AirStation WHR-HP-G54 High-Power Wireless Cable/DSL Smart Router User Manual

AirStation WHR-HP-G54 High-Power Wireless Cable/DSL Smart Router User Manual

Work and play - further and faster! Eliminate dead spots and enjoy faster connections with vastly extended range from Buffalo Technology’s amazing wireless solution, the AirStation High Power Wireless Broadband SmartRouter.

System Requirements
• A high-speed (Broadband) Internet connection or existing local area connection.
• A computer with a network connection (wired or wireless) and a good web browser. The screenshots in this manual were taken with Firefox, but Netscape and Internet Explorer are also supported in versions 4.5 or later, and Safari 1.0 and later are supported with Macintosh OS X 10.2 and later.

AirStation WHR-HP-G54 Package Contents
The AirStation WHR-HP-G54 package contains the following items:
• WHR-HP-G54 Base Station
• Antenna
• AC adapter and power cable
• CAT5 LAN cable
• Utility CD with Manual
• Quick Setup Guides
• Warranty Statement

Begin by finding a good place to set up your router/access point. Some things to consider:
• You’ll need to be able to plug your internet connection into it, so it should go within reach of the LAN cable from your DSL or Cable modem. You’ll also want a power outlet nearby.
• Keep the access point as central in your work area as possible. Signal strength and speed fall off with distance.
• Higher is often better. For instance, set it up on the top shelf of a bookcase rather than the bottom one, if possible.

Get pdf AirStation WHR-HP-G54 High-Power Wireless Cable/DSL Smart Router User Manual

Programmable POS Keyboard User’s Manual

Programmable POS Keyboard User’s Manual

Main Features
65/78/111/118 keys programmable keyboard with mechanical stroke using full-height Cherry key-switch
True keyboard wedge function; operating with or without the normal pc keyboard
With internal metal plate for key fixation, better to protect against ESD
Multi-Layer programming capability
No TSR program required; avoids application software crashes
Character sets supports: - All alphanumeric characters
- 12 functions keys
- All IBM keyboard special keys (Shift, Ctrl, Alt, Esc etc.)
- 255 ASCII codes
Selectable program mode in ASCII code or SCAN code Each key can be programmed up to 255 bytes, depending on the size of the built-in non-volatile memory
Can be cascaded with a normal PC keyboard, barcode interfaced or magnetic card reader through the built-in PS/2 port
Each key can be programmed as either strings or single letter key-assignment

MagStripe Reader Features (optional):
Comply with ISO 7812, IBM standards, American Driving License
Support multi-country code settings
Support programmable MSR setting for the header, tailor, separator, suffix and prefix, track sequence
Track 1: 210BPI with max 76 characters
Track 2: 210BPI with max 107 characters or 75BPI with max 37 characters
Track 3: 210BPI with max 107 characters
Card swipe speed: 10 to 100 cm/sec.
500,000 swipe cycles
Available Configuration
Dual Track: Track 1 & 2 or Track 2 & 3
Triple Track: Track 1, 2 & 3

Get pdf Programmable POS Keyboard User’s Manual

EtherUSB USB Ethernet Access Point for PDA User Manual

EtherUSB USB Ethernet Access Point for PDA User Manual

The EtherUSB™ EA104 is a USB Ethernet Access Point for connecting PDA and smartphone with Windows Mobile for Pocket PC 2003/2003SE operating systems (OS), CE5.0, CE.NET4.1/4.2 and Windows Mobile 5.0 (see Appendix B) to an Ethernet network. Connection is established using a PDA USB cradle or with USB cables via the PDA USB port to10/100 Base-T Ethernet network. EA104 belongs to EtherUSB™ product line.

EA104 is equipped with 4 USB host ports and four 10/100 Base-T ports, one for uplink to the Ethernet network and three for optional connection of PC or computing devices. EA104 provides TCP/IP-based network connectivity for up to 4 PDA devices simultaneously using a PDA USB cradle or USB cables and the server side 10/100 Base-T network

Each connected PDA can perform server synchronization, Internet browsing, and file transfer. This solution provides an alternative network connection other than WiFi, while offering higher security and reliability standards. It works perfectly for the mobile users, field application personnel, and any environment that requires a high level of security and reliability. 500mA power provided to each USB port enables recharging of PDAs while connected.

HARDWARE INSTALLATION
Please confirm the following items have been included in the shipping box with the main product.
1. EA104 main unit
2. 180cm (6’) Ethernet cable
3. 5VDC/3A power adapter, 2.1×5.5mm plug, center positive polarity
4. A paper notice that indicates the website from which to download the EA104 Users Manual (this manual), Data Sheet and about WM5.0 device connection

Get pdf EtherUSB USB Ethernet Access Point for PDA User Manual

Op-Torq Field Test System Installation and Operation Manual

Op-Torq Field Test System Installation and Operation Manual

The Op-Torq Field Test system is designed to work in conjunction with Binsfeld Engineering’s TorqueTrak series (10k, 9000 and Revolution) Torque measurement sensors. It’s a specialized data acquisition system based on a software with powerful graphical tools and a USB acquisition module to measure torque and rpm (optional).

PC / Laptop with Op-Torq Field Test software
The Op-Torq Field Test software has to be installed on a PC / Laptop running on Windows XP or Vista. The PC / Laptop have to be supplied by the customer. The software allows a simple and straight forward data acquisition from the TorqueTrak series instruments. It also allows combining RPM measurement to the torque measurement to obtain power values.
RS 232 / USB converter
The RS-232 / USB converter allows connection to computers that are not equipped with RS-232 ports. It also allows auto-detection of the connected components.
RPM / Analog acquisition module
The acquisition module converts analog and pulse signals to RS-232 to allow communication with the computer.
It is used for the following configuration:
- TT10K with optional RPM measurement
- TT9000
- TT Revolution
For TT10K without RPM measurement, this module is not used even if two TT10K are used.
Cabling
The cables required for operation are supplied with the system, except for TT Revolution configuration, the analog signal cable have to be supplied by the customer or added to the order.
TorqueTrak instruments
The TT series instruments are available from Binsfeld Engineering.
RPM pickup (optional)
The RPM pickup is included in the RPM measurement option. It is mounted on an adjustable magnetic base for fast and accurate mounting and positioning for shaft rpm measurement. A set of four powerful permanent magnets are also supplied with this option. The number of magnets to install on the shaft is function of the measured rpm value.

Get pdf Op-Torq Field Test System Installation and Operation Manual