Op-Torq Field Test System Installation and Operation Manual
The Op-Torq Field Test system is designed to work in conjunction with Binsfeld Engineering’s TorqueTrak series (10k, 9000 and Revolution) Torque measurement sensors. It’s a specialized data acquisition system based on a software with powerful graphical tools and a USB acquisition module to measure torque and rpm (optional).
PC / Laptop with Op-Torq Field Test software
The Op-Torq Field Test software has to be installed on a PC / Laptop running on Windows XP or Vista. The PC / Laptop have to be supplied by the customer. The software allows a simple and straight forward data acquisition from the TorqueTrak series instruments. It also allows combining RPM measurement to the torque measurement to obtain power values.
RS 232 / USB converter
The RS-232 / USB converter allows connection to computers that are not equipped with RS-232 ports. It also allows auto-detection of the connected components.
RPM / Analog acquisition module
The acquisition module converts analog and pulse signals to RS-232 to allow communication with the computer.
It is used for the following configuration:
- TT10K with optional RPM measurement
- TT9000
- TT Revolution
For TT10K without RPM measurement, this module is not used even if two TT10K are used.
Cabling
The cables required for operation are supplied with the system, except for TT Revolution configuration, the analog signal cable have to be supplied by the customer or added to the order.
TorqueTrak instruments
The TT series instruments are available from Binsfeld Engineering.
RPM pickup (optional)
The RPM pickup is included in the RPM measurement option. It is mounted on an adjustable magnetic base for fast and accurate mounting and positioning for shaft rpm measurement. A set of four powerful permanent magnets are also supplied with this option. The number of magnets to install on the shaft is function of the measured rpm value.
Get pdf Op-Torq Field Test System Installation and Operation Manual
