KVM-9005 KVM Cat5 Extender User Manual
KVM Cat5 Extender is designed to control the PC, Server or KVM Switch up to 500 feet away from your Keyboard, Mouse and VGA monitor. KVM-9005T transmitter is to synthesize the signals of PS/2 keyboard, PS/2 mouse, and VGA monitor for being easily transmitted to a long distance over popular Ethernet CAT5 cable. KVM-9005R receiver is to take the synthetic signal and return it back to the signal s of PS/2 keyboard, PS/2 mouse and VGA monitor respectively.
KVM-Cat5 is a good solution for those noisy server room environment where is unsuitable for people to work for a long time, besides, it facilitates effective management on dispersive computers through one dedicated central control room, demonstration room, meeting room, or at your desk. CAT5 STP cable (Shielded Twisted Pair)/ UTP cable (Unshielded Twisted Pair) or enhanced cable like CAT5E/CAT6 cable is applied to LAN network popularly. KVM-9005 uses the same existing network construction to transfer local console signal to remote side. KVM-9005 allows you to move your console, i.e. Keyboard, Mouse and VGA monitor, to a suitable place for centralized control conveniently over LAN network. You just need to install a pair of extender, the transmitter and receiver, into local side and remote side respectively. It also saves your cable layout and installation cost.
Features:
Compact desktop size
Work with single PC, as well as the console port and PC port of KVM Switch
Work with CAT5, CAT5e, or CAT6 Ethernet cable
Distance up to 500 feet
Support standard 3-in-one KVM switch cable
Easy to install and friendly to set up the video signal via adjustable knobs.
Compatible with DOS, MS Windows, Linux, Unix, and Netware
No software required
High VGA resolution up to 1280 X 1024 (CAT5 cable up to 500 feet approximately)
LED indications for Power on/off and data transmission
Get pdf KVM-9005 KVM Cat5 Extender User Manual
