PHR-100SU USB2.0 Hi-Speed/ SATA II Enclosure for 3.5” Serial ATA Hard Drive

PHR-100SU USB2.0 Hi-Speed/ SATA II Enclosure for 3.5” Serial ATA Hard Drive

Thank you for choosing the PHR-100SU aluminum SATA II/USB2.0 3.5″ Hard Drive Enclosure. This is an aluminum enclosure which supports 3.5” SATA I or SATA II hard drive. It is simple to install and comes with all the parts you need to create an external SATA II/USB2.0 device.
Based on SATA II, SATA I, USB2.0 and USB1.1 specifications the transfer rates are up to:
SATA II - 3.0Gb/s
SATA I - 1.5Gb/s
USB2.0 - 480Mb/s
USB1.1 - 12Mb/s

PHR-100SU can support the speed specification listed above, however its transfer rates are possible to be lower, and will vary depending upon the type of SATA and USB host controller, SATA Hard Drive and computer hardware.

Before you begin using the PHR-100SU, be sure to read this manual in its entirety.
This guide contains:
• SATA II/USB2.0 3.5″ Hard Drive Enclosure
• Hardware Installation
• Software Installation
System Requirements
• Windows PC, Macintosh desktop or NoteBook computer with available SATA and/or USB port
• MacOS X 10.2 and above for SATA connection, MacOS 9.2 and OS X for USB connection
• Windows 98SE/ Windows 2000/ Windows XP/ Windows Server 2003
* SATA connection is not supported under Windows98SE
• Pentium II/ compatible and above with 128MB RAM
• Both SATA II host port and SATA II hard drive are required for SATA II transfer speed
• USB2.0 host port is required for Hi-Speed USB2.0 transfer speed

Get pdf PHR-100SU USB2.0 Hi-Speed/ SATA II Enclosure for 3.5” Serial ATA Hard Drives

Portable Keychain Photo Album N1-101 Instruction Manual

Portable Keychain Photo Album N1-101 Instruction Manual

Thank you for purchasing the Nextar N1-101 Portable Keychain Photo Album.
Please
read this manual to get the optimum performance out of this product.
Quickstart Guide
NOTE: YOU MUST INSTALL INCLUDED SOFTWARE BEFORE ATTACHING YOUR PHOTO ALBUM TO YOUR PC.

Software Installation:
1. Insert the included CD into your PC’s CDROM drive
2. Open “My Computer” and find the CD you just inserted. It will appear similar to the image below:
3. Double click the CD drive icon to open the CD.
** NOTE** THE ACTUAL DRIVE LETTER (D IN THIS CASE) COULD BE DIFFERENT ON YOUR PC. LOOK FOR THE DRIVE THAT IS THE CDROM ON YOUR PARTICULAR PC
4. Double click the “Digital Photo Frame Tool folder icon. Inside that folder, double click the “PhotoViewer vX.XX Setup (without bios).exe” icon. NOTE:
THE EXACT REVISION NUMBER OF THE VERSION ON YOUR CD COULD BE DIFFERENT THAN IN THE PHOTO BELOW
5. You will see the following screen: Using the DOWN navigation button on the side of the unit, move the cursor down to the USB Update position:
Then press the MENU (top) button to select the Update mode. The following screen will appear…

Get pdf Portable Keychain Photo Album N1-101 Instruction Manual

STM-19LV/17LV Professional Security LCD Monitor Instruction Manual

STM-19LV/17LV Professional Security LCD Monitor Instruction Manual

Before operating this product, please read the instruction manual.
1. Unplug this product from the wall outlet before cleaning.Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
2. Do not use this product near water.
3. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product.
4. Slots and openings in the cabinet and the back are provided for ventilation: to ensure reliable operation of the product, these openings must not be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a heat register.This product should not be placed in a built-in installation unless proper ventilation is provided.
5. This product should be operated from the type of power source indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.
6. This product is equipped with a 3 wire grounding type plug having a third(grounding) pin. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.
7. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.
8. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating. Also, make sure that the total of all products plugged into the wall outlet does not exceed 10 amperes.
9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill any kind of liquid on the product.
10. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to service personnel.

Get pdf STM-19LV/17LV Professional Security LCD Monitor Instruction Manual

MICRO-AMP Version 2.0 VHF Amplifier Manual

MICRO-AMP Version 2.0 VHF Amplifier Manual

This manual is for the Micro-Amp low power amplifier intended for use with the Micro-Trak APRS transmitters. The amplifier is a transmit-only device, meaning it is not suitable for use with transceivers. The amplifier was designed for low duty cycle operation, and does not have a heat sink suitable for continuous operation. The Micro- Amp is intended only for use only in the Amateur Radio Service.

The Micro-Amp utilizes very few components. The assembly of the PC board should start out with the installation of the two 22 Microfarad chip capacitors. The easiest way to install these devices is to first lightly tin the pads on the top side ground plane (the sides not connected to the traces) place the chip capacitor over the pad. Hold down the chip, and apply your soldering iron to the ground plane side pad. The surface of the pad will melt the solder on the chip, and tack that end down temporarily. Solder the opposite side pad down by heating the pad and capacitor end pad equally, and applying solder. Note that the 22 Mfd capacitors are polarized and must be installed in the correct orientation.

Install the 4700 PF capacitors in the spots as shown on the PCB layout and photo. Note that these are not polarized. Install the 10 Pf capacitor as shown in the circuit board layout and photos. Note that this capacitor is tipped with a black mark, which will distinguish it from the smaller 4700 PF capacitors. Polarity of this part is unimportant. Install the 1N914 or equivalent diode. This diode is for reverse polarity protection. Install the trimmer potentiometer and the three screw power terminal. NOTE: Make sure you point the recesses in the terminal block outward! It will be difficult to wire the unit if you install this part backward.

Get pdf MICRO-AMP Version 2.0 VHF Amplifier Manual