TELTONIKA ModemUSB/G10
In this document you will be introduced how to use ModemUSB/G10 device safely. We suggest you to adhere to following recommendations to avoid any damage to person or property. You have to be familiar with the safety requirements before starting to use the device! Modem USB/E10 is used for data transfer by GSM network. The modem is designed to be connected to a PC through USB connector. By connecting the modem to a PC it is possible to connect to the Internet using GSM data transfer channel. To avoid user injures that could be caused by heat or electrical voltage it is important to follow safety requirements listed below.
Installation and technical support of the device can be performed only by a service personnel or a person who has enough knowledge about this device and safety requirements.
The PC to which the ModemUSB/G10 device is to be connected must have a USB port confirming to USB 2.0 standards. Modem is supplied from +5V DC USB port. The PC to which the device is connected shall comply with the requirements of standard EN 60950-1. ModemUSB/G10 modem can be used on first (Personal Computer) or second (Notebook) computer safety class.
To avoid mechanical damage of the device, it is recommended to transport the device packed in damage-proof pack. While using the device, place it such that the LED is visible to the user. It’s because this LED provide information about the working modes and condition of the device. Signal level of the modem depends on the environment in which it is working.
Get pdf TELTONIKA ModemUSB/G10
