Kodak EasyShare V1233 zoom digital camera

Kodak EasyShare V1233 zoom digital camera

Deleting pictures/videos
1 Press the Review button.
2 Press for previous/next picture/video.
3 Press the Delete button.
4 Follow the screen prompts.
NOTE: To delete protected pictures/videos, remove protection before deleting. (See Protecting pictures/videos from deletion.)

Using the undo delete feature
If you accidentally delete a picture/video, you may be able to use Undo Delete to retrieve it. This feature is only available immediately after you delete a picture/video.

Protecting pictures/videos from deletion
1 Press the Review button.
2 Press for previous/next picture/video.
3 Press the Menu button.
4 Press to highlight Protect, then press the OK button. The picture/video is protected and cannot be deleted. The Protect icon appears with the protected picture/video.
■ Press the Menu button to exit the menu.

CAUTION:
Formatting internal memory or an SD or MMC card deletes all (including protected) pictures/videos. (Formatting internal memory also deletes email addresses, album names, and favorites. To restore them, see EasyShare software Help.)

Get pdf Kodak EasyShare V1233 zoom digital camera

Digital Camera Action Frozen

Digital Camera Action Frozen

Your Kodak digital camera can lock up in three ways:
• The camera does not turn on.
• The camera turns on, but does not boot up.
• The camera boots up, but does not respond to any controls.

The camera does not turn on
If the camera does not turn on, try the following steps:
1. Verify that the batteries are installed properly and press Power.
2. Install fresh batteries. Please refer to your camera’s User’s Guide for specific instructions.
3. Connect the camera to the AC adapter and press the Power button on the camera.

Batteries are not all alike, and each camera has its own recommendations for the best battery performance. See your camera’s User’s Guide for the specific battery recommended for your camera. In general, use batteries that are designed to work with devices that draw a lot of current. Kodak generally recommends Kodak Ni-MH rechargeable batteries for most Kodak digital cameras.

If your camera does not turn on, try the following:
1. Remove all sources of power (batteries and AC adapter) from your camera.
2. Remove the Kodak picture card or CompactFlash card.
3. Wait a few seconds.
4. Press the Power button twice.
5. Connect the appropriate Kodak AC adapter to your camera.

Note: If you don’t have the correct AC adapter, insert a set of fresh or fully charged batteries, according to instructions in your User’s Guide.

The camera does not boot up
Your digital camera goes through a boot up sequence much like a computer does. While the sequence is in progress, the Ready light on the camera blinks green. When the boot up sequence is complete, the green light goes out. If the Mode dial is set to Connect or Capture and the Ready light is read, the boot up process failed.

If this happens, check to see that the CompactFlash card or MMC/SD card is properly installed. If the card is missing or improperly installed, a NO CARD message appears on the Status Display on the top of the camera. If the CompactFlash card is properly installed, it could be corrupt. Reformat the card using a card reader or a PCMCIA card adapter in a Notebook computer. Remember, reformatting erases all information from the card

Get pdf Digital Camera Action Frozen

Kodak EasyShare P850 zoom digital camera

Kodak EasyShare P850 zoom digital camera

Using the auto-focus framing marks (pictures)
When using the EVF/LCD screen as a viewfinder, framing marks indicate where the camera is focusing. For the best pictures, the camera attempts to focus on foreground subjects, even if the subjects are not centered in the scene.
1 Press the Shutter button halfway. When the framing marks turn green, focus is accomplished.
2 If the camera is not focusing on the desired subject (or if the framing marks disappear), release the Shutter button and recompose the scene.
3 Press the Shutter button completely down to take the picture.

NOTE: Framing marks do not appear in Landscape, Night Landscape, Fireworks, or Video mode. When you use AF Zone (page 51) and set Center Zone, the framing marks are fixed at Center Wide

Using an external flash unit
Use an external flash unit when you want additional or specialized lighting (we recommend a Kodak external flash unit for fully automatic extended flash capabilities). You can use the camera’s built-in flash, as well, to provide extra fill flash.
1 Slide off the Hot-shoe cover.
2 Mount the flash unit to the Hot shoe.
3 Turn on the external flash unit.
The external flash unit is live when connected to the camera. The flash synchronizes at any shutter speed. Refer to your external flash unit user’s guide for details

Get pdf Kodak EasyShare P850 zoom digital camera

Kodak EasyShare CX7310 digital camera

Kodak EasyShare CX7310 digital camera

Using the camera screen as a viewfinder
IMPORTANT: The Liveview feature significantly depletes battery power; use it sparingly.
1 Turn the Mode dial to any Still mode.
2 Press the OK button to turn on the camera screen.
3 Frame your subject in the camera screen.
4 Press the Shutter button to take the picture.
5 To turn off the camera screen, press the OK button. To make the camera screen turn on whenever the camera is on, see Liveview, page 15.

Reviewing the picture or video just taken
After you take a picture or video, the camera screen displays a Quickview for approximately 5 seconds. While the picture or video is displayed, you can:
■ Review: If you take no action, the picture/video is saved.
■ Play (video): Press the OK button to play the video.
■ Share: Press the Share button to tag a picture/video for email, or as a Favorite, or to tag a picture for print (see page 25).
■ Delete: Press the Delete button while the picture/video and are displayed. Follow the prompts to delete the picture.

Using digital zoom
Use digital zoom in any Still mode to get up to 5X closer to your subject.
IMPORTANT: You may notice a decrease in printed image quality when using digital zoom. The blue slider on the zoom indicator pauses, then turns red when the picture quality is less than 1 MP. For an acceptable 4 x 6 in. (10 x 15 cm) print, ensure that the slider remains blue.
1 Press the OK button to turn on the camera screen, then press to activate digital zoom. The camera screen displays the zoomed image and the zoom indicator.
2 Press to zoom in or out (T -Telephoto or W - Wide).
3 Press the Shutter button to take the picture.
To turn off digital zoom, from the lowest setting, press .
NOTE: You cannot use digital zoom for video recording.

Get pdf Kodak EasyShare CX7310 digital camera