS is stationary when getting the initial satellite position lock. Allow 1-2 minutes at initial start-up for the GPS receiver to acquire a satellite lock for tracking.
• Make sure that the communication (COM) port is configured correctly in the navigation software being used to ensure proper functioning of the GPS system.
Get pdf iGPS-BT User Manual
