TC-S9 Tape Deck Service Manual
This set is a component of the MHC-S9D. The MHC-S9D system configuration is as shown below, and there- fore it does not operate normally unless all four components are connected. In performing the repair, connect all components with the system cables.
Note: The precaution to the users is described on the label stuck on the back panel (DVD/video CD/CD player) and in the troubleshooting section in the Operation Manual
TAPE MECHANISM DECK DISCRIMINATION
TCM-230AWR41 and TCM-230MWR41 are used for the tape mechanism deck of this set, and they can be discriminated as shown below.
Mechanical Adjustments
Precaution
1. Clean the following parts with a denatured alcohol-moistened swab: record/playback heads pinch rollers erase head rubber belts capstan idlers
2. Demagnetize the record/playback head with a head demagnetizer.
3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to the parts adjusted.
5. The adjustments should be performed with the rated power supply voltage unless otherwise noted
Get pdf TC-S9 Tape Deck Service Manual
