MacBook Pro Memory Replacement Instructions Manual
Replacement Procedure
Notes:
DDR memory cards do not fit in this slot (different notch location). If installing two cards, install into the bottom slot first.
When finished installing memory into the bottom slot, use a black stick leveraged against the frame to push the back of the card toward the slot to verify that the card is firmly seated. Align the notch in the memory card with the tooth in the slot before inserting.
To install a memory card, insert the card at a 25-degree angle behind the locking tabs of the top slot.
Firmly push the card straight into the slot until it is fully and securely seated along its length.
Note: If the back of the card drops down before it is fully seated, raise it up enough to push it fully into the slot
When the card is fully seated, push the card straight down until the tabs click onto both sides of the card, locking it into place.
To ensure that the memory cards are fully and securely seated, for the lower card, use a black
stick leveraged against the frame to evenly push along the back of the card
For the upper memory card, push with your thumbs to verify the card is fully seated.
Check that the cards are secured by the brackets on both sides.
Install the memory door.
Replace the battery.
Use Apple System Profiler to verify that the memory is recognized. (Choose the menu bar Apple logo () > About This Mac, click More Info…, select the System Profile tab, open the Memory Overview.)
Get MacBook Pro Memory Replacement Instructions Manual
