M9 - Mini Pod External Storage Enclosure for 3.5” Serial ATA Hard Drives User Manual

M9 - Mini Pod External Storage Enclosure for 3.5” Serial ATA Hard Drives User Manual

The External Storage Enclosure “M9” is made of high quality plastic with a smart interactive cooling system, which automatically regulates and varies fan speed according to temperature of the hard drive. Available with various types of interfaces, this is the perfect solution for additional external storage. Features mentioned in this manual may vary between different models.

Product Dimensions:
16.51cm x 16.51cm x 5.08cm
6.5in x 6.5in x 2in

Hard Drive Assembly
1. Lift the top cover off the body.
2. Install the hard drive and connect the cables to your drive.
3. Turn the enclosure around and fasten the four screws.
4. Attach the thermal probe with the tape provided to the top of the drive, somewhere near the spindle motor.
5. Align the top cover with the body and push lightly into place.

Connection to your Computer
A few tips on how to use your external storage enclosure:
• The M9 was designed to be placed under a Mac Mini
• Do not cover the enclosure’s exhaust vent
• Do not expose the product to water or humid conditions

Hard Disk Mode
For M9-DX2, the disk drive will mount to the first connection that is presented. This will remain the default setting until the device is next restarted. For M9-S2 and M9-S2H, the eSATA connection has priority.

When not in use, turn off the power. This goes especially for the M9-S2 and M9-S2H model, because for those, only SATA II hard drives support stand-by. The M9-DX2 supports stand-by and will go into stand-by depending on the status of your Operating System.

Get pdf M9 - Mini Pod External Storage Enclosure for 3.5” Serial ATA Hard Drives User Manual

Windows Data Acquisition Software Model 407001 User Guide

Windows Data Acquisition Software Model 407001 User Guide

Congratulations on your purchase of the Extech Model 407001 Data Acquisition Software Package that includes a CD-ROM and an interface cable. The software is dedicated for use with Extech’s Heavy Duty Meter Series. The 407001 software displays data in the following formats: Analog meter, Digital meter (with Max/Min readings), Data List, and X-Y Graph (for last 100 data points). Data is stored as a text file that can then be opened in spreadsheet and other software programs.

Hardware Connection
The Heavy Duty meter connects to a PC with the supplied DB-9 to 3.5mm mini-plug (mono) interface cable. The DB-9 end connects to the PC serial com port. The mini-plug end connects to the Heavy Duty meter .

Software Installation
NOTE: This program may require supporting files that are missing or more recent then those presently residing in the PC. If an error message appears during installation that indicates an update is necessary, go to the Microsoft web site (www.microsoft.com) to locate and perform the Windows Critical Updates and Service Pack Updates for the specific operating system.
1. Insert the supplied software disk in the computer’s CD-ROM drive.
2. Run the SETUP.EXE program included on the software disk.
3. When prompted, select a directory location for the program files.

Get pdf Windows Data Acquisition Software Model 407001 User Guide

H-ITT RX2200 instruction manual

H-ITT RX2200 instruction manual

The RX2200 communicates with all H-ITT 13 button Infrared (IR) clickers. The H-ITT acquisition program, version 1.9.1 or higher should be installed on your Computer to use all features of the RX2200. The software is free and can be downloaded from H-ITT.com. The RX2200 communicates with student’s clickers via infrared signals, much like your TV remote. As such, the RX2200 must be installed so that each seat in the classroom has a clear line-of-sight view so students can point their remotes at the RX2200 without having obstructions in the path.

In a typical classroom of 50 or fewer students a single RX2200 will provide full coverage when installed properly. In larger classrooms, multiple RX2200 units can be linked together and mounted strategically around the room so that the line-of-sight and the range of the IR communication link is maintained. The Initial set up is to make sure the RX2200 communicates with clickers, and interfaces through your PC to accept clicker responses. Once operation is established, then Mounting the RX2200 and testing to make sure all seats in a classroom have access to secure communications is suggested.

The RX2200 provides either USB or Serial communications ports. Connect either of these ports to your classroom PC (do not connect both). The USB connection provides power to the unit, so this is the only connection needed. If the serial port is used, the unit must also have an external power supply connected, H-ITT part# AC-9VDC-US, (or –INT for international power outlet types), a CAT5 cable from the RX2200 “OUT” port, and a CAT5 to DB9 serial adapter, H-ITT part# AC-ADPT-F. If using the USB port, you may need to install a driver for the USB port in your PC to communicate with the H-ITT response system software. (reference USB driver section below for more information).

Power up the RX2200 by connecting the USB cable to a PC (that is powered up) or connect the external power supply to the DC power jack. The RED power light will turn on. Once powered up, press a button (A/1 through J/0) on an IR clicker and notice the RED power indicator light blinks bright. This indicates the RX2200 is up and running and ready to operate. Test for communicating with the software: With H-ITT CRS, use the Acquisition program start up screen. Under Base units and Com ports (at the bottom of the screen) the clicker’s serial number and key pressed will appear to the right of the Com Port the RX2200 is connected to. With H-ITTShow, select the Com Port that the RX2200 is connected to from the Options>Keypad tab. Then click the Test button, the clicker’s serial number will appear in the test window when the A/1 button on a clicker is activated.

Get pdf H-ITT RX2200 instruction manual

IP POWER 9258SX USER MANUAL

IP POWER 9258SX USER MANUAL

IP POWER 9258S is a web controller which can be easily used in the industry field. With the remote network control technology, user can control or query the power supply of equipment. User can do this in any computer connected to the internet or local area network, there is no special program needed, also there is no need to open the external case of the computer.

Try to imagine that while traveling in a foreign country, you can control the power supply of your electric equipments, such as a computer, a server, a router, an entrance guard or security / surveillance system directly or use a time schedule comes with the IP POWER . You can remotely control the power switch with any computer connected to the network, which is not only convenient, but it also big saving on the manpower and time.

Get pdf IP POWER 9258SX USER MANUAL