ADB Focus Universal Remote Instructions Manual

ADB Focus Universal Remote Instructions Manual

Congratulations on your purchase of the FOCUS 3-MODE Universal Remote Control. By choosing the FOCUS 3-MODE remote you have opted for the User Friendly remote control solution. Made according to the highest quality, the FOCUS 3-MODE will provide you with long-term satisfaction. Please read these enclosed instructions carefully before putting your FOCUS 3-MODE to use.

Batteries
Your FOCUS 3-MODE Remote requires 2 new “AA/LR6″ Alkaline batteries.
1. Push and slide the battery door downwards and lift it up to remove it.
2. Match the batteries to the (+) and (–) marks inside the battery case, then insert the batteries.
3. Place the battery cover by sliding upwards and allowing it to click back into position.
- It is recommended that you do not use rechargeable batteries.
- On the inside of the battery compartment door you will find a label on which to write your Set-Up Codes for future reference.

The Keypad
Please refer to the picture of the UNIVERSAL FOCUS 3-MODE Remote Control.
1. Device Keys:
The TV, DVD & STB keys select the home entertainment device you wish to control. For example, pressing the TV key allows the remote to control the functions of your television. Pressing the DVD key allows the remote to access either DVD or VCR devices.
2. LED:
During the use of your FOCUS 3-MODE, the LED under the corresponding device key will light up red.
3. AV Key:
The AV key operates the same function it did on your original remote.
4. Menu Key:
The Menu key brings up the menu of the device that is selected.
5. Power Key:
The Power key powers whatever device is selected. Select TV, Power to turn your TV on and off.
6. Shift Key:
The Shift key is used to set-up your FOCUS 3-MODE Remote Control and to access special functions.
7. Number Keys:
The Number keys (0-9) provide the functions just like your original remote, such as the direct access to program/channel selection.
8. Guide Key:
After pressing the STB device key, the Guide key brings up the on-screen TV Guide.

Get pdf ADB Focus Universal Remote Instructions Manual

The Image Mechanics Fluid Mount Scanner tray for the Nilkon Super Coolscan 8000/9000

The Image Mechanics Fluid Mount Scanner tray for the Nilkon Super Coolscan 8000/9000

Our patented Fluid Mount Tray is designed to improve the quality of scans available from a Nikon™ 8000 and 9000 scanners. Made from a genuine Nikon scanner tray to ensure perfect operation, it allows you to fluid mount your film (from 8mm to 2 1/4 and everything in between) for the best possible scans.

Note: While our product is carefully crafted to prevent damage to your scanner, the scanner is not intended for use with fluid mounting systems. Use of this product may void the warranty of your scanner. Image Mechanics and Freestyle makes no warranties against damage to your scanner. USE THIS PRODUCT AT YOUR OWN RISK. Please test the seal of your tray by putting it on dry newspaper and filling it below the top of the tray with WATER (ONLY) overnight. DO NOT USE KAMI OR OTHER SOLVENTS TO TEST THE SEAL OF THE TRAY. If the tray leaks through any of the doublesealed seams, Image Mechanics and Freestyle will replace it free of charge.

OPERATION INSTRUCTIONS
Fluid Mounting:
1) Clean the glass with a non-ammonia glass cleaner such as Sprayway Glass Cleaner using your Webril lint-free wipe. Ammonia is not archival and not recommended around any photographic material. Do not use any cleaner, including ammonia, that might damage the silicone adhesive used to secure the glass plate in the film holder (such as nail polish remover, lighter fluid, etc.) .
2) Thoroughly dry the entire film holder using compressed air or a lint-free cloth. Also use the compressed air to remove any surface particles from the top and the bottom of the glass.
3) Make sure you have the proper side of the tray up first. Place a few drops of Kami fluid where you intend to place the film on the tray. Use the compressed air to remove the particles from the film itself on both sides and then place the film on the fluid. Keep the film square to and centered between the side lines. Also, the scanner will scan film easier when the film is closer to the front of the tray (the end which is inserted into the scanner). For example, with 6X9 cm film only the two images closest to the front can be easily scanned. Note that the masked side lines on the scanner glass are intended to indicate the APPROXIMATE maximum boundary of the scan area. For best results, when mounting film to the glass plate of the scanner you should keep your film centered between the aid lines and parallel to the side line. Note that the side lines are intended as guides only and may be slightly off-center, or slightly off “true”. Also, there needs to be just a few drops of fluid, enough to make its way under the film. Do not soak the tray in fluid, it wastes fluid and can damage the scanner.

Get pdf The Image Mechanics Fluid Mount Scanner tray for the Nilkon Super Coolscan 8000/9000

UniClamp Instructions

UniClamp Instructions

Here we’ll demonstrate, using our Nikon CP 950. The purpose of the photo is to show the Camera Tripod Mount Platform attached, and alignment of the Center Line of the UniClamp with respect to the center line of the Camera Lens. With this type of camera, the lens is fixed (doesn’t move in or out) and we’re going to continue to bring the UniClamp closer until they actually meet. Please remember that no locking Thumb Screws are tight at this point, if they were, you could not make the adjustments needed and possibly damage the camera.

In this photo, the final adjustment is made. This adjustment is centering the camera lens in reference to the center of the UniClamp Adapter. Don’t become frustrated, it takes a little practice because you are moving in 3 directions at the same time. Once you feel you have proper alignment, now tighten the Thumb Screws in the following order. Camera Tripod Mount Platform, The Thumb Screw on the Camera Tripod Mount Platform, and then the Thumb Screw on the UniClamp Adapter (Do Not Disturb the 3 Thumb Screws on Body of the UniClamp Adapter). During this process, things can have a tendency to move, so you will need to correct for those adjustments, but make them from a loose perspective as trying to force things while they are tight could cause damage to the Adapter and Camera (meaning, if you have loosen the Thumb Screws that you just tightened, do so).

Now replace assembly on Microscope Eyepiece. Being careful not to crash the Microscope Eyepiece into the Camera Lens and tighten the loosened Thumb Screw.

Get pdf UniClamp Instructions

Keeler Slit Lamp Instructions

Keeler Slit Lamp Instructions

Keeler Slit Lamps are instruments designed to give a very high level of performance. In order to ensure you gain the maximum benefits from your Keeler Slit Lamp we suggest that you read this instruction manual carefully before assembly or use. Please be sure to check all warning or rating labels on your Slit Lamp.

Main features of Keeler Slit Lamps
• Keeler Slit Lamps are combination of outstanding optical performance combined with elegant yet functional design.
• Quality optics to reduce eye fatigue and to ensure clear crisp images.
• X-Y-Z base with single joystick control.
• Stereo microscope body with magnifications of x10 and x16, x6 to x40 or x6 to x33 zoom depending on model.
• Accessories for attaching digital cameras, cctv cameras, teaching tube. Tonometers.
• Tilt facility 5°, 10°, 15°, 20° (Tower illumination systems only).
• Optional filters, diffusers.
• Optional measuring eyepieces.

Get pdf Keeler Slit Lamp Instructions